custom-paper-feed-dim

HP-LASERJET-COMMON-MIB · .1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.8

Object

scalar mandatory r/w Integer32

Sets the printer's custom paper dimension in the feed
direction (direction parallel to the direction of paper
feeding).  The value for this object is specified in
micrometers or tenthousandths of an inch, depending upon
the value of CUSTOM-PAPER-DIM-UNIT.  The valid range is
engine-dependent and should be documented in the POS for
each product.
Additional information:
The valid range for LaserJet 4000 Series is 50000 to 140000 if 
CUSTOM-PAPER-DIM-UNIT is eTenThousandthsOfInches or
127000 to 355600 if CUSTOM-PAPER-DIM-UNIT is ePmicrometers.
Attempts to set this object outside the valid range will result
in a return value of <badValue>.

Context

MIB: HP-LASERJET-COMMON-MIB
OID: .1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.8
Type: scalar
Access: readwrite
Status: mandatory
Parent: settings-intray
Siblings: 5

Syntax

Integer32

Source: COPS-PR-SPPIInteger32
Base type: Integer32

Values & Constraints

Enumerated Values

`1`	eUSExecutive
`2`	eUSLetter
`3`	eUSLegal
`11`	eLedger
`15`	eStatement
`17`	eROC16K
`25`	eISOandJISA5
`26`	eISOandJISA4
`27`	eISOandJISA3
`34`	ePRC16K195X270
`45`	eJISB5
`46`	eJISB4
`81`	eCommercial10
`89`	ePRC16K184X260
`90`	eInternationalDL
`91`	eInternationalC5
`100`	eInternationalB5
`101`	eCustom
`110`	eJapanseEnvLong3
`32767`	eUnknownMediaSize

Type Constraints

range: -2147483648..2147483647

Related Objects

Sibling Objects

Object	Type	Syntax	OID
default-manual-feed mandatory Returns or changes the default manual feed value used by the PDLs.	scalar	Enumeration	`.1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.4`
mp-tray mandatory Returns or changes the value of the multi-purpose (MP) tray configuration variable. The MP tray can be configured to operate as an additional input tray (eCassette), a manual fee…	scalar	Enumeration	`.1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.5`
tray-lock mandatory Returns or changes the list of locked input trays. The printer only pulls media from a locked input tray when the input tray is specifically requested by the print job. Additiona…	scalar	OctetString	`.1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.6`
custom-paper-dim-unit mandatory The units of measure used to specify the width and height of the printer's custom paper. The unit of measure of eTenThousandthsOfInches is 0.0001 inches. Additional information: …	scalar	Enumeration	`.1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.7`
custom-paper-xfeed-dim mandatory Sets the printer's custom paper dimension in the cross- feed direction (direction ninety degrees relative to the direction of paper feeding). The value for this object is specifi…	scalar	Integer32	`.1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.1.9`