hpicfDhcpSnoopOpt82RemoteId

HP-ICF-DHCP-SNOOP-MIB · .1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.9

MIB view Table view

Object

scalar r/w Enumeration

This object configures the value that will be
used for the remote ID sub-option of the relay
information that will be inserted by
DHCP snooping. The possible values are:
  mac      - switch MAC address,
  subnetIP - switch IP address on the VLAN on
             which the DHCP packet was received,
  mgmtIP   - switch IP address on the management
             VLAN.
The value of this object is ignored unless DHCP
snooping is enabled and hpicfDhcpSnoopOpt82Insert
is true. The default value is mac.

Context

MIB: HP-ICF-DHCP-SNOOP-MIB
OID: .1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.9
Type: scalar
Access: readwrite
Status: current
Parent: hpicfDhcpSnoopGlobalCfg
Siblings: 15

Syntax

Enumeration

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
hpicfDhcpSnoopEnable The administrative status of the DHCP Snooping feature.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.1`
hpicfDhcpSnoopErrantReplyEnable The operational status of hpicfDhcpSnoopErrantReply notifications. The default value is 1 (Enabled). A value of 2 represents Disabled. Writing this object requires authentic…	scalar	Enumeration	`.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.10`
hpicfDhcpSnoopDatabaseFTPort A location to store the port value of the FT Server. The default port value will be 69 for TFTP and 22 for SFTP.	scalar	Unsigned32	`.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.11`
hpicfDhcpSnoopDatabaseSFTPUsername A location to store the Username of the SFTP Server. The default value of username is root.	scalar	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.12`
hpicfDhcpSnoopDatabaseSFTPPassword A location to store the Password of the SFTP Server	scalar	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.13`
hpicfDhcpSnoopDatabaseValidateSFTPServer This object sets the validate-sftp-server flag. When enabled, the user must login to the SFTP server to verify and accept the public key of the server. When disabled, the public…	scalar	Enumeration	`.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.14`
hpicfDhcpSnoopAllowOverwriteBinding When set to true, allows DHCP Snooping binding to be overwritten for the same IP address. When a DHCP server offers a host an IP address and if this address is already bound to an…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.15`
hpicfDhcpSnoopRateLimit This object sets the DHCP packet transfer rate. This rate limit is applicable only when DHCP snooping is enabled. The default rate is 100 packets per sec.	scalar	Integer32	`.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.16`
hpicfDhcpSnoopVlanEnable The administrative status for DHCP Snooping on each VLAN. There will be one bit in this string for each possible VLAN ID. Each octet within this value specifies a set of eight V…	scalar	OctetString	`.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.2`
hpicfDhcpSnoopVerifyMac When this variable is set to 'true', DHCP Snooping will verify that the MAC address in the chaddr field of the DHCP header matches the source MAC address in all DHCP packets recei…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.3`
hpicfDhcpSnoopDatabaseFile A location to store the lease database, or to retrieve it after a reboot. The location must be given in the form of a Uniform Resource Locator (URL) as defined in RFC 2396. The …	scalar	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.4`
hpicfDhcpSnoopDatabaseWriteDelay The number of seconds to delay writing the DHCP lease database file after a database change. This potentially allows grouping multiple database changes into a single write. The …	scalar	Unsigned32	`.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.5`
hpicfDhcpSnoopDatabaseWriteTimeout The number of seconds to wait for the database file transfer to finish before giving up and declaring a failure. A value of 0 means continue retrying indefinitely. The default i…	scalar	Unsigned32	`.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.6`
hpicfDhcpSnoopOpt82Insert When this object is set to true, DHCP snooping will add a DHCP relay information option to DHCP client packets that it forwards on trusted ports, and will examine and strip DHCP r…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.7`
hpicfDhcpSnoopOpt82Policy This object configures the behavior of DHCP snooping when forwarding a DHCP packet from an untrusted port that already has a DHCP relay information option present. The policies s…	scalar	Enumeration	`.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.8`