hpicfDhcpSnoopOpt82Policy

HP-ICF-DHCP-SNOOP-MIB · .1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.8
MIB view Table view

Object

scalar r/w Enumeration 
This object configures the behavior of DHCP
snooping when forwarding a DHCP packet from
an untrusted port that already has a DHCP
relay information option present.  The
policies supported are:
  keep    - forward the packet without
            updating the existing option
  replace - replace the existing option
            with one generated by this switch
  drop    - drop the packet
This policy is only applied if DHCP snooping is
enabled and hpicfDhcpSnoopOpt82Insert is true.
In all cases where this policy is applied, if
there is no relay information option present in
the received packet, DHCP snooping will add one.
The default policy is drop.

Context

MIB
HP-ICF-DHCP-SNOOP-MIB
OID
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.8
Type
scalar
Access
readwrite
Status
current
Parent
hpicfDhcpSnoopGlobalCfg
Siblings
15

Syntax

Enumeration

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hpicfDhcpSnoopEnable
The administrative status of the DHCP Snooping feature.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.1
hpicfDhcpSnoopErrantReplyEnable
The operational status of hpicfDhcpSnoopErrantReply notifications. The default value is 1 (Enabled). A value of 2 represents Disabled. Writing this object requires authentic…
scalarEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.10
hpicfDhcpSnoopDatabaseFTPort
A location to store the port value of the FT Server. The default port value will be 69 for TFTP and 22 for SFTP.
scalarUnsigned32.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.11
hpicfDhcpSnoopDatabaseSFTPUsername
A location to store the Username of the SFTP Server. The default value of username is root.
scalarSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.12
hpicfDhcpSnoopDatabaseSFTPPassword
A location to store the Password of the SFTP Server
scalarSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.13
hpicfDhcpSnoopDatabaseValidateSFTPServer
This object sets the validate-sftp-server flag. When enabled, the user must login to the SFTP server to verify and accept the public key of the server. When disabled, the public…
scalarEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.14
hpicfDhcpSnoopAllowOverwriteBinding
When set to true, allows DHCP Snooping binding to be overwritten for the same IP address. When a DHCP server offers a host an IP address and if this address is already bound to an…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.15
hpicfDhcpSnoopRateLimit
This object sets the DHCP packet transfer rate. This rate limit is applicable only when DHCP snooping is enabled. The default rate is 100 packets per sec.
scalarInteger32.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.16
hpicfDhcpSnoopVlanEnable
The administrative status for DHCP Snooping on each VLAN. There will be one bit in this string for each possible VLAN ID. Each octet within this value specifies a set of eight V…
scalarOctetString.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.2
hpicfDhcpSnoopVerifyMac
When this variable is set to 'true', DHCP Snooping will verify that the MAC address in the chaddr field of the DHCP header matches the source MAC address in all DHCP packets recei…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.3
hpicfDhcpSnoopDatabaseFile
A location to store the lease database, or to retrieve it after a reboot. The location must be given in the form of a Uniform Resource Locator (URL) as defined in RFC 2396. The …
scalarSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.4
hpicfDhcpSnoopDatabaseWriteDelay
The number of seconds to delay writing the DHCP lease database file after a database change. This potentially allows grouping multiple database changes into a single write. The …
scalarUnsigned32.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.5
hpicfDhcpSnoopDatabaseWriteTimeout
The number of seconds to wait for the database file transfer to finish before giving up and declaring a failure. A value of 0 means continue retrying indefinitely. The default i…
scalarUnsigned32.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.6
hpicfDhcpSnoopOpt82Insert
When this object is set to true, DHCP snooping will add a DHCP relay information option to DHCP client packets that it forwards on trusted ports, and will examine and strip DHCP r…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.7
hpicfDhcpSnoopOpt82RemoteId
This object configures the value that will be used for the remote ID sub-option of the relay information that will be inserted by DHCP snooping. The possible values are: mac …
scalarEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.9