hpicfDhcpSnoopDatabaseFile

HP-ICF-DHCP-SNOOP-MIB · .1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.4
MIB view Table view

Object

scalar r/w SNMP-FRAMEWORK-MIBSnmpAdminString 
A location to store the lease database, or
to retrieve it after a reboot.  The location
must be given in the form of a Uniform
Resource Locator (URL) as defined in RFC
2396.  The allowed character sets and the
encoding rules defined in RFC 2396 section 2
apply.

Context

MIB
HP-ICF-DHCP-SNOOP-MIB
OID
.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.4
Type
scalar
Access
readwrite
Status
current
Parent
hpicfDhcpSnoopGlobalCfg
Siblings
15

Syntax

SNMP-FRAMEWORK-MIBSnmpAdminString
Source
SNMP-FRAMEWORK-MIBSnmpAdminString
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hpicfDhcpSnoopEnable
The administrative status of the DHCP Snooping feature.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.1
hpicfDhcpSnoopErrantReplyEnable
The operational status of hpicfDhcpSnoopErrantReply notifications. The default value is 1 (Enabled). A value of 2 represents Disabled. Writing this object requires authentic…
scalarEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.10
hpicfDhcpSnoopDatabaseFTPort
A location to store the port value of the FT Server. The default port value will be 69 for TFTP and 22 for SFTP.
scalarUnsigned32.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.11
hpicfDhcpSnoopDatabaseSFTPUsername
A location to store the Username of the SFTP Server. The default value of username is root.
scalarSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.12
hpicfDhcpSnoopDatabaseSFTPPassword
A location to store the Password of the SFTP Server
scalarSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.13
hpicfDhcpSnoopDatabaseValidateSFTPServer
This object sets the validate-sftp-server flag. When enabled, the user must login to the SFTP server to verify and accept the public key of the server. When disabled, the public…
scalarEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.14
hpicfDhcpSnoopAllowOverwriteBinding
When set to true, allows DHCP Snooping binding to be overwritten for the same IP address. When a DHCP server offers a host an IP address and if this address is already bound to an…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.15
hpicfDhcpSnoopRateLimit
This object sets the DHCP packet transfer rate. This rate limit is applicable only when DHCP snooping is enabled. The default rate is 100 packets per sec.
scalarInteger32.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.16
hpicfDhcpSnoopVlanEnable
The administrative status for DHCP Snooping on each VLAN. There will be one bit in this string for each possible VLAN ID. Each octet within this value specifies a set of eight V…
scalarOctetString.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.2
hpicfDhcpSnoopVerifyMac
When this variable is set to 'true', DHCP Snooping will verify that the MAC address in the chaddr field of the DHCP header matches the source MAC address in all DHCP packets recei…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.3
hpicfDhcpSnoopDatabaseWriteDelay
The number of seconds to delay writing the DHCP lease database file after a database change. This potentially allows grouping multiple database changes into a single write. The …
scalarUnsigned32.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.5
hpicfDhcpSnoopDatabaseWriteTimeout
The number of seconds to wait for the database file transfer to finish before giving up and declaring a failure. A value of 0 means continue retrying indefinitely. The default i…
scalarUnsigned32.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.6
hpicfDhcpSnoopOpt82Insert
When this object is set to true, DHCP snooping will add a DHCP relay information option to DHCP client packets that it forwards on trusted ports, and will examine and strip DHCP r…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.7
hpicfDhcpSnoopOpt82Policy
This object configures the behavior of DHCP snooping when forwarding a DHCP packet from an untrusted port that already has a DHCP relay information option present. The policies s…
scalarEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.8
hpicfDhcpSnoopOpt82RemoteId
This object configures the value that will be used for the remote ID sub-option of the relay information that will be inserted by DHCP snooping. The possible values are: mac …
scalarEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.34.1.1.1.9