hm2EtherNetIPVlan

HM2-INDUSTRIAL-PROTOCOLS-MIB · .1.3.6.1.4.1.248.11.101.1.3.1.9
MIB view Table view

Object

scalar r/w Integer32 
Set the VLAN ID of EtherNet/IP. Possible values for the VLAN ID are -1 to 4042.
A value of -1 corresponds to management VLAN(the default). A value 0 is for priority tagging.
System supported values for VLAN ID are 1 to 4042. VLAN ID '1' is for untagged
EtherNet/IP traffic. Incoming Ethernet/IP traffic with other than configured VLAN 
is discarded. Outgoing Ethernet/IP traffic is tagged with configured VLAN ID.

Context

MIB
HM2-INDUSTRIAL-PROTOCOLS-MIB
OID
.1.3.6.1.4.1.248.11.101.1.3.1.9
Type
scalar
Access
readwrite
Status
current
Parent
hm2EthernetIPConfigGroup
Siblings
9

Syntax

Integer32

Values & Constraints

Object Constraints
range: -1-4042

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hm2EtherNetIPAdminStatus
Enables/disables the EtherNet/IP(TM) operation on this device. If disabled, the EtherNet/IP protocol is deactivated, but the EtherNet/IP MIBs can be accessed. The default value…
scalarHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.101.1.3.1.1
hm2EtherNetIPInterface
Sets the mode of the various interface for EtherNet/IP for this device. EtherNet/IP traffic configure with physical interface EtherNet/IP traffic configure with VLAN interface Eth…
scalarInteger32.1.3.6.1.4.1.248.11.101.1.3.1.10
hm2EtherNetIPErrorCode
Read the error code within EtherNet/IP(TM) action.
scalarInteger32.1.3.6.1.4.1.248.11.101.1.3.1.2
hm2EtherNetIPProductCode
Read the Product Code as shown in the Identity Object of EtherNet/IP(TM). Values 1 .. 65635 are valid product codes.
scalarInteger32.1.3.6.1.4.1.248.11.101.1.3.1.3
hm2EtherNetIPMajorRevision
Read the major revision number as shown in the Identity Object of EtherNet/IP(TM). Values 1 .. 255 are valid revisions.
scalarInteger32.1.3.6.1.4.1.248.11.101.1.3.1.4
hm2EtherNetIPMinorRevision
Read the minor revision number as shown in the Identity Object of EtherNet/IP(TM). Values 1 .. 255 are valid revisions.
scalarInteger32.1.3.6.1.4.1.248.11.101.1.3.1.5
hm2EtherNetIPProductName
Read the product name as shown in the Identity Object of EtherNet/IP(TM). The size is restricted to 32 Characters.
scalarOctetString.1.3.6.1.4.1.248.11.101.1.3.1.6
hm2EtherNetIPCatalogName
Read the catolog name as provided in the EDS file for EtherNet/IP(TM). The size is restricted to 255 Characters.
scalarOctetString.1.3.6.1.4.1.248.11.101.1.3.1.7
hm2EtherNetIPWriteAccessStatus
Enables/disables the read/write capability of the EtherNet/IP protocol. If disabled(2), the EtherNet/IP protocol is accessible the get requests only, if enabled(1), the EtherNe…
scalarHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.101.1.3.1.8