hm2EtherNetIPAdminStatus

HM2-INDUSTRIAL-PROTOCOLS-MIB · .1.3.6.1.4.1.248.11.101.1.3.1.1

MIB view Table view

Object

scalar r/w HM2-TC-MIBHmEnabledStatus

Enables/disables the EtherNet/IP(TM) operation on this device.
If disabled, the EtherNet/IP protocol is deactivated, but the EtherNet/IP MIBs can be accessed.
The default value is disabled.

Context

MIB: HM2-INDUSTRIAL-PROTOCOLS-MIB
OID: .1.3.6.1.4.1.248.11.101.1.3.1.1
Type: scalar
Access: readwrite
Status: current
Parent: hm2EthernetIPConfigGroup
Siblings: 9

Syntax

HM2-TC-MIBHmEnabledStatus

Source: HM2-TC-MIBHmEnabledStatus
Base type: Enumeration

Values & Constraints

Type Values

`1`	enable
`2`	disable

Related Objects

Sibling Objects

Object	Type	Syntax	OID
hm2EtherNetIPInterface Sets the mode of the various interface for EtherNet/IP for this device. EtherNet/IP traffic configure with physical interface EtherNet/IP traffic configure with VLAN interface Eth…	scalar	Integer32	`.1.3.6.1.4.1.248.11.101.1.3.1.10`
hm2EtherNetIPErrorCode Read the error code within EtherNet/IP(TM) action.	scalar	Integer32	`.1.3.6.1.4.1.248.11.101.1.3.1.2`
hm2EtherNetIPProductCode Read the Product Code as shown in the Identity Object of EtherNet/IP(TM). Values 1 .. 65635 are valid product codes.	scalar	Integer32	`.1.3.6.1.4.1.248.11.101.1.3.1.3`
hm2EtherNetIPMajorRevision Read the major revision number as shown in the Identity Object of EtherNet/IP(TM). Values 1 .. 255 are valid revisions.	scalar	Integer32	`.1.3.6.1.4.1.248.11.101.1.3.1.4`
hm2EtherNetIPMinorRevision Read the minor revision number as shown in the Identity Object of EtherNet/IP(TM). Values 1 .. 255 are valid revisions.	scalar	Integer32	`.1.3.6.1.4.1.248.11.101.1.3.1.5`
hm2EtherNetIPProductName Read the product name as shown in the Identity Object of EtherNet/IP(TM). The size is restricted to 32 Characters.	scalar	OctetString	`.1.3.6.1.4.1.248.11.101.1.3.1.6`
hm2EtherNetIPCatalogName Read the catolog name as provided in the EDS file for EtherNet/IP(TM). The size is restricted to 255 Characters.	scalar	OctetString	`.1.3.6.1.4.1.248.11.101.1.3.1.7`
hm2EtherNetIPWriteAccessStatus Enables/disables the read/write capability of the EtherNet/IP protocol. If disabled(2), the EtherNet/IP protocol is accessible the get requests only, if enabled(1), the EtherNe…	scalar	HM2-TC-MIBHmEnabledStatus	`.1.3.6.1.4.1.248.11.101.1.3.1.8`
hm2EtherNetIPVlan Set the VLAN ID of EtherNet/IP. Possible values for the VLAN ID are -1 to 4042. A value of -1 corresponds to management VLAN(the default). A value 0 is for priority tagging. Syste…	scalar	Integer32	`.1.3.6.1.4.1.248.11.101.1.3.1.9`