hh3cReplicaStatSwitch

HH3C-STORAGE-SNAP-MIB · .1.3.6.1.4.1.25506.10.2.1.10.1.24
MIB view Table view

Object

column r/w Enumeration 
This object identifies the action how to operate the replica.
When read , a value of 'none' will be get.
The value of 'promte' means remove the replication relation and promote 
the remote copy on the target server.
The value of 'sync' means synchronize mannually (force a replication that 
is not scheduled.)        
The value of 'scan' means scan the delta data between primary resource and 
replica resource.
The value of 'reversal' means switch the roles of the primary resource and 
replica resource. The replication configuration is maintained. The primary 
and replica must be synchronized in order to reverse a replica. 
The value of 'stop' means stop a replication that is currently in progress.
The value of 'suspend' means suspend future replications from automatically 
being triggered by replication policies (watermark, interval, time). This will 
not stop a replication that is currently in progress.
The value of 'resume' means resume the replication status from suspended to 
normal.
Note that if the action of 'upgrade' is executed successfully, this replica
resource will become a normal logic volume, and this entry will be deleted
automatically.
Note that if the action of 'reversal' is executed successfully, Clients will 
be disconnected from the former primary resource.

Context

MIB
HH3C-STORAGE-SNAP-MIB
OID
.1.3.6.1.4.1.25506.10.2.1.10.1.24
Type
column
Access
readwrite
Status
current
Parent
hh3cReplicaConfigEntry
Table
hh3cReplicaConfigTable
Siblings
24

Syntax

Enumeration

Values & Constraints

Enumerated Values
1promte
2sync
3scan
4reversal
5stop
6suspend
7resume
8none

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hh3cRepLocalLvIndex
This object identifies the local logic volume that is related with replication. The object identified by this index is the same object as identified by the same value of hh3cSna…
columnHH3C-STORAGE-REF-MIBHh3cLvIDType.1.3.6.1.4.1.25506.10.2.1.10.1.1
hh3cRepRemoteServerName
This object identifies the name of remote server.
columnOctetString.1.3.6.1.4.1.25506.10.2.1.10.1.10
hh3cRepRemoteServerUsername
This object identifies the username of remote server.
columnOctetString.1.3.6.1.4.1.25506.10.2.1.10.1.11
hh3cRepRemoteServerPassword
This object identifies the password of remote server.
columnOctetString.1.3.6.1.4.1.25506.10.2.1.10.1.12
hh3cRepRemoteLvIndex
This object identifies the logic volume of remote server.
columnHH3C-STORAGE-REF-MIBHh3cLvIDType.1.3.6.1.4.1.25506.10.2.1.10.1.13
hh3cReplicaMode
This object identifies the replication mode: The value of 'adaptive' means that data from the primary resource is continuously replicated to a replica resource unless the system …
columnEnumeration.1.3.6.1.4.1.25506.10.2.1.10.1.14
hh3cReplicaWatermark
This object identifies the size of watermark which means a replication is scheduled.
columnMB SNMPv2-SMIInteger32.1.3.6.1.4.1.25506.10.2.1.10.1.15
hh3cReplicaWatermarkRetry
If the 'hh3cReplicaWatermark' is set, This object identifies the interval time to retry if the last replication is failed. The units is minute.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.25506.10.2.1.10.1.16
hh3cReplicaInitializeTime
This object identifies the time to start an initial replication.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.25506.10.2.1.10.1.17
hh3cReplicaInterval
This object identifies how often the replication should be repeated after initial replication. The units is minute.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.25506.10.2.1.10.1.18
hh3cReplicaEncrypt
This object identifies the encrypt option is enable or diable.
columnHH3C-STORAGE-REF-MIBHh3cStorageEnableState.1.3.6.1.4.1.25506.10.2.1.10.1.19
hh3cLvRepLocalWay
The value of 'outgoing' means the hh3cRepLocalLvIndex is the primary logic volume of replication, and the hh3cRepRemoteLvIndex is the replica logic volume. The value of 'incoming…
columnEnumeration.1.3.6.1.4.1.25506.10.2.1.10.1.2
hh3cReplicaCompress
This object identifies the compress option is enable or diable.
columnHH3C-STORAGE-REF-MIBHh3cStorageEnableState.1.3.6.1.4.1.25506.10.2.1.10.1.20
hh3cReplicaUseExistTM
This object identifies if using the exist TimeMark to replicate or not.
columnHH3C-STORAGE-REF-MIBHh3cStorageEnableState.1.3.6.1.4.1.25506.10.2.1.10.1.21
hh3cReplicaProtocol
This object identifies the protocol about replication. The value 'tcp' means Transmission Control Protocol, and 'rudp' means Reliable User Datagram Protocol.
columnEnumeration.1.3.6.1.4.1.25506.10.2.1.10.1.22
hh3cReplicaScanDiff
This object identifies the system to scan both the primary and replica resource to determine how much data needs to be synchronized.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.10.2.1.10.1.23
hh3cReplicaRowStatus
This object identifies the action to enable or disable the replication.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.25506.10.2.1.10.1.25
hh3cRepLocalServerIP
This object identifies the ip address of local server.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.25506.10.2.1.10.1.3
hh3cRepLocalServerIPType
This object identifies the ip address type of local server.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.25506.10.2.1.10.1.4
hh3cRepLocalServerName
This object identifies the name of local server.
columnOctetString.1.3.6.1.4.1.25506.10.2.1.10.1.5
hh3cRepLocalServerUsername
This object identifies the username of local server.
columnOctetString.1.3.6.1.4.1.25506.10.2.1.10.1.6
hh3cRepLocalServerPassword
This object identifies the password of local server.
columnOctetString.1.3.6.1.4.1.25506.10.2.1.10.1.7
hh3cRepRemoteServerIP
This object identifies the ip address of remote server.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.25506.10.2.1.10.1.8
hh3cRepRemoteServerIPType
This object identifies the ip address type of remote server.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.25506.10.2.1.10.1.9