hh3cdlswNodeStdPacingSupport
HH3C-SNA-DLSW-MIB ·
.1.3.6.1.4.1.25506.8.37.1.4
Object
scalar
Enumeration
Circuit pacing, as defined in the DLSw Standard, allows each of the two DLSw nodes on a circuit to control the amount of data the other is permitted to send to them. This object reflects the level of support the DLSw node has for this protocol. (1) means the node has no support for the standard circuit pacing flows; it may use RFC 1434+ methods only, or a proprietary flow control scheme. (2) means the node supports the standard scheme and can vary the window sizes it grants as a data receiver. (3) means the node supports the standard scheme but never varies its receive window size.
Context
- MIB
- HH3C-SNA-DLSW-MIB
- OID
.1.3.6.1.4.1.25506.8.37.1.4- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- hh3cdlswNode
- Siblings
- 16
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | none |
2 | adaptiveRcvWindow |
3 | fixedRcvWindow |
65535 | unknown |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hh3cdlswNodeVersion This value identifies the particular version of the DLSw
standard supported by this DLSw. The first octet is a
hexadecimal value representing the DLSw standard Version
number of … | scalar | OctetString | .1.3.6.1.4.1.25506.8.37.1.1 |
| hh3cdlswNodeKeepAlive The vlaue of keepalive interval. 65535 expresses the value is unknown | scalar | Integer32 | .1.3.6.1.4.1.25506.8.37.1.10 |
| hh3cdlswNodeMaxWindow The value of max-window. 65535 expresses the value is unknown | scalar | Integer32 | .1.3.6.1.4.1.25506.8.37.1.11 |
| hh3cdlswNodePermitDynamic To accept connections from non-configured remote peers when
permit-dynamic is setted. | scalar | Enumeration | .1.3.6.1.4.1.25506.8.37.1.12 |
| hh3cdlswNodeConnTimeout Define connected state timer(The unit is a thousandth of a
second). | scalar | Integer32 | .1.3.6.1.4.1.25506.8.37.1.13 |
| hh3cdlswNodeLocalPendTimeout Define connected state timer(The unit is a thousandth of a
second). | scalar | Integer32 | .1.3.6.1.4.1.25506.8.37.1.14 |
| hh3cdlswNodeRemotePendTimeout Define connected state timer(The unit is a thousandth of a
second). | scalar | Integer32 | .1.3.6.1.4.1.25506.8.37.1.15 |
| hh3cdlswNodeSnaCacheTimeout Define connected state timer(The unit is a thousandth of a
second). | scalar | Integer32 | .1.3.6.1.4.1.25506.8.37.1.16 |
| hh3cdlswNodeVendorID The value identifies the manufacturer's IEEE-assigned
organizationally Unique Identifier (OUI) of this DLSw.
This information is reported in DLSw Capabilities
Exchange. | scalar | OctetString | .1.3.6.1.4.1.25506.8.37.1.2 |
| hh3cdlswTrapControl | node | - | .1.3.6.1.4.1.25506.8.37.1.20 |
| hh3cdlswNodeVersionString This string gives product-specific information about
this DLSw (e.g., product name, code release and fix level).
This flows in Capabilities Exchange messages. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.25506.8.37.1.3 |
| hh3cdlswNodeStatus The status of the DLSw part of the system. | scalar | Enumeration | .1.3.6.1.4.1.25506.8.37.1.5 |
| hh3cdlswNodeVirtualSegmentLFSize The largest frame size (including DLC header and info field
but not any MAC-level or framing octets) this DLSw can forward
on any path through itself. This object can represent a… | scalar | LFSize | .1.3.6.1.4.1.25506.8.37.1.6 |
| hh3cdlswNodeLocalAddr Local peer ip address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.25506.8.37.1.7 |
| hh3cdlswNodePriority The priority value of local peer. 65535 expresses the value is unknown | scalar | Integer32 | .1.3.6.1.4.1.25506.8.37.1.8 |
| hh3cdlswNodeInitWindow The vlaue of init-window. 65535 expresses the value is unknown | scalar | Integer32 | .1.3.6.1.4.1.25506.8.37.1.9 |