hh3cdlswCircuitState
HH3C-SNA-DLSW-MIB ·
.1.3.6.1.4.1.25506.8.37.5.1.1.14
Object
column
Enumeration
The current state of this circuit. The agent, implementation
specific, may choose to keep entries for some period of time
after circuit disconnect, so the manager can gather the time
and cause of disconnection.
While all of the specified values may be returned from a GET
operation, the only SETable value is `disconnectPending'.
When this value is set, DLSw should perform the appropriate
action given its previous state (e.g., send HALT_DL if the
state was `connected') to bring the circuit down to the
`disconnected' state. Both the partner DLSw and local end
station(s) should be notified as appropriate.
This MIB provides no facility to re-establish a disconnected
circuit, because in DLSw this should be an end station-driven
function.
Context
- MIB
- HH3C-SNA-DLSW-MIB
- OID
.1.3.6.1.4.1.25506.8.37.5.1.1.14- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hh3cdlswCircuitEntry
- Table
- hh3cdlswCircuitTable
- Siblings
- 17
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | disconnected |
2 | circuitStart |
3 | resolvePending |
4 | circuitPending |
5 | circuitEstablished |
6 | connectPending |
7 | contactPending |
8 | connected |
9 | disconnectPending |
10 | haltPending |
11 | haltPendingNoack |
12 | circuitRestart |
13 | restartPending |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hh3cdlswCircuitS1CircuitId The Circuit ID assigned by this DLSw node to this circuit.
The first four octets are the DLC port Id, and
the second four octets are the Data Link Correlator.
If the DLSw SSP was … | column | Integer32 | .1.3.6.1.4.1.25506.8.37.5.1.1.1 |
| hh3cdlswCircuitS2CircuitId The Circuit ID assigned to this circuit by the partner
DLSw node. The first four octets are the DLC port Id, and
the second four octets are the Data Link Correlator.
If the DLSw … | column | Integer32 | .1.3.6.1.4.1.25506.8.37.5.1.1.10 |
| hh3cdlswCircuitOrigin This object specifies which of the two end stations
initiated the establishment of this circuit. | column | Enumeration | .1.3.6.1.4.1.25506.8.37.5.1.1.11 |
| hh3cdlswCircuitEntryTime The amount of time (in hundredths of a second) since this
circuit table conceptual row was created. | column | hundredths of a second SNMPv2-SMITimeTicks | .1.3.6.1.4.1.25506.8.37.5.1.1.12 |
| hh3cdlswCircuitStateTime The amount of time (in hundredths of a second) since this
circuit entered the current state. | column | hundredths of a second SNMPv2-SMITimeTicks | .1.3.6.1.4.1.25506.8.37.5.1.1.13 |
| hh3cdlswCircuitFCSendGrantedUnits The number of paced SSP messages that this DLSw is currently
authorized to send on this circuit before it must stop and
wait for an additional flow control indication from the
par… | column | Integer32 | .1.3.6.1.4.1.25506.8.37.5.1.1.15 |
| hh3cdlswCircuitFCSendCurrentWndw The current window size that this DLSw is using in its role
as a data sender. This is the value by which this DLSw would
increase the number of messages it is authorized to send,… | column | Integer32 | .1.3.6.1.4.1.25506.8.37.5.1.1.16 |
| hh3cdlswCircuitFCRecvGrantedUnits The current number of paced SSP messages that this DLSw has
authorized the partner DLSw to send on this circuit before
the partner DLSw must stop and wait for an additional flow
c… | column | Integer32 | .1.3.6.1.4.1.25506.8.37.5.1.1.17 |
| hh3cdlswCircuitFCRecvCurrentWndw The current window size that this DLSw is using in its role
as a data receiver. This is the number of additional paced
SSP messages that this DLSw would be authorizing its DLSw
p… | column | Integer32 | .1.3.6.1.4.1.25506.8.37.5.1.1.18 |
| hh3cdlswCircuitS1Mac The MAC Address of End Station 1 (S1) used for this circuit. | column | MacAddressNC | .1.3.6.1.4.1.25506.8.37.5.1.1.2 |
| hh3cdlswCircuitS1Sap The SAP at End Station 1 (S1) used for this circuit. | column | OctetString | .1.3.6.1.4.1.25506.8.37.5.1.1.3 |
| hh3cdlswCircuitS2Mac The MAC Address of End Station 2 (S2) used for this circuit. | column | MacAddressNC | .1.3.6.1.4.1.25506.8.37.5.1.1.4 |
| hh3cdlswCircuitS2Sap The SAP at End Station 2 (S2) used for this circuit. | column | OctetString | .1.3.6.1.4.1.25506.8.37.5.1.1.5 |
| hh3cdlswCircuitS1IfIndex The ifEntry index of the local interface through which S1
can be reached. | column | Integer32 | .1.3.6.1.4.1.25506.8.37.5.1.1.6 |
| hh3cdlswCircuitS1Ifname The name of the interface whose Ifdex is hh3cdlswCircuitS1IfIndex. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.25506.8.37.5.1.1.7 |
| hh3cdlswCircuitS1DlcType The DLC protocol in use between the DLSw node and S1. | column | DlcType | .1.3.6.1.4.1.25506.8.37.5.1.1.8 |
| hh3cdlswCircuitS2TAddress If the location of End Station 2 is remote,
this object contains the address of the partner
DLSw, else it will be an OCTET STRING of zero length. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.25506.8.37.5.1.1.9 |