hh3cQoSTrafLmtExceedCos

HH3C-QOS-PROFILE-MIB · .1.3.6.1.4.1.25506.2.17.1.2.1.1.21
MIB view Table view

Object

column r/w Integer32 
The remarked COS value of non-conformed flow.
COS 255 is used as default value and for get/get-next operation of this
node. If the user does not set exceeding action as remarking COS, then value 255
is returned for get/get-next operation.

Context

MIB
HH3C-QOS-PROFILE-MIB
OID
.1.3.6.1.4.1.25506.2.17.1.2.1.1.21
Type
column
Access
readwrite
Status
current
Parent
hh3cQoSTrafficLimitEntry
Table
hh3cQoSTrafficLimitTable
Siblings
23

Syntax

Integer32

Values & Constraints

Object Constraints
range: 0-7 range: 255-255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hh3cQoSTrafLmtProfIndex
The index of QoS profile which the traffic-limit action belongs to.
columnInteger32.1.3.6.1.4.1.25506.2.17.1.2.1.1.1
hh3cQoSTrafLmtTargetRateMbps
Target rate:Mbps Some products only support Mbps,but others support Kbps,so Kbps and Mbps should be supportted mutually exclusively on the same product.
columnInteger32.1.3.6.1.4.1.25506.2.17.1.2.1.1.10
hh3cQoSTrafLmtTargetRateKbps
Target rate:Kbps. Some products only support Kbps,but others support Mbps,so Kbps and Mbps should be supportted mutually exclusively on the same product.
columnInteger32.1.3.6.1.4.1.25506.2.17.1.2.1.1.11
hh3cQoSTrafLmtPeakRate
Peak rate
columnInteger32.1.3.6.1.4.1.25506.2.17.1.2.1.1.12
hh3cQoSTrafLmtCIR
Committed Information Rate. unit:kbps.
columnInteger32.1.3.6.1.4.1.25506.2.17.1.2.1.1.13
hh3cQoSTrafLmtCBS
Committed Burst Size. unit:byte.
columnInteger32.1.3.6.1.4.1.25506.2.17.1.2.1.1.14
hh3cQoSTrafLmtEBS
Excess Burst Size. unit:byte.
columnInteger32.1.3.6.1.4.1.25506.2.17.1.2.1.1.15
hh3cQoSTrafLmtPIR
Peak Information Rate. unit:kbps.
columnInteger32.1.3.6.1.4.1.25506.2.17.1.2.1.1.16
hh3cQoSTrafLmtConformLocalPre
The local precedence of conformed flow.
columnInteger32.1.3.6.1.4.1.25506.2.17.1.2.1.1.17
hh3cQoSTrafLmtConformActionType
The action type of conformed flow.
columnEnumeration.1.3.6.1.4.1.25506.2.17.1.2.1.1.18
hh3cQoSTrafLmtExceedActionType
The action type of non-conformed flow.
columnEnumeration.1.3.6.1.4.1.25506.2.17.1.2.1.1.19
hh3cQoSTrafLmtActionIndex
The index of traffic-limit action.
columnInteger32.1.3.6.1.4.1.25506.2.17.1.2.1.1.2
hh3cQoSTrafLmtExceedDscp
The remarked DSCP value of non-conformed flow. DSCP 255 is used as default value and for get/get-next operation of this node. If the user does not set exceeding action as remarkin…
columnInteger32.1.3.6.1.4.1.25506.2.17.1.2.1.1.20
hh3cQoSTrafLmtRowStatus
RowStatus,Now support three state:CreateAndGo,Active,Destroy.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.25506.2.17.1.2.1.1.22
hh3cQoSTrafLmtConformCos
If the user chooses remark-cos value of the hh3cQoSTrafLmtConformActionType, this object can be used to set the conform cos value. There are some enumerations as follows: best-eff…
columnInteger32.1.3.6.1.4.1.25506.2.17.1.2.1.1.23
hh3cQoSTrafLmtConformDscp
If the user chooses remark-dscp value of the hh3cQoSTrafLmtConformActionType, this object can be used to set the conform dscp value. There are some enumerations as follows: <0-63>…
columnInteger32.1.3.6.1.4.1.25506.2.17.1.2.1.1.24
hh3cQoSTrafLmtDirection
The direction of traffic-limit action.
columnHh3cQoSDirection.1.3.6.1.4.1.25506.2.17.1.2.1.1.3
hh3cQoSTrafLmtUserAclNum
The number of user-based acl group.
columnInteger32.1.3.6.1.4.1.25506.2.17.1.2.1.1.4
hh3cQoSTrafLmtUserAclRule
The subitem of user-based acl rule.
columnInteger32.1.3.6.1.4.1.25506.2.17.1.2.1.1.5
hh3cQoSTrafLmtIpAclNum
The number of Ip-based acl group.
columnInteger32.1.3.6.1.4.1.25506.2.17.1.2.1.1.6
hh3cQoSTrafLmtIpAclRule
The subitem of IP-based acl rule.
columnInteger32.1.3.6.1.4.1.25506.2.17.1.2.1.1.7
hh3cQoSTrafLmtLinkAclNum
The number of Link-based acl group
columnInteger32.1.3.6.1.4.1.25506.2.17.1.2.1.1.8
hh3cQoSTrafLmtLinkAclRule
The subitem of Link-based acl rule.
columnInteger32.1.3.6.1.4.1.25506.2.17.1.2.1.1.9