hh3cifEthernetIsolate

HH3C-LswINF-MIB · .1.3.6.1.4.1.25506.8.35.5.1.4.1.13
MIB view Table view

Object

column r/w OctetString 
Isolate group means that all ports in the same isolate group can not
send and receive packets each other.
Each octet within this value specifies a set of eight isolate groups,
with the first octet specifying isolate groups 1 through 8,  the second
octet specifying isolate groups 9 through 16, etc. Within each octet,
the leftmost bit is the first bit.
the first bit represents the lowest numbered isolate group, and the
last bit represents the highest numbered isolate group. one port can
belong to more than one isolate group.
Thus, each isolate group is represented by a single bit within the
value of this object.
If that bit has a value of '1', then that isolate group includes this port;
the port is not included if its bit has a value of '0'.
for example, the first octet is '10000100' means that the port is
included in the isolate group 1 and isolate group 6.

Context

MIB
HH3C-LswINF-MIB
OID
.1.3.6.1.4.1.25506.8.35.5.1.4.1.13
Type
column
Access
readwrite
Status
current
Parent
hh3cethernetEntry
Table
hh3cethernetTable
Siblings
16

Syntax

OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hh3cifEthernetTest
Test this interface. The actual testing will be different according to products. Read operation not supported.
columnEnumeration.1.3.6.1.4.1.25506.8.35.5.1.4.1.10
hh3cifMacAddrLearnMode
Status indicates mac address learn mode of the interface. IVL(1) means independent VLAN learning. SVL means shared VLAN learning.
columnEnumeration.1.3.6.1.4.1.25506.8.35.5.1.4.1.11
hh3cifEthernetFlowInterval
Set flow interval of the ethernet. The NMS should set value to integer which is a multiple of 5.
columnInteger32.1.3.6.1.4.1.25506.8.35.5.1.4.1.12
hh3cifVlanVPNStatus
Vlan VPN enable status.
columnEnumeration.1.3.6.1.4.1.25506.8.35.5.1.4.1.14
hh3cifVlanVPNUplinkStatus
Vlan VPN uplink status.
columnEnumeration.1.3.6.1.4.1.25506.8.35.5.1.4.1.15
hh3cifVlanVPNTPID
Port based Vlan VPN TPID(Tag Protocol Indentifier), default value is 0x8100. Please refer to hh3cVlanVPNTPIDMode to get more information.
columnInteger32.1.3.6.1.4.1.25506.8.35.5.1.4.1.16
hh3cifIsolateGroupID
Isolate group identifier. Value zero means this interface does not belong to any isolate group.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.25506.8.35.5.1.4.1.17
hh3cifisUplinkPort
Ethernet uplink status, default value is 2.
columnEnumeration.1.3.6.1.4.1.25506.8.35.5.1.4.1.18
hh3cifEthernetAutoSpeedMask
This object specifies which kinds of speed mode can be negotiated. Each bit corresponds to a kind of speed mode. If the value of a bit is '1', it means the correspo…
columnSpeedModeFlag.1.3.6.1.4.1.25506.8.35.5.1.4.1.19
hh3cifEthernetAutoSpeed
This object indicates which kinds of speed mode are negotiable on this port. Only when a bit of hh3cifEthernetAutoSpeedMask is '1', the corresponding bit of this ob…
columnSpeedModeFlag.1.3.6.1.4.1.25506.8.35.5.1.4.1.20
hh3cifEthernetDuplex
Ethernet interface mode.
columnEnumeration.1.3.6.1.4.1.25506.8.35.5.1.4.1.3
hh3cifEthernetMTU
MTU on the Ethernet interface.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.25506.8.35.5.1.4.1.4
hh3cifEthernetSpeed
Ethernet interface speed.
columnEnumeration.1.3.6.1.4.1.25506.8.35.5.1.4.1.5
hh3cifEthernetMdi
Type of the line connected to the port. MDI-II (straight-through cable): 1 MDI-X (crossover cable): 2 MDI-AUTO (auto-sensing): 3
columnEnumeration.1.3.6.1.4.1.25506.8.35.5.1.4.1.7
hh3cMaxMacLearn
The maximum number of MAC addresses that the port can learn. The value -1 means that the number of Mac addresses that the port can learn is unlimited.
columnInteger32.1.3.6.1.4.1.25506.8.35.5.1.4.1.8
hh3cifMacAddressLearn
This object indicates if the interface is allowed to learn mac address. eanbled(1) means the interface can learn mac address, otherwise disabled(2) can be set.
columnEnumeration.1.3.6.1.4.1.25506.8.35.5.1.4.1.9