hh3cifEthernetAutoSpeed

HH3C-LswINF-MIB · .1.3.6.1.4.1.25506.8.35.5.1.4.1.20
MIB view Table view

Object

column r/w SpeedModeFlag 
This object indicates which kinds of speed mode are negotiable
on this port.
              
Only when a bit of hh3cifEthernetAutoSpeedMask is '1', the corresponding
bit of this object can be set to '1', indicating the corresponding
speed mode is negotiable.
              
For example, if the value of hh3cifEthernetAutoSpeedMask is 0xA0,
which indicates speed mode 's10M' and 's1000M' are negotiable,
the possible value of this object should be one of the four values
(0x00, 0x20, 0x80 and 0xA0).
              
If the value of hh3cifEthernetSpeed is not 'auto', the value of this
object is insignificant and should be ignored. The value length of
this object should be as long as that of hh3cifEthernetAutoSpeedMask.

Context

MIB
HH3C-LswINF-MIB
OID
.1.3.6.1.4.1.25506.8.35.5.1.4.1.20
Type
column
Access
readwrite
Status
current
Parent
hh3cethernetEntry
Table
hh3cethernetTable
Siblings
16

Syntax

SpeedModeFlag
Source
SpeedModeFlag
Base type
Bits

Values & Constraints

Type Values
0s10M
1s100M
2s1000M
3s10000M
4s24000M
5s40000M
6s100000M
7s2500M
8s5000M
9s20000M
10s25000M
11s50000M
12s200000M
13s400000M

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hh3cifEthernetTest
Test this interface. The actual testing will be different according to products. Read operation not supported.
columnEnumeration.1.3.6.1.4.1.25506.8.35.5.1.4.1.10
hh3cifMacAddrLearnMode
Status indicates mac address learn mode of the interface. IVL(1) means independent VLAN learning. SVL means shared VLAN learning.
columnEnumeration.1.3.6.1.4.1.25506.8.35.5.1.4.1.11
hh3cifEthernetFlowInterval
Set flow interval of the ethernet. The NMS should set value to integer which is a multiple of 5.
columnInteger32.1.3.6.1.4.1.25506.8.35.5.1.4.1.12
hh3cifEthernetIsolate
Isolate group means that all ports in the same isolate group can not send and receive packets each other. Each octet within this value specifies a set of eight isolate groups, wit…
columnOctetString.1.3.6.1.4.1.25506.8.35.5.1.4.1.13
hh3cifVlanVPNStatus
Vlan VPN enable status.
columnEnumeration.1.3.6.1.4.1.25506.8.35.5.1.4.1.14
hh3cifVlanVPNUplinkStatus
Vlan VPN uplink status.
columnEnumeration.1.3.6.1.4.1.25506.8.35.5.1.4.1.15
hh3cifVlanVPNTPID
Port based Vlan VPN TPID(Tag Protocol Indentifier), default value is 0x8100. Please refer to hh3cVlanVPNTPIDMode to get more information.
columnInteger32.1.3.6.1.4.1.25506.8.35.5.1.4.1.16
hh3cifIsolateGroupID
Isolate group identifier. Value zero means this interface does not belong to any isolate group.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.25506.8.35.5.1.4.1.17
hh3cifisUplinkPort
Ethernet uplink status, default value is 2.
columnEnumeration.1.3.6.1.4.1.25506.8.35.5.1.4.1.18
hh3cifEthernetAutoSpeedMask
This object specifies which kinds of speed mode can be negotiated. Each bit corresponds to a kind of speed mode. If the value of a bit is '1', it means the correspo…
columnSpeedModeFlag.1.3.6.1.4.1.25506.8.35.5.1.4.1.19
hh3cifEthernetDuplex
Ethernet interface mode.
columnEnumeration.1.3.6.1.4.1.25506.8.35.5.1.4.1.3
hh3cifEthernetMTU
MTU on the Ethernet interface.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.25506.8.35.5.1.4.1.4
hh3cifEthernetSpeed
Ethernet interface speed.
columnEnumeration.1.3.6.1.4.1.25506.8.35.5.1.4.1.5
hh3cifEthernetMdi
Type of the line connected to the port. MDI-II (straight-through cable): 1 MDI-X (crossover cable): 2 MDI-AUTO (auto-sensing): 3
columnEnumeration.1.3.6.1.4.1.25506.8.35.5.1.4.1.7
hh3cMaxMacLearn
The maximum number of MAC addresses that the port can learn. The value -1 means that the number of Mac addresses that the port can learn is unlimited.
columnInteger32.1.3.6.1.4.1.25506.8.35.5.1.4.1.8
hh3cifMacAddressLearn
This object indicates if the interface is allowed to learn mac address. eanbled(1) means the interface can learn mac address, otherwise disabled(2) can be set.
columnEnumeration.1.3.6.1.4.1.25506.8.35.5.1.4.1.9