hh3cCBQoSMatchRuleIntValue1

Value of Match Rule.
IPv4 ACL: 2000~3999
MAC ACL: 4000~4999
User ACL: 5000~5999
IPv6 ACL: 2000~3999; 10000~42767
Software QoS: 2000~3999
Hardware Qos: 10000~42767
RtpPort: start-port: 2000~65535
IpPrec: value: 0~7, up to 8 values can be input.  The bit set to
        1 of the last 8 bits of hh3cCBQoSMatchRuleIntValue1 is
        used to indicate the value 0~7.
  for example: 0x53(Binary format is 01010011)
               means the match rule is 'if-match ip-prec 0 1 4 6'
Dscp: value:0~63, up to 8 values can be input.
      The bit set to 1 of hh3cCBQoSMatchRuleIntValue1 is used
      to indicate the value 32~63.
      The bit set to 1 of hh3cCBQoSMatchRuleIntValue2 is used to
      indicate the value 0~31.
  for example: 0x80000003 means the match rule is 'if-match
               dscp 32 33 63'
Vlan8021p: value:0~7, up to 8 values can be input.  The bit set
           to 1 of the last 8 bits of hh3cCBQoSMatchRuleIntValue1
           is used to indicate the value 0~7.
  for example: 0x53(Binary format is 01010011) means the
               match rule is 'if-match customer-dot1p 0 1 4 6'
MplsExp: value:0~7, up to 8 values can be input.  The bit set to 1
         of the last 8 bits of hh3cCBQoSMatchRuleIntValue1 is used
         to indicate the 8 value 0~7.
  for example: 0x53(Binary format is 01010011) means the
               match rule is 'if-match mpls 0 1 4 6'
SourceIp: 1~4095
QosLocalID: 1~4095
AtmClp: 0~1
FrDe: 0~1
LocalPrecedence: 0~7, up to 8 values can be input.  The bit set to
                 1 of the last 8 bits of hh3cCBQoSMatchRuleIntValue1
                 is used to indicate the value 0~7.
  for example: 0x53(Binary format is 01010011) means the match
               rule is 'if-match localprecedence 0 1 4 6'
DropPriority: 0~2, up to 3 values can be input.  The bit set to 1
              of the last 3 bits of hh3cCBQoSMatchRuleIntValue1 is
              used to indicate the value 0~2.
ServiceDot1p: 0~7, up to 8 values can be input.
              The bit set to 1 of the last 8 bits of
              hh3cCBQoSMatchRuleIntValue1 is used to indicate
              the value 0~7.
  for example: 0x53(Binary format is 01010011) means the match
               rule is 'if-match service-dot1p 0 1 4 6'
SecondMplsExp: value:0~7, up to 8 values can be input.  The bit
               set to 1 of the last 8 bits of hh3cCBQoSMatchRuleIntValue1
               is used to indicate the 8 value 0~7.
  for example: 0x53(Binary format is 01010011) means the
               match rule is 'if-match mpls 0 1 4 6'
PacketLength: 1~2000.  hh3cCBQoSMatchRuleIntValue1 is used to
              indicate the minimum value, hh3cCBQoSMatchRuleIntValue2
              is used to indicate the maximum value.
ForwardingLayer: {bridge(1), route(2)}
other types: Set is not permitted.  0xffffffff will be returned
             when getting.

MIB

HH3C-CBQOS2-MIB

OID

.1.3.6.1.4.1.25506.2.65.2.1.1.3.1.5

Type

column

Access

readwrite

Status

current

Parent

hh3cCBQoSMatchRuleCfgInfoEntry

Table

hh3cCBQoSMatchRuleCfgInfoTable

Siblings

8