h3cVoiceIfCfgEchoCancelDelay
H3C-VOICE-IF-MIB ·
.1.3.6.1.4.1.2011.10.2.39.13.1.1.1.6
Object
column
r/w
Integer32
This object indicates the delay of the echo cancellation for the voice interface. This value couldn't be modified unless h3cVoiceIfCfgEchoCancelSwitch is enable. Unit is milliseconds. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line. The default value of this object is 32.
Context
- MIB
- H3C-VOICE-IF-MIB
- OID
.1.3.6.1.4.1.2011.10.2.39.13.1.1.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- h3cVoiceIfConfigEntry
- Table
- h3cVoiceIfConfigTable
- Siblings
- 9
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-64
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| h3cVoiceIfCfgCngOn This object indicates whether the silence gaps should be
filled with background noise. It is applicable to FXO, FXS,
E&M subscriber lines and E1/T1 voice subscriber line. | column | Enumeration | .1.3.6.1.4.1.2011.10.2.39.13.1.1.1.1 |
| h3cVoiceIfCfgRegTone This object uses 2 or 3 letter country code specify voice
parameters of different countrys. This value will take effect
on all voice interfaces of all cards on the device. | column | OctetString | .1.3.6.1.4.1.2011.10.2.39.13.1.1.1.10 |
| h3cVoiceIfCfgNonLinearSwitch This object expresses the nonlinear processing is enable
or disable for the voice interface. It is applicable to FXO,
FXS, E&M subscriber lines and E1/T1 voice subscriber line.
Cu… | column | Enumeration | .1.3.6.1.4.1.2011.10.2.39.13.1.1.1.2 |
| h3cVoiceIfCfgInputGain This object indicates the amount of gain added to the receiver
side of the voice interface. Unit is 0.1 db. It is applicable to
FXO, FXS, E&M subscriber lines and E1/T1 voice subs… | column | Integer32 | .1.3.6.1.4.1.2011.10.2.39.13.1.1.1.3 |
| h3cVoiceIfCfgOutputGain This object indicates the amount of gain added to the send side
of the voice interface. Unit is 0.1 db. It is applicable to FXO,
FXS, E&M subscriber lines and E1/T1 voice subscrib… | column | Integer32 | .1.3.6.1.4.1.2011.10.2.39.13.1.1.1.4 |
| h3cVoiceIfCfgEchoCancelSwitch This object indicates whether the echo cancellation is enabled.
It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice
subscriber line. | column | Enumeration | .1.3.6.1.4.1.2011.10.2.39.13.1.1.1.5 |
| h3cVoiceIfCfgTimerDialInterval The interval, in seconds, between two dialing numbers.
The default value of this object is 10 seconds. It is
applicable to FXO, FXS, E&M subscriber lines and E1/T1 with
loop-start… | column | Integer32 | .1.3.6.1.4.1.2011.10.2.39.13.1.1.1.7 |
| h3cVoiceIfCfgTimerFirstDial The period of time, in seconds, before dialing the first
number. The default value of this object is 10 seconds. It
is applicable to FXO, FXS subscriber lines and E1/T1 with
loop-… | column | Integer32 | .1.3.6.1.4.1.2011.10.2.39.13.1.1.1.8 |
| h3cVoiceIfCfgPrivateline This object indicates the E.164 phone number for plar mode.
It is applicable to FXO, FXS, E&M subscriber lines and E1/T1
voice subscriber line. | column | OctetString | .1.3.6.1.4.1.2011.10.2.39.13.1.1.1.9 |