h3cRdPrimAccIpAddrType
H3C-RADIUS-MIB ·
.1.3.6.1.4.1.2011.10.2.13.1.2.1.2
Object
The IP addresses type (IPv4 or IPv6) of primary RADIUS accounting server.
Context
- MIB
- H3C-RADIUS-MIB
- OID
.1.3.6.1.4.1.2011.10.2.13.1.2.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- h3cRdAccInfoEntry
- Table
- h3cRdAccInfoTable
- Siblings
- 31
Syntax
INET-ADDRESS-MIBInetAddressType
- Source
- INET-ADDRESS-MIBInetAddressType
- Base type
Enumeration
Values & Constraints
Type Values
0 | unknown |
1 | ipv4 |
2 | ipv6 |
3 | ipv4z |
4 | ipv6z |
16 | dns |
25 | l2vpn |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| h3cRdAccGroupName The name of the RADIUS group referred to in this table entry. | column | OctetString | .1.3.6.1.4.1.2011.10.2.13.1.2.1.1 |
| h3cRdAccKey The secret shared between the RADIUS client and RADIUS
accounting server used in encoding and decoding sensitive data.
When read, h3cRdAccKey always returns an Octet String of len… | column | OctetString | .1.3.6.1.4.1.2011.10.2.13.1.2.1.10 |
| h3cRdAccRetry The number of attempt the client will make when trying to send
requests to a server before it will consider the attempt failed.
Default value is 3. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.13.1.2.1.11 |
| h3cRdAccTimeout The timeout value the client will use when sending requests to a server.
The unit is second. Default value is 3. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.13.1.2.1.12 |
| h3cRdAccServerType Specify the type of RADIUS server.
1 (standard) - Server based on RFC protocol(s).
2 (iphotel) - Server for IP-Hotel or 201+ system.
3 (portal) - Server for iTellin Portal system.… | column | Enumeration | .1.3.6.1.4.1.2011.10.2.13.1.2.1.13 |
| h3cRdAccQuietTime The time for server returning active. The unit is minute.
When the value is 0, the server state retains active. Default value is 5. | column | Integer32 | .1.3.6.1.4.1.2011.10.2.13.1.2.1.14 |
| h3cRdAccFailureAction Defines the action that authentication should take if
authentication succeeds but the associated accounting start
fails.
1 (ignore) - treat as authentication success; ignore
a… | column | Enumeration | .1.3.6.1.4.1.2011.10.2.13.1.2.1.15 |
| h3cRdAccRealTime Interval of realtime-accounting packets.
The unit is defined by h3cRdAccRealTimeUnit.
When the value is 0, the device doesn't send realtime-accounting
packets. Default value is 1… | column | Integer32 | .1.3.6.1.4.1.2011.10.2.13.1.2.1.16 |
| h3cRdAccRealTimeRetry The number of attempt the client will make when trying to send
realtime-accounting packet to accounting server before it will
consider the attempt failed. Default value is 5. | column | Integer32 | .1.3.6.1.4.1.2011.10.2.13.1.2.1.17 |
| h3cRdAccSaveStopPktEnable The control of whether save stop-accounting packet in local buffer
and resend later when the accounting server doesn't respond. When
SaveStopPktEnable is set to false, the value … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.13.1.2.1.18 |
| h3cRdAccStopRetry The number of attempt the client will make when trying to send
stop-accounting packet to accounting server. Default value is 500. | column | Integer32 | .1.3.6.1.4.1.2011.10.2.13.1.2.1.19 |
| h3cRdAccDataFlowUnit Specify data flow format that is sent to RADIUS server. The value
SHOULD be set the same as the value of corresponding server.
1 (byte) - Specify 'byte' as the unit of data flow… | column | Enumeration | .1.3.6.1.4.1.2011.10.2.13.1.2.1.20 |
| h3cRdAccPacketUnit Specify packet format that is sent to RADIUS server. The value
SHOULD be set the same as the value of corresponding server.
1 (onePacket) - Specify 'one-packet' as the unit of p… | column | Enumeration | .1.3.6.1.4.1.2011.10.2.13.1.2.1.21 |
| h3cRdAccRowStatus This object is responsible for managing the creation, deletion and
modification of rows, which support active status and CreateAndGo,
Destroy operation. To create a new row, h3cR… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.10.2.13.1.2.1.22 |
| h3cRdAcctOnEnable The control of Accounting-On function. The Accounting-On function is
used by the client to mark the start of accounting (for example, upon
booting) by sending Accounting-On packe… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.13.1.2.1.23 |
| h3cRdAcctOnSendTimes The number of Accounting-On packets the client will send before it
considers the accounting server failed. Default value is 50. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.13.1.2.1.24 |
| h3cRdAcctOnSendInterval Interval of Accounting-On packets. The unit is second.
Default value is 3. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.13.1.2.1.25 |
| h3cRdSecAccKey The secret shared between the RADIUS client and the secondary RADIUS
accounting server used in encoding and decoding sensitive data.
When read, h3cRdSecAccKey always returns an Oc… | column | OctetString | .1.3.6.1.4.1.2011.10.2.13.1.2.1.26 |
| h3cRdPrimAccVpnName The human-readable name of the VPN in which the primary RADIUS
accounting server is placed. | column | OctetString | .1.3.6.1.4.1.2011.10.2.13.1.2.1.27 |
| h3cRdSecAccVpnName The human-readable name of the VPN in which the secondary RADIUS
accounting server is placed. | column | OctetString | .1.3.6.1.4.1.2011.10.2.13.1.2.1.28 |
| h3cRdAccNasIpAddrType The type (IPv4 or IPv6) of the source IP used to communicate with
RADIUS accounting server. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.10.2.13.1.2.1.29 |
| h3cRdPrimAccIpAddr The IP address of primary RADIUS accounting server. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.10.2.13.1.2.1.3 |
| h3cRdAccNasIpAddr The source IPv4 address used to communicate with the RADIUS accounting
server. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.2011.10.2.13.1.2.1.30 |
| h3cRdAccNasIpv6Addr The source IPv6 address used to communicate with the RADIUS accounting
server. | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.2011.10.2.13.1.2.1.31 |
| h3cRdAccRealTimeUnit The interval unit of realtime-accounting packets.
0 - minute.
1 - second. | column | Enumeration | .1.3.6.1.4.1.2011.10.2.13.1.2.1.32 |
| h3cRdPrimAccUdpPort The UDP port the client is using to send requests to primary
RADIUS accounting server. Default value is 1813. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.13.1.2.1.4 |
| h3cRdPrimAccState The state of the primary RADIUS accounting server.
1 (active) The primary accounting server is in active state.
2 (block) The primary accounting server is in block state. | column | Enumeration | .1.3.6.1.4.1.2011.10.2.13.1.2.1.5 |
| h3cRdSecAccIpAddrType The IP addresses type (IPv4 or IPv6) of secondary RADIUS accounting
server. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.10.2.13.1.2.1.6 |
| h3cRdSecAccIpAddr The IP address of secondary RADIUS accounting server. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.10.2.13.1.2.1.7 |
| h3cRdSecAccUdpPort The UDP port the client is using to send requests to secondary
RADIUS accounting server. Default value is 1813. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.13.1.2.1.8 |
| h3cRdSecAccState The state of the secondary RADIUS accounting server.
1 (active) The secondary accounting server is in active state.
2 (block) The secondary accounting server is in block state. | column | Enumeration | .1.3.6.1.4.1.2011.10.2.13.1.2.1.9 |