h3cRdAccRowStatus

H3C-RADIUS-MIB · .1.3.6.1.4.1.2011.10.2.13.1.2.1.22
MIB view Table view

Object

column r/w SNMPv2-TCRowStatus 
This object is responsible for managing the creation, deletion and
modification of rows, which support active status and CreateAndGo,
Destroy operation.  To create a new row, h3cRdAccGroupName must be specified.
To destroy an existent row, the h3cRdAccGroupName MUST NOT be referred by
h3cDomainTable in h3cDomainRadiusGroupName column.

Context

MIB
H3C-RADIUS-MIB
OID
.1.3.6.1.4.1.2011.10.2.13.1.2.1.22
Type
column
Access
readwrite
Status
current
Parent
h3cRdAccInfoEntry
Table
h3cRdAccInfoTable
Siblings
31

Syntax

SNMPv2-TCRowStatus
Source
SNMPv2-TCRowStatus
Base type
Enumeration

Values & Constraints

Type Values
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
h3cRdAccGroupName
The name of the RADIUS group referred to in this table entry.
columnOctetString.1.3.6.1.4.1.2011.10.2.13.1.2.1.1
h3cRdAccKey
The secret shared between the RADIUS client and RADIUS accounting server used in encoding and decoding sensitive data. When read, h3cRdAccKey always returns an Octet String of len…
columnOctetString.1.3.6.1.4.1.2011.10.2.13.1.2.1.10
h3cRdAccRetry
The number of attempt the client will make when trying to send requests to a server before it will consider the attempt failed. Default value is 3.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.10.2.13.1.2.1.11
h3cRdAccTimeout
The timeout value the client will use when sending requests to a server. The unit is second. Default value is 3.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.10.2.13.1.2.1.12
h3cRdAccServerType
Specify the type of RADIUS server. 1 (standard) - Server based on RFC protocol(s). 2 (iphotel) - Server for IP-Hotel or 201+ system. 3 (portal) - Server for iTellin Portal system.…
columnEnumeration.1.3.6.1.4.1.2011.10.2.13.1.2.1.13
h3cRdAccQuietTime
The time for server returning active. The unit is minute. When the value is 0, the server state retains active. Default value is 5.
columnInteger32.1.3.6.1.4.1.2011.10.2.13.1.2.1.14
h3cRdAccFailureAction
Defines the action that authentication should take if authentication succeeds but the associated accounting start fails. 1 (ignore) - treat as authentication success; ignore a…
columnEnumeration.1.3.6.1.4.1.2011.10.2.13.1.2.1.15
h3cRdAccRealTime
Interval of realtime-accounting packets. The unit is defined by h3cRdAccRealTimeUnit. When the value is 0, the device doesn't send realtime-accounting packets. Default value is 1…
columnInteger32.1.3.6.1.4.1.2011.10.2.13.1.2.1.16
h3cRdAccRealTimeRetry
The number of attempt the client will make when trying to send realtime-accounting packet to accounting server before it will consider the attempt failed. Default value is 5.
columnInteger32.1.3.6.1.4.1.2011.10.2.13.1.2.1.17
h3cRdAccSaveStopPktEnable
The control of whether save stop-accounting packet in local buffer and resend later when the accounting server doesn't respond. When SaveStopPktEnable is set to false, the value …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.10.2.13.1.2.1.18
h3cRdAccStopRetry
The number of attempt the client will make when trying to send stop-accounting packet to accounting server. Default value is 500.
columnInteger32.1.3.6.1.4.1.2011.10.2.13.1.2.1.19
h3cRdPrimAccIpAddrType
The IP addresses type (IPv4 or IPv6) of primary RADIUS accounting server.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.2011.10.2.13.1.2.1.2
h3cRdAccDataFlowUnit
Specify data flow format that is sent to RADIUS server. The value SHOULD be set the same as the value of corresponding server. 1 (byte) - Specify 'byte' as the unit of data flow…
columnEnumeration.1.3.6.1.4.1.2011.10.2.13.1.2.1.20
h3cRdAccPacketUnit
Specify packet format that is sent to RADIUS server. The value SHOULD be set the same as the value of corresponding server. 1 (onePacket) - Specify 'one-packet' as the unit of p…
columnEnumeration.1.3.6.1.4.1.2011.10.2.13.1.2.1.21
h3cRdAcctOnEnable
The control of Accounting-On function. The Accounting-On function is used by the client to mark the start of accounting (for example, upon booting) by sending Accounting-On packe…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.10.2.13.1.2.1.23
h3cRdAcctOnSendTimes
The number of Accounting-On packets the client will send before it considers the accounting server failed. Default value is 50.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.10.2.13.1.2.1.24
h3cRdAcctOnSendInterval
Interval of Accounting-On packets. The unit is second. Default value is 3.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.10.2.13.1.2.1.25
h3cRdSecAccKey
The secret shared between the RADIUS client and the secondary RADIUS accounting server used in encoding and decoding sensitive data. When read, h3cRdSecAccKey always returns an Oc…
columnOctetString.1.3.6.1.4.1.2011.10.2.13.1.2.1.26
h3cRdPrimAccVpnName
The human-readable name of the VPN in which the primary RADIUS accounting server is placed.
columnOctetString.1.3.6.1.4.1.2011.10.2.13.1.2.1.27
h3cRdSecAccVpnName
The human-readable name of the VPN in which the secondary RADIUS accounting server is placed.
columnOctetString.1.3.6.1.4.1.2011.10.2.13.1.2.1.28
h3cRdAccNasIpAddrType
The type (IPv4 or IPv6) of the source IP used to communicate with RADIUS accounting server.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.2011.10.2.13.1.2.1.29
h3cRdPrimAccIpAddr
The IP address of primary RADIUS accounting server.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.10.2.13.1.2.1.3
h3cRdAccNasIpAddr
The source IPv4 address used to communicate with the RADIUS accounting server.
columnRFC1155-SMIIpAddress.1.3.6.1.4.1.2011.10.2.13.1.2.1.30
h3cRdAccNasIpv6Addr
The source IPv6 address used to communicate with the RADIUS accounting server.
columnIPV6-TCIpv6Address.1.3.6.1.4.1.2011.10.2.13.1.2.1.31
h3cRdAccRealTimeUnit
The interval unit of realtime-accounting packets. 0 - minute. 1 - second.
columnEnumeration.1.3.6.1.4.1.2011.10.2.13.1.2.1.32
h3cRdPrimAccUdpPort
The UDP port the client is using to send requests to primary RADIUS accounting server. Default value is 1813.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.10.2.13.1.2.1.4
h3cRdPrimAccState
The state of the primary RADIUS accounting server. 1 (active) The primary accounting server is in active state. 2 (block) The primary accounting server is in block state.
columnEnumeration.1.3.6.1.4.1.2011.10.2.13.1.2.1.5
h3cRdSecAccIpAddrType
The IP addresses type (IPv4 or IPv6) of secondary RADIUS accounting server.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.2011.10.2.13.1.2.1.6
h3cRdSecAccIpAddr
The IP address of secondary RADIUS accounting server.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.10.2.13.1.2.1.7
h3cRdSecAccUdpPort
The UDP port the client is using to send requests to secondary RADIUS accounting server. Default value is 1813.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.10.2.13.1.2.1.8
h3cRdSecAccState
The state of the secondary RADIUS accounting server. 1 (active) The secondary accounting server is in active state. 2 (block) The secondary accounting server is in block state.
columnEnumeration.1.3.6.1.4.1.2011.10.2.13.1.2.1.9