h3cIpxIfUpdateChangeOnly
H3C-IPX-MIB ·
.1.3.6.1.4.1.2011.10.2.34.1.2.1.6
Object
column
r/w
EnabledStatus
When this variable is set to 'enabled', updating change is on. And sap and rip will send updating packets periodically to avoid broadcast storm. Whereas updating change is off.
Context
- MIB
- H3C-IPX-MIB
- OID
.1.3.6.1.4.1.2011.10.2.34.1.2.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- h3cIpxIfConfigEntry
- Table
- h3cIpxIfConfigTable
- Siblings
- 12
Syntax
EnabledStatus
- Source
- EnabledStatus
- Base type
Enumeration
Values & Constraints
Type Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| h3cIpxIfIndex This variable uniquely identifies the interface
to which the configurations are applied. | column | Integer32 | .1.3.6.1.4.1.2011.10.2.34.1.2.1.1 |
| h3cIpxIfSapStatus The status of sap on the current interface. It is enabled
when ipx is enabled on this interface. | column | EnabledStatus | .1.3.6.1.4.1.2011.10.2.34.1.2.1.10 |
| h3cIpxIfSapMtu This variable is used to define the max length of SAP
refreshing packets. | column | Integer32 | .1.3.6.1.4.1.2011.10.2.34.1.2.1.11 |
| h3cIpxIfGnsReply This object is used to enable or disable the current
interface to response the IPX GNS request. | column | EnabledStatus | .1.3.6.1.4.1.2011.10.2.34.1.2.1.12 |
| h3cIpxIfRowStatus The status of this row. To create a row, user can
select 'createAndGo'. If the row is created successfully,
this object will became 'active'. To delete one row,
user can select… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.10.2.34.1.2.1.13 |
| h3cIpxIfNetId The network number of the IPX address of this
interface. | column | OctetString | .1.3.6.1.4.1.2011.10.2.34.1.2.1.2 |
| h3cIpxIfNodeId The node number of the IPX address of this interface. | column | OctetString | .1.3.6.1.4.1.2011.10.2.34.1.2.1.3 |
| h3cIpxIfSplitHorizon This node is used to set the split horizon status.
Its default value is 'enabled'. In this case, the interface
which receives a message can't send this message from the
same inter… | column | EnabledStatus | .1.3.6.1.4.1.2011.10.2.34.1.2.1.4 |
| h3cIPxIfTick This object is used to set this interface's delay time.
It is counted by ticks which is 1/18 second. By default,
the ethernet interface's delay time is 1 tick,
asynchronous serial… | column | Integer32 | .1.3.6.1.4.1.2011.10.2.34.1.2.1.5 |
| h3cIpxIfRipMtu This variable is used to define the max length of RIP
updating packets. | column | Integer32 | .1.3.6.1.4.1.2011.10.2.34.1.2.1.7 |
| h3cIpxIfEncapsuleType This node is used to define the encapsulating form of
IPX packets. 'dot2' indicates the form is 802.2, while 'dot3'
means 802.3. And 'snap' indicates the form is ethernet-snap.
It… | column | Enumeration | .1.3.6.1.4.1.2011.10.2.34.1.2.1.8 |
| h3cIpxIfNetbiosPropagation This node is used to configure whether the current interface
can forward broadcasting packets which IPX type is 20 used
for NetBIOS. | column | EnabledStatus | .1.3.6.1.4.1.2011.10.2.34.1.2.1.9 |