h3cIpxIfIndex
H3C-IPX-MIB ·
.1.3.6.1.4.1.2011.10.2.34.1.2.1.1
Object
column
Integer32
This variable uniquely identifies the interface to which the configurations are applied.
Context
- MIB
- H3C-IPX-MIB
- OID
.1.3.6.1.4.1.2011.10.2.34.1.2.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- h3cIpxIfConfigEntry
- Table
- h3cIpxIfConfigTable
- Siblings
- 12
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| h3cIpxIfSapStatus The status of sap on the current interface. It is enabled
when ipx is enabled on this interface. | column | EnabledStatus | .1.3.6.1.4.1.2011.10.2.34.1.2.1.10 |
| h3cIpxIfSapMtu This variable is used to define the max length of SAP
refreshing packets. | column | Integer32 | .1.3.6.1.4.1.2011.10.2.34.1.2.1.11 |
| h3cIpxIfGnsReply This object is used to enable or disable the current
interface to response the IPX GNS request. | column | EnabledStatus | .1.3.6.1.4.1.2011.10.2.34.1.2.1.12 |
| h3cIpxIfRowStatus The status of this row. To create a row, user can
select 'createAndGo'. If the row is created successfully,
this object will became 'active'. To delete one row,
user can select… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.10.2.34.1.2.1.13 |
| h3cIpxIfNetId The network number of the IPX address of this
interface. | column | OctetString | .1.3.6.1.4.1.2011.10.2.34.1.2.1.2 |
| h3cIpxIfNodeId The node number of the IPX address of this interface. | column | OctetString | .1.3.6.1.4.1.2011.10.2.34.1.2.1.3 |
| h3cIpxIfSplitHorizon This node is used to set the split horizon status.
Its default value is 'enabled'. In this case, the interface
which receives a message can't send this message from the
same inter… | column | EnabledStatus | .1.3.6.1.4.1.2011.10.2.34.1.2.1.4 |
| h3cIPxIfTick This object is used to set this interface's delay time.
It is counted by ticks which is 1/18 second. By default,
the ethernet interface's delay time is 1 tick,
asynchronous serial… | column | Integer32 | .1.3.6.1.4.1.2011.10.2.34.1.2.1.5 |
| h3cIpxIfUpdateChangeOnly When this variable is set to 'enabled', updating change is
on. And sap and rip will send updating packets periodically
to avoid broadcast storm. Whereas updating change is
off. | column | EnabledStatus | .1.3.6.1.4.1.2011.10.2.34.1.2.1.6 |
| h3cIpxIfRipMtu This variable is used to define the max length of RIP
updating packets. | column | Integer32 | .1.3.6.1.4.1.2011.10.2.34.1.2.1.7 |
| h3cIpxIfEncapsuleType This node is used to define the encapsulating form of
IPX packets. 'dot2' indicates the form is 802.2, while 'dot3'
means 802.3. And 'snap' indicates the form is ethernet-snap.
It… | column | Enumeration | .1.3.6.1.4.1.2011.10.2.34.1.2.1.8 |
| h3cIpxIfNetbiosPropagation This node is used to configure whether the current interface
can forward broadcasting packets which IPX type is 20 used
for NetBIOS. | column | EnabledStatus | .1.3.6.1.4.1.2011.10.2.34.1.2.1.9 |