h3cDomainState
H3C-DOMAIN-MIB ·
.1.3.6.1.4.1.2011.10.2.46.2.1.1.2
Object
column
r/w
Enumeration
The state of the domain, which reflects whether the domain is active. Default value is active.
Context
- MIB
- H3C-DOMAIN-MIB
- OID
.1.3.6.1.4.1.2011.10.2.46.2.1.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- h3cDomainInfoEntry
- Table
- h3cDomainInfoTable
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | active |
2 | block |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| h3cDomainName An index uniquely identifies a domain. | column | OctetString | .1.3.6.1.4.1.2011.10.2.46.2.1.1.1 |
| h3cDomainMessengerSpanTime The messenger service span time. The unit is minute.
It must be a multiple of 5. If the value of h3cDomainMessengerEnable is false,
the value of h3cDomainMessengerSpanTime is me… | column | Integer32 | .1.3.6.1.4.1.2011.10.2.46.2.1.1.10 |
| h3cDomainSelfServiceEnable The self service control. If set h3cDomainSelfServiceEnable to true,
h3cDomainSelfServiceURL must be set to a valid value.
Default value is FALSE. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.46.2.1.1.11 |
| h3cDomainSelfServiceURL Self-service URL(Uniform Resource Locator) of the domain. | column | OctetString | .1.3.6.1.4.1.2011.10.2.46.2.1.1.12 |
| h3cDomainAccFailureAction Defines the action that authentication should be taken if
authentication succeeds but the associated accounting start
fails.
1 (ignore) - treat as authentication success; ignore
… | column | Enumeration | .1.3.6.1.4.1.2011.10.2.46.2.1.1.13 |
| h3cDomainRowStatus This object is responsible for managing the creation, deletion and modification
of rows, which supports active status and CreateAndGo, Destroy operation. To destroy
an existent ro… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.10.2.46.2.1.1.14 |
| h3cDomainCurrentAccessNum The current access number of the domain. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.46.2.1.1.15 |
| h3cDomainIdleCutTime Authentication aging time. If no packet is transmitted during the aging time,
the authentication is aged out. | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.2011.10.2.46.2.1.1.16 |
| h3cDomainServiceType Service type of users in the domain, including hsi(1), stb(2), and voip(3).
The default value is hsi.
The High Speed Internet (hsi) service is applicable to users t… | column | Enumeration | .1.3.6.1.4.1.2011.10.2.46.2.1.1.17 |
| h3cDomainIpPoolName Specifies an IPv4 address pool for users in the domain. | column | OctetString | .1.3.6.1.4.1.2011.10.2.46.2.1.1.18 |
| h3cDomainIpv6PoolName Specifies an IPv6 address pool for users in the domain. | column | OctetString | .1.3.6.1.4.1.2011.10.2.46.2.1.1.19 |
| h3cDomainMaxAccessNum The maximum number which the domain allows to access. If the value
is set to 0, the access limit will be disabled. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.46.2.1.1.3 |
| h3cDomainVlanAssignMode The vlan assignment mode. The mode SHOULD be the same as the mode of
corresponding server.
1 (integer) - Integer Vlan assignment mode.
2 (string) - String Vlan assignment mode.
… | column | Enumeration | .1.3.6.1.4.1.2011.10.2.46.2.1.1.4 |
| h3cDomainIdleCutEnable The idle cut control. Setting this attribute to true, the connection will be
cut when the flow is less than h3cDomainIdleCutMinFlow and lasts
h3cDomainIdleCutMaxTime. Default val… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.46.2.1.1.5 |
| h3cDomainIdleCutMaxTime The maximal time of idle-cut. The unit is minute. If the value of
h3cDomainIdleCutEnable is false, the value of h3cDomainIdleCutMaxTime
is meaningless. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.46.2.1.1.6 |
| h3cDomainIdleCutMinFlow The minimal flow of idle-cut. The unit is byte. If the value of
h3cDomainIdleCutEnable is false, the value of h3cDomainIdleCutMinFlow
is meaningless. | column | Integer32 | .1.3.6.1.4.1.2011.10.2.46.2.1.1.7 |
| h3cDomainMessengerEnable The messenger service control. If set h3cDomainMessengerEnable to true,
h3cDomainMessengerLimitTime and h3cDomainMessengerSpanTime must be
set to valid values. Default value is … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.46.2.1.1.8 |
| h3cDomainMessengerLimitTime The messenger service limit time. The unit is minute. If the value of
h3cDomainMessengerEnable is false, the value of h3cDomainMessengerLimitTime
is meaningless. | column | Integer32 | .1.3.6.1.4.1.2011.10.2.46.2.1.1.9 |