h3cDomainServiceType
H3C-DOMAIN-MIB ·
.1.3.6.1.4.1.2011.10.2.46.2.1.1.17
Object
column
r/w
Enumeration
Service type of users in the domain, including hsi(1), stb(2), and voip(3).
The default value is hsi.
The High Speed Internet (hsi) service is applicable to users that access the
network through PPP, 802.1X, or IPoE. If this service is used, the multicast feature of
the access module is disabled to save system resources.
The Set Top Box (stb) service is applicable to users that access the network
through stb. If this service is used, the multicast feature of the access module
is enabled to improve the performance of the multicast module.
The Voice over IP (voip) service is applicable to users that access the network
through IP phones. If this service is used, the Quality of Service (QoS) module
increases the priority of voice traffic to reduce the transmission delay for
IP phone users.
Default value is hsi.
Context
- MIB
- H3C-DOMAIN-MIB
- OID
.1.3.6.1.4.1.2011.10.2.46.2.1.1.17- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- h3cDomainInfoEntry
- Table
- h3cDomainInfoTable
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | hsi |
2 | stb |
3 | voip |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| h3cDomainName An index uniquely identifies a domain. | column | OctetString | .1.3.6.1.4.1.2011.10.2.46.2.1.1.1 |
| h3cDomainMessengerSpanTime The messenger service span time. The unit is minute.
It must be a multiple of 5. If the value of h3cDomainMessengerEnable is false,
the value of h3cDomainMessengerSpanTime is me… | column | Integer32 | .1.3.6.1.4.1.2011.10.2.46.2.1.1.10 |
| h3cDomainSelfServiceEnable The self service control. If set h3cDomainSelfServiceEnable to true,
h3cDomainSelfServiceURL must be set to a valid value.
Default value is FALSE. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.46.2.1.1.11 |
| h3cDomainSelfServiceURL Self-service URL(Uniform Resource Locator) of the domain. | column | OctetString | .1.3.6.1.4.1.2011.10.2.46.2.1.1.12 |
| h3cDomainAccFailureAction Defines the action that authentication should be taken if
authentication succeeds but the associated accounting start
fails.
1 (ignore) - treat as authentication success; ignore
… | column | Enumeration | .1.3.6.1.4.1.2011.10.2.46.2.1.1.13 |
| h3cDomainRowStatus This object is responsible for managing the creation, deletion and modification
of rows, which supports active status and CreateAndGo, Destroy operation. To destroy
an existent ro… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.10.2.46.2.1.1.14 |
| h3cDomainCurrentAccessNum The current access number of the domain. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.46.2.1.1.15 |
| h3cDomainIdleCutTime Authentication aging time. If no packet is transmitted during the aging time,
the authentication is aged out. | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.2011.10.2.46.2.1.1.16 |
| h3cDomainIpPoolName Specifies an IPv4 address pool for users in the domain. | column | OctetString | .1.3.6.1.4.1.2011.10.2.46.2.1.1.18 |
| h3cDomainIpv6PoolName Specifies an IPv6 address pool for users in the domain. | column | OctetString | .1.3.6.1.4.1.2011.10.2.46.2.1.1.19 |
| h3cDomainState The state of the domain, which reflects whether the domain is active.
Default value is active. | column | Enumeration | .1.3.6.1.4.1.2011.10.2.46.2.1.1.2 |
| h3cDomainMaxAccessNum The maximum number which the domain allows to access. If the value
is set to 0, the access limit will be disabled. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.46.2.1.1.3 |
| h3cDomainVlanAssignMode The vlan assignment mode. The mode SHOULD be the same as the mode of
corresponding server.
1 (integer) - Integer Vlan assignment mode.
2 (string) - String Vlan assignment mode.
… | column | Enumeration | .1.3.6.1.4.1.2011.10.2.46.2.1.1.4 |
| h3cDomainIdleCutEnable The idle cut control. Setting this attribute to true, the connection will be
cut when the flow is less than h3cDomainIdleCutMinFlow and lasts
h3cDomainIdleCutMaxTime. Default val… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.46.2.1.1.5 |
| h3cDomainIdleCutMaxTime The maximal time of idle-cut. The unit is minute. If the value of
h3cDomainIdleCutEnable is false, the value of h3cDomainIdleCutMaxTime
is meaningless. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.46.2.1.1.6 |
| h3cDomainIdleCutMinFlow The minimal flow of idle-cut. The unit is byte. If the value of
h3cDomainIdleCutEnable is false, the value of h3cDomainIdleCutMinFlow
is meaningless. | column | Integer32 | .1.3.6.1.4.1.2011.10.2.46.2.1.1.7 |
| h3cDomainMessengerEnable The messenger service control. If set h3cDomainMessengerEnable to true,
h3cDomainMessengerLimitTime and h3cDomainMessengerSpanTime must be
set to valid values. Default value is … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.46.2.1.1.8 |
| h3cDomainMessengerLimitTime The messenger service limit time. The unit is minute. If the value of
h3cDomainMessengerEnable is false, the value of h3cDomainMessengerLimitTime
is meaningless. | column | Integer32 | .1.3.6.1.4.1.2011.10.2.46.2.1.1.9 |