h3cDomainRowStatus
H3C-DOMAIN-MIB ·
.1.3.6.1.4.1.2011.10.2.46.2.1.1.14
Object
This object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreateAndGo, Destroy operation. To destroy an existent row, the domain of the row MUST NOT be used by user.
Context
- MIB
- H3C-DOMAIN-MIB
- OID
.1.3.6.1.4.1.2011.10.2.46.2.1.1.14- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- h3cDomainInfoEntry
- Table
- h3cDomainInfoTable
- Siblings
- 18
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| h3cDomainName An index uniquely identifies a domain. | column | OctetString | .1.3.6.1.4.1.2011.10.2.46.2.1.1.1 |
| h3cDomainMessengerSpanTime The messenger service span time. The unit is minute.
It must be a multiple of 5. If the value of h3cDomainMessengerEnable is false,
the value of h3cDomainMessengerSpanTime is me… | column | Integer32 | .1.3.6.1.4.1.2011.10.2.46.2.1.1.10 |
| h3cDomainSelfServiceEnable The self service control. If set h3cDomainSelfServiceEnable to true,
h3cDomainSelfServiceURL must be set to a valid value.
Default value is FALSE. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.46.2.1.1.11 |
| h3cDomainSelfServiceURL Self-service URL(Uniform Resource Locator) of the domain. | column | OctetString | .1.3.6.1.4.1.2011.10.2.46.2.1.1.12 |
| h3cDomainAccFailureAction Defines the action that authentication should be taken if
authentication succeeds but the associated accounting start
fails.
1 (ignore) - treat as authentication success; ignore
… | column | Enumeration | .1.3.6.1.4.1.2011.10.2.46.2.1.1.13 |
| h3cDomainCurrentAccessNum The current access number of the domain. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.46.2.1.1.15 |
| h3cDomainIdleCutTime Authentication aging time. If no packet is transmitted during the aging time,
the authentication is aged out. | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.2011.10.2.46.2.1.1.16 |
| h3cDomainServiceType Service type of users in the domain, including hsi(1), stb(2), and voip(3).
The default value is hsi.
The High Speed Internet (hsi) service is applicable to users t… | column | Enumeration | .1.3.6.1.4.1.2011.10.2.46.2.1.1.17 |
| h3cDomainIpPoolName Specifies an IPv4 address pool for users in the domain. | column | OctetString | .1.3.6.1.4.1.2011.10.2.46.2.1.1.18 |
| h3cDomainIpv6PoolName Specifies an IPv6 address pool for users in the domain. | column | OctetString | .1.3.6.1.4.1.2011.10.2.46.2.1.1.19 |
| h3cDomainState The state of the domain, which reflects whether the domain is active.
Default value is active. | column | Enumeration | .1.3.6.1.4.1.2011.10.2.46.2.1.1.2 |
| h3cDomainMaxAccessNum The maximum number which the domain allows to access. If the value
is set to 0, the access limit will be disabled. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.46.2.1.1.3 |
| h3cDomainVlanAssignMode The vlan assignment mode. The mode SHOULD be the same as the mode of
corresponding server.
1 (integer) - Integer Vlan assignment mode.
2 (string) - String Vlan assignment mode.
… | column | Enumeration | .1.3.6.1.4.1.2011.10.2.46.2.1.1.4 |
| h3cDomainIdleCutEnable The idle cut control. Setting this attribute to true, the connection will be
cut when the flow is less than h3cDomainIdleCutMinFlow and lasts
h3cDomainIdleCutMaxTime. Default val… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.46.2.1.1.5 |
| h3cDomainIdleCutMaxTime The maximal time of idle-cut. The unit is minute. If the value of
h3cDomainIdleCutEnable is false, the value of h3cDomainIdleCutMaxTime
is meaningless. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.10.2.46.2.1.1.6 |
| h3cDomainIdleCutMinFlow The minimal flow of idle-cut. The unit is byte. If the value of
h3cDomainIdleCutEnable is false, the value of h3cDomainIdleCutMinFlow
is meaningless. | column | Integer32 | .1.3.6.1.4.1.2011.10.2.46.2.1.1.7 |
| h3cDomainMessengerEnable The messenger service control. If set h3cDomainMessengerEnable to true,
h3cDomainMessengerLimitTime and h3cDomainMessengerSpanTime must be
set to valid values. Default value is … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.10.2.46.2.1.1.8 |
| h3cDomainMessengerLimitTime The messenger service limit time. The unit is minute. If the value of
h3cDomainMessengerEnable is false, the value of h3cDomainMessengerLimitTime
is meaningless. | column | Integer32 | .1.3.6.1.4.1.2011.10.2.46.2.1.1.9 |