gb15629dot11wapiConfigPSKPassPhrase

GB15629dot11-WAPI-MIB · .1.2.156.11235.15629.11.1.1.1.1.1.18
Commands MIB view Table view

Object

column r/w SNMPv2-TCDisplayString 
The PSK value when WAPI in PSK mode is the selected AKM suite,
is configured by gb15629dot11wapiConfigPSKValue.
An alternative manner of setting the PSK uses the password-to-key
algorithm. This variable provides a means to enter a
pass-phrase. When this object is written, the WAPI entity shall
use the password-to-key algorithm to derive a preshared
and populate gb15629dot11wapiConfigPSKValue with this key.
This object is logically write-only. Reading this variable shall
return unsuccessful status or null or zero.

Context

MIB
GB15629dot11-WAPI-MIB
OID
.1.2.156.11235.15629.11.1.1.1.1.1.18
Type
column
Access
readwrite
Status
current
Parent
gb15629dot11wapiConfigEntry
Groups
1

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'GB15629dot11-WAPI-MIB' -M '/opt/observium/mibs/a3com:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'GB15629dot11-WAPI-MIB::gb15629dot11wapiConfigPSKPassPhrase'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'GB15629dot11-WAPI-MIB' -M '/opt/observium/mibs/a3com:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'GB15629dot11-WAPI-MIB::gb15629dot11wapiConfigPSKPassPhrase.<ifIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'GB15629dot11-WAPI-MIB' -M '/opt/observium/mibs/a3com:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'GB15629dot11-WAPI-MIB::gb15629dot11wapiConfigPSKPassPhrase'

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString
Display format
255a
Type Description
Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Type Constraints
range: 0..255

Conformance

Member of
gb15629dot11wapiBase