sensorGroupConfigScriptName

G6-SMARTOFFICE-MIB · .1.3.6.1.4.1.3181.10.6.4.99.5.1.8
MIB view Table view

Object

column r/w SNMPv2-TCDisplayString 
When the group is updated and the required conditions are met, the script specified in this parameter is executed. If the parameter is left blank, the standard MS_SmartOfficeControl.ms  script is executed. The specified script should not contain any time consuming functions. Syntax: = appname/filename:subroutine  The appname and subroutine name are optional. Without appname, the script must be located in xml_cli_scripts folder.

Context

MIB
G6-SMARTOFFICE-MIB
OID
.1.3.6.1.4.1.3181.10.6.4.99.5.1.8
Type
column
Access
readwrite
Status
current
Parent
sensorGroupConfigEntry
Table
sensorGroupConfigTable
Siblings
16

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
sensorGroupConfigIndex
Automatically generated
columnInteger32.1.3.6.1.4.1.3181.10.6.4.99.5.1.1
sensorGroupConfigReportMode
Defines if the sensor is passive or actively reports changes and error conditions
columnEnumeration.1.3.6.1.4.1.3181.10.6.4.99.5.1.10
sensorGroupConfigAdditionalParameter
Comma separated list of any parameter specific for this attribute if needed.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.4.99.5.1.11
sensorGroupConfigLowerBoundary
When the measured value of any sensor is equal or below this value an event is raised. The value may be configured directly with a numerical value optionally followed by a unit.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.4.99.5.1.12
sensorGroupConfigUpperBoundary
When the measured value of any sensor is equal or above this value an event is raised. The value may be configured directly with a numerical value optionally followed by a unit.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.4.99.5.1.13
sensorGroupConfigBoundaryHysteresis
How much the value must return within bounds before the alarm condition is cleared.
columnEnumeration.1.3.6.1.4.1.3181.10.6.4.99.5.1.14
sensorGroupConfigUpdateDelta
Defines how much the value can deviate before a value change is reported automatically. Depending on the setting of the report_mode an absolute or a percent value is expected.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.4.99.5.1.15
sensorGroupConfigRateLimit
Defines how quickly the value is reported. Defined In units of 100ms. 0 means no rate limiting.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.3181.10.6.4.99.5.1.16
sensorGroupConfigClearValues
Clear status values for minimum_peak_hold and maximum_peak_hold.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.4.99.5.1.17
sensorGroupConfigGroupName
Unique group name referenced by the director
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.4.99.5.1.2
sensorGroupConfigAttribute
The attribute which is configured. Locally, identical attributes of the associated devices listed below are grouped.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.4.99.5.1.3
sensorGroupConfigAssociatedDevices
List of all sensors that supply information to a particular group. When an instance is used, here the syntax devicename.instance is used. All records are comma separated.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.4.99.5.1.4
sensorGroupConfigValueCaching
When enabled the group target value is saved to local non volaive memory. Should the director restart, the cached values will be restored and send to the devices. This feature is …
columnEnumeration.1.3.6.1.4.1.3181.10.6.4.99.5.1.5
sensorGroupConfigRunScriptWhen
Defines which sensor group status needs to change in order to run the standard (and optional additional_script). This can be used to limit the number of script runs by not followi…
columnEnumeration.1.3.6.1.4.1.3181.10.6.4.99.5.1.6
sensorGroupConfigRunScriptDelta
Defines how much the value can deviate before a value change is reported automatically. Depending on the setting of the report_mode an absolute or a percent value is expected.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.4.99.5.1.7
sensorGroupConfigAdditionalScriptName
When the group is updated and the required conditions are met and a script is defined here, this script is executed in the background after the standard processing for this group …
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.4.99.5.1.9