deviceConfigAdditionalParameter
G6-SMARTOFFICE-MIB ·
.1.3.6.1.4.1.3181.10.6.4.99.3.1.11
Object
Comma separated list of any parameter specific for this device. Example: panel=type A,refresh_rate=12
Context
- MIB
- G6-SMARTOFFICE-MIB
- OID
.1.3.6.1.4.1.3181.10.6.4.99.3.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- deviceConfigEntry
- Table
- deviceConfigTable
- Siblings
- 17
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| deviceConfigIndex Automatically generated | column | Integer32 | .1.3.6.1.4.1.3181.10.6.4.99.3.1.1 |
| deviceConfigNetworkAddress May be an IP or other type of address depending on the given network access method. Can be left blank for a SmartLightController. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.4.99.3.1.10 |
| deviceConfigNetworkFailureAction Defines what the actor does if the network connection fails or after reboot until communication is established. | column | Enumeration | .1.3.6.1.4.1.3181.10.6.4.99.3.1.12 |
| deviceConfigIdentify The actor will blink with its status led to signal its presence and physical location. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.4.99.3.1.13 |
| deviceConfigRestart Restart the actor. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.4.99.3.1.14 |
| deviceConfigCalibrate Start calibration process (if available for this actor type). | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.4.99.3.1.15 |
| deviceConfigPair Start pairing process that couples individual device to this director. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.4.99.3.1.16 |
| deviceConfigUnpair Discard exisiting pairing between an individual device and this director. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.4.99.3.1.17 |
| deviceConfigUpdateFirmware Update the device firmware. When no file name is supplied, the latest version is automatically selected. Alternatively, a specific file name can be supplied to use another version… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.4.99.3.1.18 |
| deviceConfigDeviceName Unique group name referenced by the director | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.4.99.3.1.2 |
| deviceConfigLocation Free text to describe the position of the controller on the premesis. This value need NOT be savedwithin the sensor itself. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.4.99.3.1.3 |
| deviceConfigLatitude A value in degrees such as: 50,123 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.4.99.3.1.4 |
| deviceConfigLongitude A value in degrees such as: 50,123 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.4.99.3.1.5 |
| deviceConfigAltitude A value in meters. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.4.99.3.1.6 |
| deviceConfigPlacement Information where to find the controller | column | Enumeration | .1.3.6.1.4.1.3181.10.6.4.99.3.1.7 |
| deviceConfigProductType Defines via which network the sensor is reachable. | column | Enumeration | .1.3.6.1.4.1.3181.10.6.4.99.3.1.8 |
| deviceConfigDeviceId Unique manufacturer dependent identifier of the device. For SmartLightController the MAC address of the controller is entered here. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.4.99.3.1.9 |