firmwareMirrorSdCard – G6-FILES-MIB

Object

column r/w SNMPv2-TCDisplayString

The function mirrors the whole content of the SD card into the internal flash memory of a micro switch with internal memory. This command only executes when the device is currently running on the SD card to be copied. On switch versions without internal memory nothing will happen. There are two options. OVERWRITE: All data previously stored in the internal memory, including config and passwords, is overwritten. Possibly existing custom configurations or scripts are retained. REPLACE: The internal memory is first erased before the copy commences. Any existing data are removed. This assures are clean copy ofth SD card without possible extra data being retained. Note: The miror command will not operate when system.boot_preference is set to INTERN_ONLY to safeguard the device against an illegally inserted SD card. Syntax: mirror_sd_card = OVERWRITE (or REPLACE) (uppercase).

Context

MIB: G6-FILES-MIB
OID: .1.3.6.1.4.1.3181.10.6.3.72.5.1.12
Type: column
Access: readwrite
Status: current
Parent: firmwareEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'G6-FILES-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-FILES-MIB::firmwareMirrorSdCard'

More examples

Read one indexed instance

/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'G6-FILES-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'G6-FILES-MIB::firmwareMirrorSdCard.<firmwareIndex>'

Translate to a numeric OID

/usr/bin/snmptranslate -Pud -Ir -On -m 'G6-FILES-MIB' -M '/opt/observium/mibs/microsens:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'G6-FILES-MIB::firmwareMirrorSdCard'

Syntax

SNMPv2-TCDisplayString

Source: SNMPv2-TCDisplayString
Base type: OctetString
Display format: 255a

Type Description

Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Type Constraints

range: 0..255