agentPortPhysicalStatus
FSM7326-SWITCHING-MIB ·
.1.3.6.1.4.1.4526.1.9.1.2.13.1.8
Object
column
obsolete
Enumeration
The switch's Port Physical Speed Status. This is the current actual speed.
Context
- MIB
- FSM7326-SWITCHING-MIB
- OID
.1.3.6.1.4.1.4526.1.9.1.2.13.1.8- Type
- column
- Access
- readonly
- Status
- obsolete
- Parent
- agentPortConfigEntry
- Table
- agentPortConfigTable
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | auto-negotiate |
2 | half-10 |
3 | full-10 |
4 | half-100 |
5 | full-100 |
6 | half-100fx |
7 | full-100fx |
8 | full-1000sx |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| agentPortDot1dBasePort The port number of this port. | column | Integer32 | .1.3.6.1.4.1.4526.1.9.1.2.13.1.1 |
| agentPortClearStats clear stats for this port only | column | Enumeration | .1.3.6.1.4.1.4526.1.9.1.2.13.1.10 |
| agentPortDefaultType This object identifies the default administrative port type,
to be used in conjunction with the operational port type
denoted by agentPortType.
The set of possible … | column | ObjectIdentifier | .1.3.6.1.4.1.4526.1.9.1.2.13.1.11 |
| agentPortType This object identifies the port type. An initial set of MAU types
are defined in RFC 2668. The assignment of OBJECT IDENTIFIERs to
new types of MAUs is managed by the IANA. If … | column | ObjectIdentifier | .1.3.6.1.4.1.4526.1.9.1.2.13.1.12 |
| agentPortAutoNegAdminStatus This object identifies the administration status of auto negotiation
for this port. | column | Enumeration | .1.3.6.1.4.1.4526.1.9.1.2.13.1.13 |
| agentPortDot3FlowControlMode Config flowcontrol allows you to enable or disable
802.3x flow control for this port. This value
applies to only full-duplex mode ports. | column | Enumeration | .1.3.6.1.4.1.4526.1.9.1.2.13.1.14 |
| agentPortDVlanTagMode Controls the Double Vlan Tag mode on this port. | column | Enumeration | .1.3.6.1.4.1.4526.1.9.1.2.13.1.15 |
| agentPortDVlanTagEthertype Configures the Ethertype for the Double Vlan Tag for this port.
Commonly used are the Ethertypes for vman tags (34984, or 0x88A8)
and dot1q tags (33024, or 0x8100). | column | Integer32 | .1.3.6.1.4.1.4526.1.9.1.2.13.1.16 |
| agentPortDVlanTagCustomerId Configures the Customer ID for the Double Vlan Tag for this port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4526.1.9.1.2.13.1.17 |
| agentPortMaxFrameSizeLimit This object identifies the largest value that can be
configured for agentPortMaxFrameSize | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4526.1.9.1.2.13.1.18 |
| agentPortMaxFrameSize This object identifies the currently configured maximum frame size
value for this port. The maximmum value that this object can be set
to is the value of agentPortMaxFrameSizeLimi… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4526.1.9.1.2.13.1.19 |
| agentPortIfIndex The switch's Port IfIndex | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4526.1.9.1.2.13.1.2 |
| agentPortIanaType The switch's Port Type | column | IANAifType-MIBIANAifType | .1.3.6.1.4.1.4526.1.9.1.2.13.1.3 |
| agentPortSTPMode The switch's Port Spanning Tree Protocol Mode
STP mode values are:
dot1d (the default)
fast, indicates you want to use the fast spanning tree mode
off, indicates … | column | Enumeration | .1.3.6.1.4.1.4526.1.9.1.2.13.1.4 |
| agentPortSTPState The switch's Port Spanning Tree Protocol State.
This object is only supported when the Dot1d Protocol is enabled. | column | Enumeration | .1.3.6.1.4.1.4526.1.9.1.2.13.1.5 |
| agentPortAdminMode The switch's Port Admin Mode | column | Enumeration | .1.3.6.1.4.1.4526.1.9.1.2.13.1.6 |
| agentPortPhysicalMode obsolete The switch's Port Speed Mode. This is the configured physical mode.
This object is read-only for gigabit ports | column | Enumeration | .1.3.6.1.4.1.4526.1.9.1.2.13.1.7 |
| agentPortLinkTrapMode If enabled, link up and link down traps will be sent for this port. | column | Enumeration | .1.3.6.1.4.1.4526.1.9.1.2.13.1.9 |