fsIfQosFlowLimitExceedAction

FS-ROUTER-QOS-MIB · .1.3.6.1.4.1.52642.1.1.10.2.106.2.8.1.7

Object

column Enumeration

Action to be taken by the traffic, when the traffic is exceeds the CIR.
There are the following actions:
Continue(1) -- Continue to be processed by the following 
               CAR policy which applied on the interface.
drop(2) -- Discard the packet. 
set-dscp-continue(3) -- Remark the IP dscp of IP packet,
                           and then continue to be processed by 
                           the following CAR policy., 
set-dscp-transmit(4) -- Remark the IP dscp of IP packet,
                       and then send the packet.
set-prec-continue(5) -- Remark the IP precedence of IP packet,
                           and then continue to be processed by 
                           the following CAR policy.
set-prec-transmit(6) -- Remark the IP precedence of IP packet,
                       and then send the packet.
transmit(7) -- Send the packet directly. 
set-mpls-exp-continue(8) -- Remark the mpls exp field of mpls packet,
                              and then continue to be processed by 
                              the following CAR policy.
set-mpls-exp-transmit(9) -- Remark the mpls exp field of mpls packet,
                          and then send the packet.

Context

MIB: FS-ROUTER-QOS-MIB
OID: .1.3.6.1.4.1.52642.1.1.10.2.106.2.8.1.7
Type: column
Access: readonly
Status: current
Parent: fsIfQosFlowLimitRunInfoEntry
Table: fsIfQosFlowLimitRunInfoTable
Siblings: 12

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	continue
`2`	drop
`3`	set-dscp-continue
`4`	set-dscp-transmit
`5`	set-prec-continue
`6`	set-prec-transmit
`7`	transmit
`8`	set-mpls-exp-continue
`9`	set-mpls-exp-transmit

Related Objects

Sibling Objects

Object	Type	Syntax	OID
fsIfQosFlowLimitLabelNum This is the label number of flow limit.	column	Integer32	`.1.3.6.1.4.1.52642.1.1.10.2.106.2.8.1.1`
fsIfQosFlowLimitConformPkt The number of packets which conformed CIR.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.52642.1.1.10.2.106.2.8.1.10`
fsIfQosFlowLimitConformByte The bytes of packets which conformed CIR.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.52642.1.1.10.2.106.2.8.1.11`
fsIfQosFlowLimitExceedPkt The number of packets which exceeded CIR.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.52642.1.1.10.2.106.2.8.1.12`
fsIfQosFlowLimitExceedByte the bytes of packets which exceeded CIR.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.52642.1.1.10.2.106.2.8.1.13`
fsIfQosFlowLimitPktDirection One of the index of the flow limit table. This is the direction of traffic. There are two directions: input(1) and output(2)	column	Enumeration	`.1.3.6.1.4.1.52642.1.1.10.2.106.2.8.1.2`
fsIfQosFlowLimitCIR The Committed Information Rate. Unit: bps. This is the target rate which the flow limit policy limits.	column	Integer32	`.1.3.6.1.4.1.52642.1.1.10.2.106.2.8.1.3`
fsIfQosFlowLimitBurstSize Burst traffic size. Unit: bit. This is the amount of traffic in excess of the committed information rate that will be permitted by the flow limit policy.	column	Integer32	`.1.3.6.1.4.1.52642.1.1.10.2.106.2.8.1.4`
fsIfQosFlowLimitExcessBurstSize Excess Burst Size. Unit: bit. This is the amount of traffic in excess of the burst size, which may be conditionally permitted by the flow limit policy.	column	Integer32	`.1.3.6.1.4.1.52642.1.1.10.2.106.2.8.1.5`
fsIfQosFlowLimitConformAction Action to be taken by the traffic, when the traffic conforms CIR. There are the following actions: Continue(1) -- Continue to be processed by the following CAR po…	column	Enumeration	`.1.3.6.1.4.1.52642.1.1.10.2.106.2.8.1.6`
fsIfQosFlowLimitConformNewPrec Rewrite the precedence value on packets when traffic is within the CIR	column	Integer32	`.1.3.6.1.4.1.52642.1.1.10.2.106.2.8.1.8`
fsIfQosFlowLimitExceedNewPrec Rewrite the precedence value on packets when traffic is out of CIR	column	Integer32	`.1.3.6.1.4.1.52642.1.1.10.2.106.2.8.1.9`