snFsrpIfTrackPortMask
FOUNDRY-SN-IP-MIB ·
.1.3.6.1.4.1.1991.1.2.7.2.1.1.6
Object
This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Standalone router FSRP Track port membership (Not used for Chassis Product)
Context
- MIB
- FOUNDRY-SN-IP-MIB
- OID
.1.3.6.1.4.1.1991.1.2.7.2.1.1.6- Type
- column
- Access
- readwrite
- Status
- deprecated
- Parent
- snFsrpIfEntry
- Table
- snFsrpIfTable
- Siblings
- 11
Syntax
FOUNDRY-SN-SWITCH-GROUP-MIBPortMask
- Source
- FOUNDRY-SN-SWITCH-GROUP-MIBPortMask
- Base type
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| snFsrpIfPort The physical router port of this FSRP interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.2.7.2.1.1.1 |
| snFsrpIfRouterDeadTime The hold time of the Fsrp router is from 3 to 255 seconds. | column | Integer32 | .1.3.6.1.4.1.1991.1.2.7.2.1.1.10 |
| snFsrpIfChassisTrackPortMask deprecated This object specifies the identity of the physical port
whose state is to be monitored. Each bit is a port of
the system. Default value is 0. If this object is configured
then … | column | OctetString | .1.3.6.1.4.1.1991.1.2.7.2.1.1.11 |
| snFsrpIfTrackPortList This object specifies the identity of the physical port
whose state is to be monitored. Each port index is a
16-bit integer in big endian order. 8-bit is the slot
number, the ot… | column | OctetString | .1.3.6.1.4.1.1991.1.2.7.2.1.1.12 |
| snFsrpIfIpAddress The IP Address of the physical router port of this
interface. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1991.1.2.7.2.1.1.2 |
| snFsrpIfVirRtrIpAddr The IP Address of the Virtual Router for the interface.
The Virtual Router IP address need to be configured on
the interface before Redundant Router Function can operate
on the i… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1991.1.2.7.2.1.1.3 |
| snFsrpIfOtherRtrIpAddr The IP Address of the Other Router on this ip subnet
that operates FSRP and to whom the Keep Alive message
need to be sent by this router. This object must be
configured for FSRP… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1991.1.2.7.2.1.1.4 |
| snFsrpIfPreferLevel The higher the number the higher the priority is.
This parameter decides which router should becomes
the Active Router for the interface. A Router with
higher priority selected t… | column | Integer32 | .1.3.6.1.4.1.1991.1.2.7.2.1.1.5 |
| snFsrpIfRowStatus This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new r… | column | Enumeration | .1.3.6.1.4.1.1991.1.2.7.2.1.1.7 |
| snFsrpIfState This object specifies the FSRP Router's interface state as:
init(0)...initialization state.
negotiating(1)...negotiating state.
standby(2)...standby state.
active(3)...active stat… | column | Enumeration | .1.3.6.1.4.1.1991.1.2.7.2.1.1.8 |
| snFsrpIfKeepAliveTime The heart-beat is from 1 to 120 seconds. | column | Integer32 | .1.3.6.1.4.1.1991.1.2.7.2.1.1.9 |