snDvmrpReportInterval

FOUNDRY-SN-IP-MIB · .1.3.6.1.4.1.1991.1.2.5.1.5
MIB view Table view

Object

scalar r/w Integer32 
This is the time interval at which the router sends out
full report messages. Value is in number of seconds.
snDvmrpEnable must be 'enabled' before this object is
writen.

Context

MIB
FOUNDRY-SN-IP-MIB
OID
.1.3.6.1.4.1.1991.1.2.5.1.5
Type
scalar
Access
readwrite
Status
current
Parent
snDvmrpMIBObjects
Siblings
16

Syntax

Integer32

Values & Constraints

Object Constraints
range: 10-2000

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
snDvmrpVersion
The router's DVMRP version information.
scalarOctetString.1.3.6.1.4.1.1991.1.2.5.1.1
snDvmrpPruneAge
This is the duration of time for which the prune state is stored. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen.
scalarInteger32.1.3.6.1.4.1.1991.1.2.5.1.10
snDvmrpGraftRetransmitTime
This is the time interval after which a graft message will be retransmitted if graft acknowledge message has not been received. Value is in number of seconds. snDvmrpEnable must b…
scalarInteger32.1.3.6.1.4.1.1991.1.2.5.1.11
snDvmrpDefaultRoute
This is the IP address of a router that is connected to one of the directly attached subnet. If a multicast route is not present on the local router, this default route will be us…
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.1991.1.2.5.1.12
snDvmrpVInterfaceTable
The (conceptual) table listing the router's DVMRP virtual interfaces. snDvmrpEnable must be 'enabled' before this table is read or writen.
table-.1.3.6.1.4.1.1991.1.2.5.1.13
snDvmrpNeighborTable
The (conceptual) table listing the router's DVMRP neighbors, as discovered by receiving Neighbor Probe messages. snDvmrpEnable must be 'enabled' before this table is read.
table-.1.3.6.1.4.1.1991.1.2.5.1.14
snDvmrpRouteTable
The routing table used by DVMRP in place of the unicast routing table. snDvmrpEnable must be 'enabled' before this table is read.
table-.1.3.6.1.4.1.1991.1.2.5.1.15
snDvmrpRouteNextHopTable
The (conceptual) table containing information on the next hops on outgoing interfaces for routing IP multicast datagrams. snDvmrpEnable must be 'enabled' before this table is read.
table-.1.3.6.1.4.1.1991.1.2.5.1.16
snDvmrpVIfStatTable
The (conceptual) table listing the router's DVMRP virtual interface statistical counters. snDvmrpEnable must be 'enabled' before this table is read.
table-.1.3.6.1.4.1.1991.1.2.5.1.17
snDvmrpEnable
Enable or disable DVMRP on this router.
scalarRtrStatus.1.3.6.1.4.1.1991.1.2.5.1.2
snDvmrpGenerationId
The generation identifier for the routing process. This is used by neighboring routers to detect whether pruning information should be resent.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.1991.1.2.5.1.3
snDvmrpProbeInterval
This is the time interval at which the router sends out probe messages to discover neighbour routers. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this ob…
scalarInteger32.1.3.6.1.4.1.1991.1.2.5.1.4
snDvmrpTriggerInterval
This is the time interval at which triggered updates are sent out. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen.
scalarInteger32.1.3.6.1.4.1.1991.1.2.5.1.6
snDvmrpNeighborRouterTimeout
This is the time interval after which the neighbour router is considered down. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen.
scalarInteger32.1.3.6.1.4.1.1991.1.2.5.1.7
snDvmrpRouteExpireTime
This is the time interval after which the route expires and becomes unreachable. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen.
scalarInteger32.1.3.6.1.4.1.1991.1.2.5.1.8
snDvmrpRouteDiscardTime
This is the time interval after which a route is discarded from the route table. Value is in number of seconds. snDvmrpEnable must be 'enabled' before this object is writen.
scalarInteger32.1.3.6.1.4.1.1991.1.2.5.1.9