snAgAclTos

FOUNDRY-SN-IP-ACL-MIB · .1.3.6.1.4.1.1991.1.2.2.15.2.1.17
MIB view Table view

Object

column r/w TosValue 
This refers to the IP type of service value in range <0-15>, which is
the sum of numeric vlaues of the following options -
match packets with maximum reliability TOS (2)
match packets with maximum throughput TOS (4)
match packets with minimum delay (8)
match packets with minimum monetary cost TOS (1)
match packets with normal TOS  (0)

Context

MIB
FOUNDRY-SN-IP-ACL-MIB
OID
.1.3.6.1.4.1.1991.1.2.2.15.2.1.17
Type
column
Access
readwrite
Status
current
Parent
snAgAclEntry
Table
snAgAclTable
Siblings
32

Syntax

TosValue
Source
TosValue
Base type
Enumeration

Values & Constraints

Type Values
0normal
1minMonetaryCost
2maxReliability
3tosValue3
4maxThroughput
5tosValue5
6tosValue6
7tosValue7
8minDelay
9tosValue9
10tosValue10
11tosValue11
12tosValue12
13tosValue13
14tosValue14
15tosValue15
16undefined

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
snAgAclIndex
The Access control list item number for an entry. This is a unique number that identifies different Access list entries combined with the Access list name and Access list number. …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1991.1.2.2.15.2.1.1
snAgAclSourceOperand2
For now this only refers to transport protocol port number. Used in ICMP Protocol to convey the ICMP Type value. 0 means NA. Valid values for ICMP Type: 1 = Echo reply 4 = Destina…
columnInteger32.1.3.6.1.4.1.1991.1.2.2.15.2.1.10
snAgAclDestinationIp
Destination IP address.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1991.1.2.2.15.2.1.11
snAgAclDestinationMask
Destination IP subnet mask.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1991.1.2.2.15.2.1.12
snAgAclDestinationOperator
Type of comparison to perform. For now, this only applys to tcp or udp to compare the port number
columnOperator.1.3.6.1.4.1.1991.1.2.2.15.2.1.13
snAgAclDestinationOperand1
For now this only refers to transport protocol port number. 0 means NA
columnInteger32.1.3.6.1.4.1.1991.1.2.2.15.2.1.14
snAgAclDestinationOperand2
For now this only refers to transport protocol port number. 0 means NA
columnInteger32.1.3.6.1.4.1.1991.1.2.2.15.2.1.15
snAgAclPrecedence
This refers to IP precedence value in the range <0-7> critical(5), flash(3), flash-override(4), immediate(2), internet(6), network(7), priority(1), routine(0)
columnPrecedenceValue.1.3.6.1.4.1.1991.1.2.2.15.2.1.16
snAgAclEstablished
Enable/Disable the filtering of established TCP packets of which the ACK or RESET flag is on. This additional filter only applies to TCP transport protocol.
columnFOUNDRY-SN-IP-MIBRtrStatus.1.3.6.1.4.1.1991.1.2.2.15.2.1.18
snAgAclLogOption
Log flag
columnTruthVal.1.3.6.1.4.1.1991.1.2.2.15.2.1.19
snAgAclNumber
The access-list number for this entry.
columnAclNumber.1.3.6.1.4.1.1991.1.2.2.15.2.1.2
snAgAclStandardFlag
Return whether the ACL is standard or extended, 1 for standard ACL
columnTruthVal.1.3.6.1.4.1.1991.1.2.2.15.2.1.20
snAgAclRowStatus
To create or delete a access list entry.
columnSnRowStatus.1.3.6.1.4.1.1991.1.2.2.15.2.1.21
snAgAclFlowCounter
Approximate count of flows matching individual ACL entry.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.1991.1.2.2.15.2.1.22
snAgAclPacketCounter
Accurate count of packets matching individual ACL entry.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.1991.1.2.2.15.2.1.23
snAgAclComments
Remark description of individual ACL entry.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1991.1.2.2.15.2.1.24
snAgAclIpPriority
QoS priority option for IP ACL entry.
columnInteger32.1.3.6.1.4.1.1991.1.2.2.15.2.1.25
snAgAclPriorityForce
Force packet outgoing priority. Not defined(4)
columnInteger32.1.3.6.1.4.1.1991.1.2.2.15.2.1.26
snAgAclPriorityMapping
Map incoming packet priority. Not defined(8)
columnInteger32.1.3.6.1.4.1.1991.1.2.2.15.2.1.27
snAgAclDscpMarking
Mark packets with given DSCP value. Not defined(64)
columnInteger32.1.3.6.1.4.1.1991.1.2.2.15.2.1.28
snAgAclDscpMapping
Map incoming DSCP value. Not defined(64)
columnInteger32.1.3.6.1.4.1.1991.1.2.2.15.2.1.29
snAgAclName
ACL name for an entry.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1991.1.2.2.15.2.1.3
snAgAclIcmpCode
ICMP Message Code value. Used in combination with ICMP Message Type (use snAgAclSourceOperand2) to setup an ICMP filter. This object is not used with any other protocol. 0 means N…
columnInteger32.1.3.6.1.4.1.1991.1.2.2.15.2.1.30
snAgAclParameters
This mask represents multiple parameters configured for this ACL. Bit 0 specified in the BITS construct is the MS bit of the first octet. Bit 0: Match fragmented IP packets Bit 1:…
columnBits.1.3.6.1.4.1.1991.1.2.2.15.2.1.31
snAgAclVlanId
Optional VLAN ID to match against that of the incoming packet. By default, the VLAN ID field is ignored during the match. In this case, value 0 is returned.
columnFOUNDRY-SN-SWITCH-GROUP-MIBFdryVlanIdOrNoneTC.1.3.6.1.4.1.1991.1.2.2.15.2.1.32
snAgAclClauseString
Returns the equivalent filter clause string.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1991.1.2.2.15.2.1.33
snAgAclAction
Action to take if the ip packet matches with this access control list.
columnAction.1.3.6.1.4.1.1991.1.2.2.15.2.1.4
snAgAclProtocol
Transport protocol. Valid values for the IP protocol are: 0 = any IP protocol 1 = ICMP 2 = IGMP 3 = ggp 4 = ipencap 5 = st2 6 = TCP 7 = cbt 8 = egp 9 = igp 10 = bbn_rcc 11 = nvp 1…
columnIpProtocol.1.3.6.1.4.1.1991.1.2.2.15.2.1.5
snAgAclSourceIp
Source IP address.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1991.1.2.2.15.2.1.6
snAgAclSourceMask
Source IP subnet mask.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1991.1.2.2.15.2.1.7
snAgAclSourceOperator
Type of comparison to perform. For now, this only applys to tcp or udp to compare the port number
columnOperator.1.3.6.1.4.1.1991.1.2.2.15.2.1.8
snAgAclSourceOperand1
For now this only refers to transport protocol port number. 0 means NA
columnInteger32.1.3.6.1.4.1.1991.1.2.2.15.2.1.9