snAgAclPrecedence
FOUNDRY-SN-IP-ACL-MIB ·
.1.3.6.1.4.1.1991.1.2.2.15.2.1.16
Object
column
r/w
PrecedenceValue
This refers to IP precedence value in the range <0-7> critical(5), flash(3), flash-override(4), immediate(2), internet(6), network(7), priority(1), routine(0)
Context
- MIB
- FOUNDRY-SN-IP-ACL-MIB
- OID
.1.3.6.1.4.1.1991.1.2.2.15.2.1.16- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- snAgAclEntry
- Table
- snAgAclTable
- Siblings
- 32
Syntax
PrecedenceValue
- Source
- PrecedenceValue
- Base type
Enumeration
Values & Constraints
Type Values
0 | routine |
1 | priority |
2 | immediate |
3 | flash |
4 | flashoverride |
5 | critical |
6 | internet |
7 | network |
8 | undefined |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| snAgAclIndex The Access control list item number for an entry. This is a unique
number that identifies different Access list entries combined with
the Access list name and Access list number. … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.2.2.15.2.1.1 |
| snAgAclSourceOperand2 For now this only refers to transport protocol port number.
Used in ICMP Protocol to convey the ICMP Type
value. 0 means NA.
Valid values for ICMP Type:
1 = Echo reply
4 = Destina… | column | Integer32 | .1.3.6.1.4.1.1991.1.2.2.15.2.1.10 |
| snAgAclDestinationIp Destination IP address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1991.1.2.2.15.2.1.11 |
| snAgAclDestinationMask Destination IP subnet mask. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1991.1.2.2.15.2.1.12 |
| snAgAclDestinationOperator Type of comparison to perform. For now, this only applys to tcp or udp
to compare the port number | column | Operator | .1.3.6.1.4.1.1991.1.2.2.15.2.1.13 |
| snAgAclDestinationOperand1 For now this only refers to transport protocol port number. 0 means NA | column | Integer32 | .1.3.6.1.4.1.1991.1.2.2.15.2.1.14 |
| snAgAclDestinationOperand2 For now this only refers to transport protocol port number. 0 means NA | column | Integer32 | .1.3.6.1.4.1.1991.1.2.2.15.2.1.15 |
| snAgAclTos This refers to the IP type of service value in range <0-15>, which is
the sum of numeric vlaues of the following options -
match packets with maximum reliability TOS (2)
match pac… | column | TosValue | .1.3.6.1.4.1.1991.1.2.2.15.2.1.17 |
| snAgAclEstablished Enable/Disable the filtering of established TCP packets of which the
ACK or RESET flag is on. This additional filter only applies to TCP
transport protocol. | column | FOUNDRY-SN-IP-MIBRtrStatus | .1.3.6.1.4.1.1991.1.2.2.15.2.1.18 |
| snAgAclLogOption Log flag | column | TruthVal | .1.3.6.1.4.1.1991.1.2.2.15.2.1.19 |
| snAgAclNumber The access-list number for this entry. | column | AclNumber | .1.3.6.1.4.1.1991.1.2.2.15.2.1.2 |
| snAgAclStandardFlag Return whether the ACL is standard or extended, 1 for standard ACL | column | TruthVal | .1.3.6.1.4.1.1991.1.2.2.15.2.1.20 |
| snAgAclRowStatus To create or delete a access list entry. | column | SnRowStatus | .1.3.6.1.4.1.1991.1.2.2.15.2.1.21 |
| snAgAclFlowCounter Approximate count of flows matching individual ACL entry. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.1991.1.2.2.15.2.1.22 |
| snAgAclPacketCounter Accurate count of packets matching individual ACL entry. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.1991.1.2.2.15.2.1.23 |
| snAgAclComments Remark description of individual ACL entry. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1991.1.2.2.15.2.1.24 |
| snAgAclIpPriority QoS priority option for IP ACL entry. | column | Integer32 | .1.3.6.1.4.1.1991.1.2.2.15.2.1.25 |
| snAgAclPriorityForce Force packet outgoing priority. Not defined(4) | column | Integer32 | .1.3.6.1.4.1.1991.1.2.2.15.2.1.26 |
| snAgAclPriorityMapping Map incoming packet priority. Not defined(8) | column | Integer32 | .1.3.6.1.4.1.1991.1.2.2.15.2.1.27 |
| snAgAclDscpMarking Mark packets with given DSCP value. Not defined(64) | column | Integer32 | .1.3.6.1.4.1.1991.1.2.2.15.2.1.28 |
| snAgAclDscpMapping Map incoming DSCP value. Not defined(64) | column | Integer32 | .1.3.6.1.4.1.1991.1.2.2.15.2.1.29 |
| snAgAclName ACL name for an entry. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1991.1.2.2.15.2.1.3 |
| snAgAclIcmpCode ICMP Message Code value. Used in combination with
ICMP Message Type (use snAgAclSourceOperand2) to
setup an ICMP filter. This object is not used with any
other protocol. 0 means N… | column | Integer32 | .1.3.6.1.4.1.1991.1.2.2.15.2.1.30 |
| snAgAclParameters This mask represents multiple parameters configured for this ACL.
Bit 0 specified in the BITS construct is the MS bit of the first octet.
Bit 0: Match fragmented IP packets
Bit 1:… | column | Bits | .1.3.6.1.4.1.1991.1.2.2.15.2.1.31 |
| snAgAclVlanId Optional VLAN ID to match against that of the incoming packet.
By default, the VLAN ID field is ignored during the match. In this case,
value 0 is returned. | column | FOUNDRY-SN-SWITCH-GROUP-MIBFdryVlanIdOrNoneTC | .1.3.6.1.4.1.1991.1.2.2.15.2.1.32 |
| snAgAclClauseString Returns the equivalent filter clause string. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1991.1.2.2.15.2.1.33 |
| snAgAclAction Action to take if the ip packet matches with this access control list. | column | Action | .1.3.6.1.4.1.1991.1.2.2.15.2.1.4 |
| snAgAclProtocol Transport protocol. Valid values for the IP protocol are:
0 = any IP protocol
1 = ICMP
2 = IGMP
3 = ggp
4 = ipencap
5 = st2
6 = TCP
7 = cbt
8 = egp
9 = igp
10 = bbn_rcc
11 = nvp
1… | column | IpProtocol | .1.3.6.1.4.1.1991.1.2.2.15.2.1.5 |
| snAgAclSourceIp Source IP address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1991.1.2.2.15.2.1.6 |
| snAgAclSourceMask Source IP subnet mask. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1991.1.2.2.15.2.1.7 |
| snAgAclSourceOperator Type of comparison to perform. For now, this only applys to tcp or udp
to compare the port number | column | Operator | .1.3.6.1.4.1.1991.1.2.2.15.2.1.8 |
| snAgAclSourceOperand1 For now this only refers to transport protocol port number. 0 means NA | column | Integer32 | .1.3.6.1.4.1.1991.1.2.2.15.2.1.9 |