fdryL2AclEthernetType
FOUNDRY-SN-IP-ACL-MIB ·
.1.3.6.1.4.1.1991.1.2.2.15.7.1.9
Object
column
r/w
FdryEnetTypeOrZeroTC
Optional Ethernet Type to match against the etype field of the incoming packet. By default, etype field is ignored during the match.
Context
- MIB
- FOUNDRY-SN-IP-ACL-MIB
- OID
.1.3.6.1.4.1.1991.1.2.2.15.7.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fdryL2AclEntry
- Table
- fdryL2AclTable
- Siblings
- 14
Syntax
FdryEnetTypeOrZeroTC
- Source
- FdryEnetTypeOrZeroTC
- Base type
Enumeration
Values & Constraints
Type Values
0 | invalid |
1 | ipv4 |
2 | arp |
3 | ipv6 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fdryL2AclNumber The access-list number for this entry.
For L2ACL, the valid values are between 400 and 599. | column | AclNumber | .1.3.6.1.4.1.1991.1.2.2.15.7.1.1 |
| fdryL2AclDot1pPriority The priority option assigns traffic that matches the ACL to a
hardware forwarding queue. In addition to changing the internal
forwarding priority, if the outgoing interface is an … | column | FOUNDRY-SN-SWITCH-GROUP-MIBPortQosTC | .1.3.6.1.4.1.1991.1.2.2.15.7.1.10 |
| fdryL2AclDot1pPriorityForce The priority-force option assigns packets of outgoing traffic
that match the ACL to a specific hardware forwarding queue,
even though the incoming packet may be assigned to anothe… | column | FOUNDRY-SN-SWITCH-GROUP-MIBPortQosTC | .1.3.6.1.4.1.1991.1.2.2.15.7.1.11 |
| fdryL2AclDot1pPriorityMapping The priority-mapping option matches on the packets 802.1p value.
This option does not change the packets forwarding priority through
the device or mark the packet. This keyword is… | column | FOUNDRY-SN-SWITCH-GROUP-MIBPortQosTC | .1.3.6.1.4.1.1991.1.2.2.15.7.1.12 |
| fdryL2AclMirrorPackets Mirror packets matching ACL permit clause. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1991.1.2.2.15.7.1.13 |
| fdryL2AclLogEnable Optional parameter to enable logging only when deny clause
is specified. Note that traffic denied by implicit deny mechanism is not
subject to logging. The implicit deny kicks in … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1991.1.2.2.15.7.1.14 |
| fdryL2AclRowStatus The row status variable, used according to installation
and removal conventions for conceptual rows. Setting this
object to active(1) or createAndGo(4) results in the
addition of … | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.1991.1.2.2.15.7.1.15 |
| fdryL2AclClauseIndex The index of the clause within a given ACL number.
During row creation, the clause index value should match
with the next available clause index for a given ACL number.
It is advi… | column | FdryClauseIndexTC | .1.3.6.1.4.1.1991.1.2.2.15.7.1.2 |
| fdryL2AclAction Action to take if the ingress L2 packet matches this ACL. | column | Action | .1.3.6.1.4.1.1991.1.2.2.15.7.1.3 |
| fdryL2AclSourceMac Optional Source MAC address. By default, it matches with
any source MAC within a packet. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.1991.1.2.2.15.7.1.4 |
| fdryL2AclSourceMacMask Optional Source MAC address mask.
For Set operation, this object can only be used in
conjunction with fdryL2AclSourceMac.
By default, it matches with any source MAC within a pack… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.1991.1.2.2.15.7.1.5 |
| fdryL2AclDestinationMac Optional destination MAC address.
By default, it matches with any destination MAC within a packet. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.1991.1.2.2.15.7.1.6 |
| fdryL2AclDestinationMacMask Optional destination MAC address mask.
For Set operation, this object can only be used in
conjunction with fdryL2AclDestinationMac.
By default, it matches with any destination MAC… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.1991.1.2.2.15.7.1.7 |
| fdryL2AclVlanId Optional VLAN ID to match against that of the incoming packet.
By default, the VLAN ID field is ignored during the match. In this case,
value 0 is returned. | column | FOUNDRY-SN-SWITCH-GROUP-MIBFdryVlanIdOrNoneTC | .1.3.6.1.4.1.1991.1.2.2.15.7.1.8 |