fdryL2AclDot1pPriorityMapping

FOUNDRY-SN-IP-ACL-MIB · .1.3.6.1.4.1.1991.1.2.2.15.7.1.12
MIB view Table view

Object

column r/w FOUNDRY-SN-SWITCH-GROUP-MIBPortQosTC 
The priority-mapping option matches on the packets 802.1p value.
This option does not change the packets forwarding priority through
the device or mark the packet. This keyword is applicable for both
inbound and outbound ACLs.
   This object is not supported in RX, where it always returns
enum value invalid.

Context

MIB
FOUNDRY-SN-IP-ACL-MIB
OID
.1.3.6.1.4.1.1991.1.2.2.15.7.1.12
Type
column
Access
readwrite
Status
current
Parent
fdryL2AclEntry
Table
fdryL2AclTable
Siblings
14

Syntax

FOUNDRY-SN-SWITCH-GROUP-MIBPortQosTC
Source
FOUNDRY-SN-SWITCH-GROUP-MIBPortQosTC
Base type
Enumeration

Values & Constraints

Type Values
0level0
1level1
2level2
3level3
4level4
5level5
6level6
7level7
127invalid

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fdryL2AclNumber
The access-list number for this entry. For L2ACL, the valid values are between 400 and 599.
columnAclNumber.1.3.6.1.4.1.1991.1.2.2.15.7.1.1
fdryL2AclDot1pPriority
The priority option assigns traffic that matches the ACL to a hardware forwarding queue. In addition to changing the internal forwarding priority, if the outgoing interface is an …
columnFOUNDRY-SN-SWITCH-GROUP-MIBPortQosTC.1.3.6.1.4.1.1991.1.2.2.15.7.1.10
fdryL2AclDot1pPriorityForce
The priority-force option assigns packets of outgoing traffic that match the ACL to a specific hardware forwarding queue, even though the incoming packet may be assigned to anothe…
columnFOUNDRY-SN-SWITCH-GROUP-MIBPortQosTC.1.3.6.1.4.1.1991.1.2.2.15.7.1.11
fdryL2AclMirrorPackets
Mirror packets matching ACL permit clause.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.1991.1.2.2.15.7.1.13
fdryL2AclLogEnable
Optional parameter to enable logging only when deny clause is specified. Note that traffic denied by implicit deny mechanism is not subject to logging. The implicit deny kicks in …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.1991.1.2.2.15.7.1.14
fdryL2AclRowStatus
The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to active(1) or createAndGo(4) results in the addition of …
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.1991.1.2.2.15.7.1.15
fdryL2AclClauseIndex
The index of the clause within a given ACL number. During row creation, the clause index value should match with the next available clause index for a given ACL number. It is advi…
columnFdryClauseIndexTC.1.3.6.1.4.1.1991.1.2.2.15.7.1.2
fdryL2AclAction
Action to take if the ingress L2 packet matches this ACL.
columnAction.1.3.6.1.4.1.1991.1.2.2.15.7.1.3
fdryL2AclSourceMac
Optional Source MAC address. By default, it matches with any source MAC within a packet.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.1991.1.2.2.15.7.1.4
fdryL2AclSourceMacMask
Optional Source MAC address mask. For Set operation, this object can only be used in conjunction with fdryL2AclSourceMac. By default, it matches with any source MAC within a pack…
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.1991.1.2.2.15.7.1.5
fdryL2AclDestinationMac
Optional destination MAC address. By default, it matches with any destination MAC within a packet.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.1991.1.2.2.15.7.1.6
fdryL2AclDestinationMacMask
Optional destination MAC address mask. For Set operation, this object can only be used in conjunction with fdryL2AclDestinationMac. By default, it matches with any destination MAC…
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.1991.1.2.2.15.7.1.7
fdryL2AclVlanId
Optional VLAN ID to match against that of the incoming packet. By default, the VLAN ID field is ignored during the match. In this case, value 0 is returned.
columnFOUNDRY-SN-SWITCH-GROUP-MIBFdryVlanIdOrNoneTC.1.3.6.1.4.1.1991.1.2.2.15.7.1.8
fdryL2AclEthernetType
Optional Ethernet Type to match against the etype field of the incoming packet. By default, etype field is ignored during the match.
columnFdryEnetTypeOrZeroTC.1.3.6.1.4.1.1991.1.2.2.15.7.1.9