fdryL2AclDestinationMacMask

FOUNDRY-SN-IP-ACL-MIB · .1.3.6.1.4.1.1991.1.2.2.15.7.1.7
MIB view Table view

Object

column r/w SNMPv2-TCMacAddress 
Optional destination MAC address mask.
For Set operation, this object can only be used in
conjunction with fdryL2AclDestinationMac.
By default, it matches with any destination MAC within a packet.
To match on the first two bytes of the address
aabb.ccdd.eeff, use the mask ffff.0000.0000. In this case,
the clause matches all destination MAC addresses that contain
'aabb' as the first two bytes and any values in the
remaining bytes of the MAC address.

Context

MIB
FOUNDRY-SN-IP-ACL-MIB
OID
.1.3.6.1.4.1.1991.1.2.2.15.7.1.7
Type
column
Access
readwrite
Status
current
Parent
fdryL2AclEntry
Table
fdryL2AclTable
Siblings
14

Syntax

SNMPv2-TCMacAddress
Source
SNMPv2-TCMacAddress
Base type
OctetString

Values & Constraints

Type Constraints
range: 6

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fdryL2AclNumber
The access-list number for this entry. For L2ACL, the valid values are between 400 and 599.
columnAclNumber.1.3.6.1.4.1.1991.1.2.2.15.7.1.1
fdryL2AclDot1pPriority
The priority option assigns traffic that matches the ACL to a hardware forwarding queue. In addition to changing the internal forwarding priority, if the outgoing interface is an …
columnFOUNDRY-SN-SWITCH-GROUP-MIBPortQosTC.1.3.6.1.4.1.1991.1.2.2.15.7.1.10
fdryL2AclDot1pPriorityForce
The priority-force option assigns packets of outgoing traffic that match the ACL to a specific hardware forwarding queue, even though the incoming packet may be assigned to anothe…
columnFOUNDRY-SN-SWITCH-GROUP-MIBPortQosTC.1.3.6.1.4.1.1991.1.2.2.15.7.1.11
fdryL2AclDot1pPriorityMapping
The priority-mapping option matches on the packets 802.1p value. This option does not change the packets forwarding priority through the device or mark the packet. This keyword is…
columnFOUNDRY-SN-SWITCH-GROUP-MIBPortQosTC.1.3.6.1.4.1.1991.1.2.2.15.7.1.12
fdryL2AclMirrorPackets
Mirror packets matching ACL permit clause.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.1991.1.2.2.15.7.1.13
fdryL2AclLogEnable
Optional parameter to enable logging only when deny clause is specified. Note that traffic denied by implicit deny mechanism is not subject to logging. The implicit deny kicks in …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.1991.1.2.2.15.7.1.14
fdryL2AclRowStatus
The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to active(1) or createAndGo(4) results in the addition of …
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.1991.1.2.2.15.7.1.15
fdryL2AclClauseIndex
The index of the clause within a given ACL number. During row creation, the clause index value should match with the next available clause index for a given ACL number. It is advi…
columnFdryClauseIndexTC.1.3.6.1.4.1.1991.1.2.2.15.7.1.2
fdryL2AclAction
Action to take if the ingress L2 packet matches this ACL.
columnAction.1.3.6.1.4.1.1991.1.2.2.15.7.1.3
fdryL2AclSourceMac
Optional Source MAC address. By default, it matches with any source MAC within a packet.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.1991.1.2.2.15.7.1.4
fdryL2AclSourceMacMask
Optional Source MAC address mask. For Set operation, this object can only be used in conjunction with fdryL2AclSourceMac. By default, it matches with any source MAC within a pack…
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.1991.1.2.2.15.7.1.5
fdryL2AclDestinationMac
Optional destination MAC address. By default, it matches with any destination MAC within a packet.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.1991.1.2.2.15.7.1.6
fdryL2AclVlanId
Optional VLAN ID to match against that of the incoming packet. By default, the VLAN ID field is ignored during the match. In this case, value 0 is returned.
columnFOUNDRY-SN-SWITCH-GROUP-MIBFdryVlanIdOrNoneTC.1.3.6.1.4.1.1991.1.2.2.15.7.1.8
fdryL2AclEthernetType
Optional Ethernet Type to match against the etype field of the incoming packet. By default, etype field is ignored during the match.
columnFdryEnetTypeOrZeroTC.1.3.6.1.4.1.1991.1.2.2.15.7.1.9