snAgGblIfIpMask
FOUNDRY-SN-AGENT-MIB ·
.1.3.6.1.4.1.1991.1.1.2.1.14
Object
The interface ip address mask.
Context
- MIB
- FOUNDRY-SN-AGENT-MIB
- OID
.1.3.6.1.4.1.1991.1.1.2.1.14- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- snAgentGbl
- Siblings
- 66
Syntax
SNMPv2-SMIIpAddress
- Source
- SNMPv2-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| snAgReload Action object to reboot the agent.
The following values can only be read:
other(1).....agent in unknown or other state
running(2)...agent running
busy(4).......reload not al… | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.2.1.1 |
| snAgDefGwayIp The default gateway (router) address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1991.1.1.2.1.10 |
| snAgImgVer The version of the running software in the form
'major.minor.maintenance[letters]'. | scalar | OctetString | .1.3.6.1.4.1.1991.1.1.2.1.11 |
| snAgFlashImgVer The version of the software image saved in local
storage such as flash memory in the form
'major.minor.maintenance[letters]'. If not
known or not available, then the value is
a ze… | scalar | OctetString | .1.3.6.1.4.1.1991.1.1.2.1.12 |
| snAgGblIfIpAddr The interface ip address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1991.1.1.2.1.13 |
| snAgGblPassword System Security Access Password and this is only
allowed to use for setting but not for reading.
An SNMP-Get will get an null string.
By default, this object needs to be in t… | scalar | OctetString | .1.3.6.1.4.1.1991.1.1.2.1.15 |
| snAgTrpRcvrCurEntry The current total entries of the Trap
Receiver Table are created. | scalar | Integer32 | .1.3.6.1.4.1.1991.1.1.2.1.16 |
| snAgGblDataRetrieveMode By default, this mode is set to nextbootCfg(0).
The VLAN Table and Port-STP Table data will be retrieved
according to this mode.
nextbootCfg(0).........the nextboot configuration … | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.2.1.19 |
| snAgEraseNVRAM Action object to erase NVRAM of the agent.
The following values can only be read:
normal(1)
error(2)... operation failed or bad flash
erasing(4)...agent is erasing NVRAM fla… | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.2.1.2 |
| snAgSystemLog The system log object to indicate whether any Network
Management Station(NMS) has login. The first byte
of the octet string is the value decribed below and
followed by 4 bytes o… | scalar | OctetString | .1.3.6.1.4.1.1991.1.1.2.1.20 |
| snAgGblEnableColdStartTrap Indicates whether the SNMP agent process is
permitted to generate cold start traps. | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.2.1.21 |
| snAgGblEnableLinkUpTrap Indicates whether the SNMP agent process is
permitted to generate link up traps. | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.2.1.22 |
| snAgGblEnableLinkDownTrap Indicates whether the SNMP agent process is
permitted to generate link down traps. | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.2.1.23 |
| snAgGblPasswordChangeMode Specify which management entity is allowed to change
the password. 'anyMgmtEntity' management entities are
SNMP management station, console command line interface,
and telnet comm… | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.2.1.24 |
| snAgGblReadOnlyCommunity SNMP read community string and this is only allowed
to use for setting but not for reading. An SNMP-Get
will get an zero length string.
Set operation on this object is allowed o… | scalar | OctetString | .1.3.6.1.4.1.1991.1.1.2.1.25 |
| snAgGblReadWriteCommunity SNMP read-write community string and this is only
allowed to use for setting but not for reading. An
SNMP-Get will get an zero length string.
Set operation on this object is all… | scalar | OctetString | .1.3.6.1.4.1.1991.1.1.2.1.26 |
| snAgGblCurrentSecurityLevel This represnts the current log-in security level.
Each level of security requires a password to permit
user for different system configurations. | scalar | Integer32 | .1.3.6.1.4.1.1991.1.1.2.1.27 |
| snAgGblSecurityLevelSet This shows which the security level password to be set. | scalar | Integer32 | .1.3.6.1.4.1.1991.1.1.2.1.28 |
| snAgGblLevelPasswordsMask This shows the bitmap of level passwords which successfully assigned to the system. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.2.1.29 |
| snAgWriteNVRAM Action object to save all configuration info to
NVRAM of the agent.
The following values can only be read:
normal(1)
error(2)... operation failed or bad flash
writing(4)...agen… | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.2.1.3 |
| snAgGblQueueOverflow false - The device queues are not overflow.
true - The device queues are overflow. | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.2.1.30 |
| snAgGblBufferShortage false - The device buffers are adequate.
true - The device buffers are in shortage. | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.2.1.31 |
| snAgGblDmaFailure false - The device DMAs are in good condition.
true - One of the DMAs in the device fails. | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.2.1.32 |
| snAgGblResourceLowWarning false - No, the device does not have resource-low-warning.
true - Yes, the device does have resource-low-warning. | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.2.1.33 |
| snAgGblExcessiveErrorWarning false - No, the device does not have any excessive collision, FCS errors, alignment warning etc.
true - Yes, the device does have. | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.2.1.34 |
| snAgGblCpuUtilData The statistics collection of utilization of the CPU in the device. Reading this object resets all the counters. Therefore, a user need not set snAgGblUtilCollect. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.1991.1.1.2.1.35 |
| snAgGblCpuUtilCollect deprecated enable(1) - The beginning of statistics collection of utilization of the CPU in the device.
disable(0) - The end of statistics collection of utilization of the CPU in the device.… | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.2.1.36 |
| snAgGblTelnetTimeout Telnet session idling timeout value. Writing value 0 to
this object never timeouts any telnet sessions. Each value
unit is one minute. | scalar | Integer32 | .1.3.6.1.4.1.1991.1.1.2.1.37 |
| snAgGblEnableWebMgmt Enable/disable web management. | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.2.1.38 |
| snAgGblSecurityLevelBinding This represnts the binding of a given password to which
security level. A value of 255 indicates an invalid
binding. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.2.1.39 |
| snAgConfigFromNVRAM Action object to config the switch from NVRAM of the agent.
The following values can only be read:
normal(1)
error(2)... operation failed or bad flash
configing(4)...configi… | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.2.1.4 |
| snAgGblEnableSLB Enable/disable Server Load Balancing. | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.2.1.40 |
| snAgSoftwareFeature A bit string representing the software feature of the running
switch/router image. These features were conditional compiled
to different product images. For each bit, exist featur… | scalar | OctetString | .1.3.6.1.4.1.1991.1.1.2.1.41 |
| snAgGblEnableModuleInsertedTrap Indicates whether the SNMP agent process is permitted to
generate hardware module inserted to chassis traps. | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.2.1.42 |
| snAgGblEnableModuleRemovedTrap Indicates whether the SNMP agent process is permitted to
generate hardware module removed from chassis traps. | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.2.1.43 |
| snAgGblTrapMessage A generic trap message string. | scalar | DisplayString | .1.3.6.1.4.1.1991.1.1.2.1.44 |
| snAgGblEnableTelnetServer Enable or disable telnet server in device. | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.2.1.45 |
| snAgGblTelnetPassword Telnet Access Password and this is only
useful for write operation. A read operation
get a null string.
Set operation on this object is allowed only if command
'password-change … | scalar | OctetString | .1.3.6.1.4.1.1991.1.1.2.1.46 |
| snAgBuildDate The date of the built software. | scalar | OctetString | .1.3.6.1.4.1.1991.1.1.2.1.47 |
| snAgBuildtime The time of the built software. | scalar | OctetString | .1.3.6.1.4.1.1991.1.1.2.1.48 |
| snAgBuildVer The version of the built software in the form
'major.minor.maintenance[letters]'. | scalar | OctetString | .1.3.6.1.4.1.1991.1.1.2.1.49 |
| snAgTftpServerIp deprecated The tftp server address, this will be used for both download/upload
image file and config file. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1991.1.1.2.1.5 |
| snAgGblCpuUtil1SecAvg The statistics collection of 1 second CPU utilization. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.1991.1.1.2.1.50 |
| snAgGblCpuUtil5SecAvg The statistics collection of 5 second CPU utilization. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.1991.1.1.2.1.51 |
| snAgGblCpuUtil1MinAvg The statistics collection of 1 minute CPU utilization. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.1991.1.1.2.1.52 |
| snAgGblDynMemUtil deprecated The system dynamic memory utilization, in unit of percentage.
Deprecated: Refer to snAgSystemDRAMUtil | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.1991.1.1.2.1.53 |
| snAgGblDynMemTotal deprecated The total amount of system dynamic memory, in number of bytes.
Deprecated: Refer to snAgSystemDRAMTotal | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.1991.1.1.2.1.54 |
| snAgGblDynMemFree deprecated The free amount of system dynamic memory, in number of bytes.
Deprecated: Refer to snAgSystemDRAMFree | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.1991.1.1.2.1.55 |
| snAgImgLoadSPModuleType The switch processor module type of which that receives
the downloaded image. | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.2.1.56 |
| snAgImgLoadSPModuleNumber The slot numner of a switch processor module that receives
the downloaded image. Setting value 0 applies to all SP
modules. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.2.1.57 |
| snAgTrapHoldTime The time in seconds for which traps will be witheld
during system initialization. | scalar | Integer32 | .1.3.6.1.4.1.1991.1.1.2.1.58 |
| snAgSFlowSourceInterface Use the ifIndex value here to specify the
source interface to be used for sFlow packets.
The interface should have IP address configured
on it. Value of 0 indicates that source in… | scalar | IF-MIBInterfaceIndex | .1.3.6.1.4.1.1991.1.1.2.1.59 |
| snAgImgFname Name of the image file including path currently associated
with the system. When the object is not used, the value is a
zero length string. | scalar | OctetString | .1.3.6.1.4.1.1991.1.1.2.1.6 |
| snAgGblTelnetLoginTimeout Telnet session login timeout value in minutes. Default is 2 minutes. | scalar | Integer32 | .1.3.6.1.4.1.1991.1.1.2.1.60 |
| snAgGblBannerExec EXEC process creation banner. Insert newlines using '\n' within the string. | scalar | DisplayString | .1.3.6.1.4.1.1991.1.1.2.1.61 |
| snAgGblBannerIncoming Incoming terminal line banner. Insert newlines using '\n' within the string. | scalar | DisplayString | .1.3.6.1.4.1.1991.1.1.2.1.62 |
| snAgGblBannerMotd Message-of-the-day banner. Insert newlines using '\n' within the string. | scalar | DisplayString | .1.3.6.1.4.1.1991.1.1.2.1.63 |
| snAgWebMgmtServerTcpPort The TCP port number of web management interface. | scalar | Integer32 | .1.3.6.1.4.1.1991.1.1.2.1.64 |
| snAgTftpServerAddrType TFTP server IP address Type. Supported address types are ipv4(1) and ipv6(2) | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.1991.1.1.2.1.65 |
| snAgTftpServerAddr TFTP server IP address. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.1991.1.1.2.1.66 |
| snAgGblPasswordCheckMode enabled(1) - The password checking for SNMP set requests is enabled. The default value is enable.
disabled(2) - The password checking for SNMP set requests is disabled.
When en… | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.1991.1.1.2.1.68 |
| snAgGblEnableTelnetAuthentication Enable or disable telnet authentication in device. | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.2.1.69 |
| snAgImgLoad Action object to down/up load a new image
to the agent. The following values:
Error values: from normal(1) to operationError(17) and tftpWrongFileType(23).
loading(18) .. operat… | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.2.1.7 |
| snAgGblManager2FactorAuthentication enabled(1) - The manager two-factor authentication is enabled. Only revSSH access through SZ is allowed
and all incoming SSH sessions to device are closed when two-factor authenti… | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.2.1.70 |
| snAgCfgFname Name of the config file(s) including path currently associated
with the system. Some agents in special
situations may support a value which contains
multiple file names instead of… | scalar | OctetString | .1.3.6.1.4.1.1991.1.1.2.1.8 |
| snAgCfgLoad Action object to down/up load a config image
to the agent. The following values can be
read :
Error values: from normal(1) to operationError(17) and tftpWrongFileType(29).
loadi… | scalar | Enumeration | .1.3.6.1.4.1.1991.1.1.2.1.9 |