snAgGblDynMemFree

FOUNDRY-SN-AGENT-MIB · .1.3.6.1.4.1.1991.1.1.2.1.55
MIB view Table view

Object

scalar deprecated SNMPv2-SMIGauge32 
The free amount of system dynamic memory, in number of bytes.
Deprecated: Refer to snAgSystemDRAMFree

Context

MIB
FOUNDRY-SN-AGENT-MIB
OID
.1.3.6.1.4.1.1991.1.1.2.1.55
Type
scalar
Access
readonly
Status
deprecated
Parent
snAgentGbl
Siblings
66

Syntax

SNMPv2-SMIGauge32
Source
SNMPv2-SMIGauge32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
snAgReload
Action object to reboot the agent. The following values can only be read: other(1).....agent in unknown or other state running(2)...agent running busy(4).......reload not al…
scalarEnumeration.1.3.6.1.4.1.1991.1.1.2.1.1
snAgDefGwayIp
The default gateway (router) address.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.1991.1.1.2.1.10
snAgImgVer
The version of the running software in the form 'major.minor.maintenance[letters]'.
scalarOctetString.1.3.6.1.4.1.1991.1.1.2.1.11
snAgFlashImgVer
The version of the software image saved in local storage such as flash memory in the form 'major.minor.maintenance[letters]'. If not known or not available, then the value is a ze…
scalarOctetString.1.3.6.1.4.1.1991.1.1.2.1.12
snAgGblIfIpAddr
The interface ip address.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.1991.1.1.2.1.13
snAgGblIfIpMask
The interface ip address mask.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.1991.1.1.2.1.14
snAgGblPassword
System Security Access Password and this is only allowed to use for setting but not for reading. An SNMP-Get will get an null string. By default, this object needs to be in t…
scalarOctetString.1.3.6.1.4.1.1991.1.1.2.1.15
snAgTrpRcvrCurEntry
The current total entries of the Trap Receiver Table are created.
scalarInteger32.1.3.6.1.4.1.1991.1.1.2.1.16
snAgGblDataRetrieveMode
By default, this mode is set to nextbootCfg(0). The VLAN Table and Port-STP Table data will be retrieved according to this mode. nextbootCfg(0).........the nextboot configuration …
scalarEnumeration.1.3.6.1.4.1.1991.1.1.2.1.19
snAgEraseNVRAM
Action object to erase NVRAM of the agent. The following values can only be read: normal(1) error(2)... operation failed or bad flash erasing(4)...agent is erasing NVRAM fla…
scalarEnumeration.1.3.6.1.4.1.1991.1.1.2.1.2
snAgSystemLog
The system log object to indicate whether any Network Management Station(NMS) has login. The first byte of the octet string is the value decribed below and followed by 4 bytes o…
scalarOctetString.1.3.6.1.4.1.1991.1.1.2.1.20
snAgGblEnableColdStartTrap
Indicates whether the SNMP agent process is permitted to generate cold start traps.
scalarEnumeration.1.3.6.1.4.1.1991.1.1.2.1.21
snAgGblEnableLinkUpTrap
Indicates whether the SNMP agent process is permitted to generate link up traps.
scalarEnumeration.1.3.6.1.4.1.1991.1.1.2.1.22
snAgGblEnableLinkDownTrap
Indicates whether the SNMP agent process is permitted to generate link down traps.
scalarEnumeration.1.3.6.1.4.1.1991.1.1.2.1.23
snAgGblPasswordChangeMode
Specify which management entity is allowed to change the password. 'anyMgmtEntity' management entities are SNMP management station, console command line interface, and telnet comm…
scalarEnumeration.1.3.6.1.4.1.1991.1.1.2.1.24
snAgGblReadOnlyCommunity
SNMP read community string and this is only allowed to use for setting but not for reading. An SNMP-Get will get an zero length string. Set operation on this object is allowed o…
scalarOctetString.1.3.6.1.4.1.1991.1.1.2.1.25
snAgGblReadWriteCommunity
SNMP read-write community string and this is only allowed to use for setting but not for reading. An SNMP-Get will get an zero length string. Set operation on this object is all…
scalarOctetString.1.3.6.1.4.1.1991.1.1.2.1.26
snAgGblCurrentSecurityLevel
This represnts the current log-in security level. Each level of security requires a password to permit user for different system configurations.
scalarInteger32.1.3.6.1.4.1.1991.1.1.2.1.27
snAgGblSecurityLevelSet
This shows which the security level password to be set.
scalarInteger32.1.3.6.1.4.1.1991.1.1.2.1.28
snAgGblLevelPasswordsMask
This shows the bitmap of level passwords which successfully assigned to the system.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.1991.1.1.2.1.29
snAgWriteNVRAM
Action object to save all configuration info to NVRAM of the agent. The following values can only be read: normal(1) error(2)... operation failed or bad flash writing(4)...agen…
scalarEnumeration.1.3.6.1.4.1.1991.1.1.2.1.3
snAgGblQueueOverflow
false - The device queues are not overflow. true - The device queues are overflow.
scalarEnumeration.1.3.6.1.4.1.1991.1.1.2.1.30
snAgGblBufferShortage
false - The device buffers are adequate. true - The device buffers are in shortage.
scalarEnumeration.1.3.6.1.4.1.1991.1.1.2.1.31
snAgGblDmaFailure
false - The device DMAs are in good condition. true - One of the DMAs in the device fails.
scalarEnumeration.1.3.6.1.4.1.1991.1.1.2.1.32
snAgGblResourceLowWarning
false - No, the device does not have resource-low-warning. true - Yes, the device does have resource-low-warning.
scalarEnumeration.1.3.6.1.4.1.1991.1.1.2.1.33
snAgGblExcessiveErrorWarning
false - No, the device does not have any excessive collision, FCS errors, alignment warning etc. true - Yes, the device does have.
scalarEnumeration.1.3.6.1.4.1.1991.1.1.2.1.34
snAgGblCpuUtilData
The statistics collection of utilization of the CPU in the device. Reading this object resets all the counters. Therefore, a user need not set snAgGblUtilCollect.
scalarSNMPv2-SMIGauge32.1.3.6.1.4.1.1991.1.1.2.1.35
snAgGblCpuUtilCollect deprecated
enable(1) - The beginning of statistics collection of utilization of the CPU in the device. disable(0) - The end of statistics collection of utilization of the CPU in the device.…
scalarEnumeration.1.3.6.1.4.1.1991.1.1.2.1.36
snAgGblTelnetTimeout
Telnet session idling timeout value. Writing value 0 to this object never timeouts any telnet sessions. Each value unit is one minute.
scalarInteger32.1.3.6.1.4.1.1991.1.1.2.1.37
snAgGblEnableWebMgmt
Enable/disable web management.
scalarEnumeration.1.3.6.1.4.1.1991.1.1.2.1.38
snAgGblSecurityLevelBinding
This represnts the binding of a given password to which security level. A value of 255 indicates an invalid binding.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.1991.1.1.2.1.39
snAgConfigFromNVRAM
Action object to config the switch from NVRAM of the agent. The following values can only be read: normal(1) error(2)... operation failed or bad flash configing(4)...configi…
scalarEnumeration.1.3.6.1.4.1.1991.1.1.2.1.4
snAgGblEnableSLB
Enable/disable Server Load Balancing.
scalarEnumeration.1.3.6.1.4.1.1991.1.1.2.1.40
snAgSoftwareFeature
A bit string representing the software feature of the running switch/router image. These features were conditional compiled to different product images. For each bit, exist featur…
scalarOctetString.1.3.6.1.4.1.1991.1.1.2.1.41
snAgGblEnableModuleInsertedTrap
Indicates whether the SNMP agent process is permitted to generate hardware module inserted to chassis traps.
scalarEnumeration.1.3.6.1.4.1.1991.1.1.2.1.42
snAgGblEnableModuleRemovedTrap
Indicates whether the SNMP agent process is permitted to generate hardware module removed from chassis traps.
scalarEnumeration.1.3.6.1.4.1.1991.1.1.2.1.43
snAgGblTrapMessage
A generic trap message string.
scalarDisplayString.1.3.6.1.4.1.1991.1.1.2.1.44
snAgGblEnableTelnetServer
Enable or disable telnet server in device.
scalarEnumeration.1.3.6.1.4.1.1991.1.1.2.1.45
snAgGblTelnetPassword
Telnet Access Password and this is only useful for write operation. A read operation get a null string. Set operation on this object is allowed only if command 'password-change …
scalarOctetString.1.3.6.1.4.1.1991.1.1.2.1.46
snAgBuildDate
The date of the built software.
scalarOctetString.1.3.6.1.4.1.1991.1.1.2.1.47
snAgBuildtime
The time of the built software.
scalarOctetString.1.3.6.1.4.1.1991.1.1.2.1.48
snAgBuildVer
The version of the built software in the form 'major.minor.maintenance[letters]'.
scalarOctetString.1.3.6.1.4.1.1991.1.1.2.1.49
snAgTftpServerIp deprecated
The tftp server address, this will be used for both download/upload image file and config file.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.1991.1.1.2.1.5
snAgGblCpuUtil1SecAvg
The statistics collection of 1 second CPU utilization.
scalarSNMPv2-SMIGauge32.1.3.6.1.4.1.1991.1.1.2.1.50
snAgGblCpuUtil5SecAvg
The statistics collection of 5 second CPU utilization.
scalarSNMPv2-SMIGauge32.1.3.6.1.4.1.1991.1.1.2.1.51
snAgGblCpuUtil1MinAvg
The statistics collection of 1 minute CPU utilization.
scalarSNMPv2-SMIGauge32.1.3.6.1.4.1.1991.1.1.2.1.52
snAgGblDynMemUtil deprecated
The system dynamic memory utilization, in unit of percentage. Deprecated: Refer to snAgSystemDRAMUtil
scalarSNMPv2-SMIGauge32.1.3.6.1.4.1.1991.1.1.2.1.53
snAgGblDynMemTotal deprecated
The total amount of system dynamic memory, in number of bytes. Deprecated: Refer to snAgSystemDRAMTotal
scalarSNMPv2-SMIGauge32.1.3.6.1.4.1.1991.1.1.2.1.54
snAgImgLoadSPModuleType
The switch processor module type of which that receives the downloaded image.
scalarEnumeration.1.3.6.1.4.1.1991.1.1.2.1.56
snAgImgLoadSPModuleNumber
The slot numner of a switch processor module that receives the downloaded image. Setting value 0 applies to all SP modules.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.1991.1.1.2.1.57
snAgTrapHoldTime
The time in seconds for which traps will be witheld during system initialization.
scalarInteger32.1.3.6.1.4.1.1991.1.1.2.1.58
snAgSFlowSourceInterface
Use the ifIndex value here to specify the source interface to be used for sFlow packets. The interface should have IP address configured on it. Value of 0 indicates that source in…
scalarIF-MIBInterfaceIndex.1.3.6.1.4.1.1991.1.1.2.1.59
snAgImgFname
Name of the image file including path currently associated with the system. When the object is not used, the value is a zero length string.
scalarOctetString.1.3.6.1.4.1.1991.1.1.2.1.6
snAgGblTelnetLoginTimeout
Telnet session login timeout value in minutes. Default is 2 minutes.
scalarInteger32.1.3.6.1.4.1.1991.1.1.2.1.60
snAgGblBannerExec
EXEC process creation banner. Insert newlines using '\n' within the string.
scalarDisplayString.1.3.6.1.4.1.1991.1.1.2.1.61
snAgGblBannerIncoming
Incoming terminal line banner. Insert newlines using '\n' within the string.
scalarDisplayString.1.3.6.1.4.1.1991.1.1.2.1.62
snAgGblBannerMotd
Message-of-the-day banner. Insert newlines using '\n' within the string.
scalarDisplayString.1.3.6.1.4.1.1991.1.1.2.1.63
snAgWebMgmtServerTcpPort
The TCP port number of web management interface.
scalarInteger32.1.3.6.1.4.1.1991.1.1.2.1.64
snAgTftpServerAddrType
TFTP server IP address Type. Supported address types are ipv4(1) and ipv6(2)
scalarINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.1991.1.1.2.1.65
snAgTftpServerAddr
TFTP server IP address.
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.1991.1.1.2.1.66
snAgGblPasswordCheckMode
enabled(1) - The password checking for SNMP set requests is enabled. The default value is enable. disabled(2) - The password checking for SNMP set requests is disabled. When en…
scalarP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.1991.1.1.2.1.68
snAgGblEnableTelnetAuthentication
Enable or disable telnet authentication in device.
scalarEnumeration.1.3.6.1.4.1.1991.1.1.2.1.69
snAgImgLoad
Action object to down/up load a new image to the agent. The following values: Error values: from normal(1) to operationError(17) and tftpWrongFileType(23). loading(18) .. operat…
scalarEnumeration.1.3.6.1.4.1.1991.1.1.2.1.7
snAgGblManager2FactorAuthentication
enabled(1) - The manager two-factor authentication is enabled. Only revSSH access through SZ is allowed and all incoming SSH sessions to device are closed when two-factor authenti…
scalarEnumeration.1.3.6.1.4.1.1991.1.1.2.1.70
snAgCfgFname
Name of the config file(s) including path currently associated with the system. Some agents in special situations may support a value which contains multiple file names instead of…
scalarOctetString.1.3.6.1.4.1.1991.1.1.2.1.8
snAgCfgLoad
Action object to down/up load a config image to the agent. The following values can be read : Error values: from normal(1) to operationError(17) and tftpWrongFileType(29). loadi…
scalarEnumeration.1.3.6.1.4.1.1991.1.1.2.1.9