pwCwPreference
FOUNDRY-PW-STD-MIB ·
.1.3.6.1.4.1.1991.3.1.2.1.2.1.17
Object
Defines if the control word will be sent with each packet by the local node. Some PW types mandate the use of a control word, and in such cases the value configured for this object has no effect on the existence of the control word. This object MAY be changed only if the PW is not active.
Context
- MIB
- FOUNDRY-PW-STD-MIB
- OID
.1.3.6.1.4.1.1991.3.1.2.1.2.1.17- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- pwEntry
- Table
- pwTable
- Siblings
- 44
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pwIndex A unique index for the conceptual row identifying a PW within
this table. | column | FOUNDRY-PW-TC-STD-MIBPwIndexType | .1.3.6.1.4.1.1991.3.1.2.1.2.1.1 |
| pwAttachedPwIndex If the PW is attached to another PW instead of a local
native service, this item indicates the pwIndex of the
attached PW. Otherwise, this object MUST
be set to zero. Attachement … | column | FOUNDRY-PW-TC-STD-MIBPwIndexOrZeroType | .1.3.6.1.4.1.1991.3.1.2.1.2.1.10 |
| pwIfIndex This object indicates the ifIndex of the PW if the PW is
represented in the ifTable. Otherwise, it MUST be set
to zero. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.1991.3.1.2.1.2.1.11 |
| pwID Pseudo Wire identifier.
If the pwOwner object is 'pwIdFecSignaling' or
'l2tpControlProtocol', then this object is signaled in the
outgoing PW ID field within the 'V… | column | FOUNDRY-PW-TC-STD-MIBPwIDType | .1.3.6.1.4.1.1991.3.1.2.1.2.1.12 |
| pwLocalGroupID Used in the Group ID field sent to the peer PWES
within the maintenance protocol used for PW setup.
It SHOULD be set to zero if maintenance protcol is
not used. | column | FOUNDRY-PW-TC-STD-MIBPwGroupID | .1.3.6.1.4.1.1991.3.1.2.1.2.1.13 |
| pwGroupAttachmentID This object is an octet string representing the attachment
group identifier (AGI) that this PW belongs too, which
typically identifies the VPN ID.
Applicable if pwOwner equal 'gen… | column | FOUNDRY-PW-TC-STD-MIBPwAttachmentIdentifierType | .1.3.6.1.4.1.1991.3.1.2.1.2.1.14 |
| pwLocalAttachmentID This object is an octet string representing the local
forwarder attachment individual identifier (AII) to be
used by this PW. It is used as the SAII for outgoing
signaling message… | column | FOUNDRY-PW-TC-STD-MIBPwAttachmentIdentifierType | .1.3.6.1.4.1.1991.3.1.2.1.2.1.15 |
| pwPeerAttachmentID This object is an octet string representing the peer
forwarder attachment individual identifier (AII) to be
used by this PW. It is used as the TAII for outgoing
signaling messages… | column | FOUNDRY-PW-TC-STD-MIBPwAttachmentIdentifierType | .1.3.6.1.4.1.1991.3.1.2.1.2.1.16 |
| pwLocalIfMtu If not equal to zero, the optional IfMtu object in the
signaling protocol will be sent with this value, which
represents the locally-supported MTU size over the
interface (or the … | column | Unsigned32 | .1.3.6.1.4.1.1991.3.1.2.1.2.1.18 |
| pwLocalIfString A PW MAY be associated to an interface (or a virtual
interface) in the ifTable of the node as part of the
service configuration. This object defines if the
maintenance protocol wi… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1991.3.1.2.1.2.1.19 |
| pwType This value indicates the emulated service to be carried over
this PW. | column | FOUNDRY-IANA-PWE3-MIBIANAPwTypeTC | .1.3.6.1.4.1.1991.3.1.2.1.2.1.2 |
| pwLocalCapabAdvert If maintenance protcol is used, it indicates the
capabilities the local node will advertize to the
peer. The operator MAY selectively assign partial set
of capabilities. In case o… | column | FOUNDRY-IANA-PWE3-MIBIANAPwCapabilities | .1.3.6.1.4.1.1991.3.1.2.1.2.1.20 |
| pwRemoteGroupID This object is obtained from the Group ID field as
received via the maintenance protocol used for PW setup.
Value zero will be reported if not used.
Value of 0xFFFFFFFF shall be u… | column | FOUNDRY-PW-TC-STD-MIBPwGroupID | .1.3.6.1.4.1.1991.3.1.2.1.2.1.21 |
| pwCwStatus If signaling is used for PW establishment, this object
indicates the status of the control word negotiation,
and in both; signaling or manual configuration it indicates
if CW is t… | column | FOUNDRY-PW-TC-STD-MIBPwCwStatusTC | .1.3.6.1.4.1.1991.3.1.2.1.2.1.22 |
| pwRemoteIfMtu The remote interface MTU as (optionally) received from the
remote node via the maintenance protocol. The object SHOULD
report zero if MTU is not available. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1991.3.1.2.1.2.1.23 |
| pwRemoteIfString Indicates the interface description string as received by
the maintenance protocol. It MUST be a NULL string if
maintenance protocol is not used or the value is not known
yet. | column | OctetString | .1.3.6.1.4.1.1991.3.1.2.1.2.1.24 |
| pwRemoteCapabilities Indicates the capabilities as recieved from the peer. | column | FOUNDRY-IANA-PWE3-MIBIANAPwCapabilities | .1.3.6.1.4.1.1991.3.1.2.1.2.1.25 |
| pwFragmentCfgSize If set to a value other than zero, indicates that
fragmentation is desired for this PW.
This object MAY be changed only if the PW is not active. | column | bytes FOUNDRY-PW-TC-STD-MIBPwFragSize | .1.3.6.1.4.1.1991.3.1.2.1.2.1.26 |
| pwRmtFragCapability The status of the fragmentation based on the local
configuration and the peer capabilities as recieved from
the peer when control protocol is used. | column | FOUNDRY-PW-TC-STD-MIBPwFragStatus | .1.3.6.1.4.1.1991.3.1.2.1.2.1.27 |
| pwFcsRetentionCfg The local configuration of FCS retention for this PW. FCS
retention can be configured for PW types HDLC, PPP and
Ethernet only. If the implementation does not support
FCS retentio… | column | Enumeration | .1.3.6.1.4.1.1991.3.1.2.1.2.1.28 |
| pwFcsRetentionStatus The status of the FCS retention negotiation process based on
local configuration and the remote advertisement.
remoteIndicationUnknown - set if a FEC has not been r… | column | Bits | .1.3.6.1.4.1.1991.3.1.2.1.2.1.29 |
| pwOwner This object is set by the operator to indicate the protocol
responsible for establishing this PW.
'manual' is used in all cases where no maintenance
protocol (PW signaling) is use… | column | Enumeration | .1.3.6.1.4.1.1991.3.1.2.1.2.1.3 |
| pwOutboundLabel The PW label used in the outbound direction (i.e. toward
the PSN). It might be set manually if pwOwner is 'manual',
otherwise setting done automatically.
For MPLS, MPLS over IP or… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1991.3.1.2.1.2.1.30 |
| pwInboundLabel The PW label used in the inbound direction (i.e. packets
received from the PSN). It may be set manually if pwOwner
is 'manual',otherwise setting done automatically.
For MPLS, MPLS… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1991.3.1.2.1.2.1.31 |
| pwName The canonical name assigned to the PW. This object MAY be
changed at any time. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.1991.3.1.2.1.2.1.32 |
| pwDescr A textual string containing information about the PW.
If there is no description this object contains a zero
length string. This object MAY be changed at any time. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.1991.3.1.2.1.2.1.33 |
| pwCreateTime The value of sysUpTime at the time this PW was created. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.1991.3.1.2.1.2.1.34 |
| pwUpTime Specifies the time since last change of pwOperStatus to
Up(1). | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.1991.3.1.2.1.2.1.35 |
| pwLastChange The value of sysUpTime at the time the PW entered
its current operational state. If the current state was
entered prior to the last re-initialization of the local
network managem… | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.1991.3.1.2.1.2.1.36 |
| pwAdminStatus The desired operational status of this PW. This object MAY
be set at any time. | column | Enumeration | .1.3.6.1.4.1.1991.3.1.2.1.2.1.37 |
| pwOperStatus This object indicates the operational status of the PW, it
does not reflect the status of the CE bound interface.
It is set to down only if pwNotForwarding,
psnFacingPwRxFault, or… | column | FOUNDRY-PW-TC-STD-MIBPwOperStatusTC | .1.3.6.1.4.1.1991.3.1.2.1.2.1.38 |
| pwLocalStatus Indicates the status of the PW in the local node.
The various indications in this object SHOULD be
available independent of the ability of the local node to
advertise them or the … | column | FOUNDRY-PW-TC-STD-MIBPwStatus | .1.3.6.1.4.1.1991.3.1.2.1.2.1.39 |
| pwPsnType This object is set by the operator to indicate the PSN type.
Based on this object, the relevant PSN table's entry is
created in the PSN specific MIB modules. | column | FOUNDRY-IANA-PWE3-MIBIANAPwPsnTypeTC | .1.3.6.1.4.1.1991.3.1.2.1.2.1.4 |
| pwRemoteStatusCapable Indicates the remote node capability to advertise the
PW status notification.
notAppicable SHOULD be reported for manually set PW, or
if the local node is not capable of accepting… | column | Enumeration | .1.3.6.1.4.1.1991.3.1.2.1.2.1.40 |
| pwRemoteStatus Indicates the status of the PW as was advertised by the
remote. If the remote is not capable of advertising the
status object, or the local node is not able to accept
the status o… | column | FOUNDRY-PW-TC-STD-MIBPwStatus | .1.3.6.1.4.1.1991.3.1.2.1.2.1.41 |
| pwTimeElapsed The number of seconds, including partial seconds,
that have elapsed since the beginning of the current
interval measurement period. | column | HC-PerfHist-TC-MIBHCPerfTimeElapsed | .1.3.6.1.4.1.1991.3.1.2.1.2.1.42 |
| pwValidIntervals The number of previous 15-minute intervals
for which data was collected. | column | HC-PerfHist-TC-MIBHCPerfValidIntervals | .1.3.6.1.4.1.1991.3.1.2.1.2.1.43 |
| pwRowStatus For creating, modifying, and deleting this row.
This object MAY be changed at any time. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.1991.3.1.2.1.2.1.44 |
| pwStorageType This variable indicates the storage type for this
object. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.1991.3.1.2.1.2.1.45 |
| pwOamEnable This variable indicates if OAM is enabled for this
PW. It MAY be changed at any time. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1991.3.1.2.1.2.1.46 |
| pwSetUpPriority This object defines the relative priority of the PW
during set-up in a lowest-to-highest fashion, where 0
is the highest priority. PWs with the same priority
are treated with equa… | column | Integer32 | .1.3.6.1.4.1.1991.3.1.2.1.2.1.5 |
| pwHoldingPriority This object defines the relative holding priority of the
PW in a lowest-to-highest fashion, where 0 is the highest
priority. PWs with the same priority are treated equally.
This v… | column | Integer32 | .1.3.6.1.4.1.1991.3.1.2.1.2.1.6 |
| pwPeerAddrType Denotes the address type of the peer node. It should be
set to 'unknown' if PE/PW maintenance protocol is not used
and the address is unknown. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.1991.3.1.2.1.2.1.8 |
| pwPeerAddr This object contains the value of the peer node address
of the PW/PE maintenance protocol entity. This object
SHOULD contain a value of all zeroes if not applicable
(pwPeerAddrTyp… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.1991.3.1.2.1.2.1.9 |