flWlanWifiVapManRoaming – FL-MGD-INFRASTRUCT-MIB

Object

column r/w SNMPv2-TCDisplayString

Format:
{normal 00:00:00:00:00:00}
{bssid xx:xx:xx:xx:xx:xx}
              
Examples: 
1) Start a common scan process based on the best accesspoint using
the current configured ssid: {normal 00:00:00:00:00:00} 
              
2a) Leave the normal scan method and trigger a roaming process
to a specific accesspoint with the given BSSID: {bssid 00:a0:45:11:22:33}
              
2b) To disable the bssid roaming mode (2a) and return back to normal scan method,
the following input is requiered: {bssid 00:00:00:00:00:00}
              
This object is just writable.
And it is only writable in client mode when a connection to an access point exists.

Context

MIB: FL-MGD-INFRASTRUCT-MIB
OID: .1.3.6.1.4.1.4346.11.11.27.2.1.1.12
Type: column
Access: readwrite
Status: current
Parent: flWlanWifiVapEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FL-MGD-INFRASTRUCT-MIB' -M '/opt/observium/mibs/phoenix:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FL-MGD-INFRASTRUCT-MIB::flWlanWifiVapManRoaming'

More examples

Read one indexed instance

/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'FL-MGD-INFRASTRUCT-MIB' -M '/opt/observium/mibs/phoenix:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FL-MGD-INFRASTRUCT-MIB::flWlanWifiVapManRoaming.<flWlanWifiVapID>'

Translate to a numeric OID

/usr/bin/snmptranslate -Pud -Ir -On -m 'FL-MGD-INFRASTRUCT-MIB' -M '/opt/observium/mibs/phoenix:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'FL-MGD-INFRASTRUCT-MIB::flWlanWifiVapManRoaming'

Syntax

SNMPv2-TCDisplayString

Source: SNMPv2-TCDisplayString
Base type: OctetString
Display format: 255a

Type Description

Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Type Constraints

range: 0..255