bpIfStatsPortIndex
F10-BPSTATS-MIB ·
.1.3.6.1.4.1.6027.3.24.2.1.2.1.3
Object
column
Integer32
BP port number. Maximum ports shall support by Trident2 BCM npu is 128. This address space includes FE ports also, which are invalid ports as far as BP is concern. For Z9000 leaf BCM units, 34 to 41 are the valid BP port numbers and for spine BCM units, 1 to 16 are the valid BP ports
Context
- MIB
- F10-BPSTATS-MIB
- OID
.1.3.6.1.4.1.6027.3.24.2.1.2.1.3- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- bpIfStatsEntry
- Table
- bpIfStatsTable
- Siblings
- 28
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-128
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bpIfStatsStackUnitIndex Stack unit(Card Type Id) number where this port present
Each card shall contain more than one BCM units | column | Integer32 | .1.3.6.1.4.1.6027.3.24.2.1.2.1.1 |
| bpIfStatsInThrottles This counter is incremented when a valid
frame with a length or type field value equal
to 0x8808 (Control Frame) is received. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6027.3.24.2.1.2.1.10 |
| bpIfStatsInRunts The total number of frames received that were
less than 64 octets long (excluding framing bits,
but including FCS octets) and were otherwise
well formed. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6027.3.24.2.1.2.1.11 |
| bpIfStatsInGiants The total number of frames received that were
longer than 1518 (1522 Bytes in case of VLAN Tag)
octets (excluding framing bits, but including FCS
octets) and were otherwise well f… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6027.3.24.2.1.2.1.12 |
| bpIfStatsInCRC The total number of frames received that had
a length (excluding framing bits, but including
FCS octets) of between 64 and 1518 octets,
inclusive, but had a bad CRC. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6027.3.24.2.1.2.1.13 |
| bpIfStatsInOverruns The total number of frames has been chosen to be
dropped by detecting the buffer issue | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6027.3.24.2.1.2.1.14 |
| bpIfStatsOutUnderruns The total number of frames dropped because
of buffer underrun. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6027.3.24.2.1.2.1.15 |
| bpIfStatsOutUnicasts The total number of Unicast frames are transmitted
out of the interface | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6027.3.24.2.1.2.1.16 |
| bpIfStatsOutCollisions A count of the frames that due to excessive
or late collisions are not transmitted successfully. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6027.3.24.2.1.2.1.17 |
| bpIfStatsOutWredDrops The total number of frames are dropped by using
WRED policy due to excessive traffic. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6027.3.24.2.1.2.1.18 |
| bpIfStatsOut64BytePkts The total number of valid frames with the
block of 64 byte size is transmitted | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6027.3.24.2.1.2.1.19 |
| bpIfStatsPortPipe bpPortPipe denotes the BCM unit in the stack unit(card Type)
Each BCM unit shall contain 1-128 local ports, which includes
BP as well as front end ports | column | Integer32 | .1.3.6.1.4.1.6027.3.24.2.1.2.1.2 |
| bpIfStatsOut65To127BytePkts The total of valid frame with the block size of
range between 65 and 127 bytes are transmitted. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6027.3.24.2.1.2.1.20 |
| bpIfStatsOut128To255BytePkts The total of valid frame with the block size of
range between 128 and 255 bytes are transmitted | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6027.3.24.2.1.2.1.21 |
| bpIfStatsOut256To511BytePkts The total of valid frame with the block size of
range between 256 and 511 bytes are transmitted | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6027.3.24.2.1.2.1.22 |
| bpIfStatsOut512To1023BytePkts The total of valid frame with the block size of
range between 512 and 1023 bytes are transmitted | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6027.3.24.2.1.2.1.23 |
| bpIfStatsOutOver1023BytePkts The total of valid frame with the block size of
greater than 1023 bytes are transmitted. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6027.3.24.2.1.2.1.24 |
| bpIfStatsOutThrottles This counter is incremented when a valid
frame with a length or type field value equal
to 0x8808 (Control Frame) is sent. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6027.3.24.2.1.2.1.25 |
| bpIfStatsLastDiscontinuityTime The value of sysUpTime on the most recent occasion
at which this interface's counters suffered a
discontinuity via a reset. If no such discontinuities
have occurred since the last… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6027.3.24.2.1.2.1.26 |
| bpIfStatsInCentRate This is the percentage of maximum line rate
at which data is receiving on the Interface.
For Z9000 - BP hiGig line rate is 42G.
This is an integer value which can go from 0% to 10… | column | Integer32 | .1.3.6.1.4.1.6027.3.24.2.1.2.1.27 |
| bpIfStatsOutCentRate This is the percentage of maximum line rate
at which data is sending on the Interface.
For Z9000 - BP hiGig line rate is 42G.
This is an integer value which can go from 0% to 100%. | column | Integer32 | .1.3.6.1.4.1.6027.3.24.2.1.2.1.28 |
| bpIfStatsLastChange The value of sysUpTime, on which all the counters are
updated recently | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.6027.3.24.2.1.2.1.29 |
| bpIfStatsIn64BytePkts The total number of frames (including bad
frames) received that were 64 octets in length
(excluding framing bits but including FCS octets). | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6027.3.24.2.1.2.1.4 |
| bpIfStatsIn65To127BytePkts The total number of frames (including bad
frames) received that were between 65 and 127
octets in length inclusive (excluding framing
bits but including FCS octets). | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6027.3.24.2.1.2.1.5 |
| bpIfStatsIn128To255BytePkts The total number of frames (including bad
frames) received that were between 128 and 255
octets in length inclusive (excluding framing
bits but including FCS octets). | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6027.3.24.2.1.2.1.6 |
| bpIfStatsIn256To511BytePkts The total number of frames (including bad
frames) received that were between 256 and 511
octets in length inclusive (excluding framing
bits but including FCS octets). | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6027.3.24.2.1.2.1.7 |
| bpIfStatsIn512To1023BytePkts The total number of frames (including bad
frames) received that were between 512 and 1023
octets in length inclusive (excluding framing
bits but including FCS octets). | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6027.3.24.2.1.2.1.8 |
| bpIfStatsInOver1023BytePkts The total number of frames received that
were longer than 1023 (1025 Bytes in case of
VLAN Tag) octets (excluding framing bits, but
including FCS octets) and were otherwise
well f… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6027.3.24.2.1.2.1.9 |