extremeInletTemperature
EXTREME-SYSTEM-MIB ·
.1.3.6.1.4.1.1916.1.1.1.55
Object
scalar
Integer32
Current temperature in degrees celcius measured outside device enclosure.
Context
- MIB
- EXTREME-SYSTEM-MIB
- OID
.1.3.6.1.4.1.1916.1.1.1.55- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- extremeSystemCommon
- Siblings
- 50
Syntax
Integer32
Values & Constraints
Object Constraints
range: -24-100
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| extremePrimaryPowerOperational Operational status of internal power supply of a device. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1916.1.1.1.10 |
| extremeRedundantPowerStatus Operational status of an external redundant power supply to a device. | scalar | Enumeration | .1.3.6.1.4.1.1916.1.1.1.11 |
| extremeRedundantPowerAlarm Alarm state of an external redundant power supply to a device.
Alarm state indicates either fan failure or overtemperature
condition. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1916.1.1.1.12 |
| extremePrimarySoftwareRev The software revision of the primary image stored in
this device. This string will have a zero length if
the revision is unknown, invalid or not present. This
will also be repo… | scalar | OctetString | .1.3.6.1.4.1.1916.1.1.1.13 |
| extremeSecondarySoftwareRev The software revision of the secondary image stored in
this device. This string will have a zero length if
the revision is unknown, invalid or not present. This
will also be re… | scalar | OctetString | .1.3.6.1.4.1.1916.1.1.1.14 |
| extremeImageToUseOnReboot Controls which image will be used
on next reboot. | scalar | Enumeration | .1.3.6.1.4.1.1916.1.1.1.15 |
| extremeSystemID This represents the System ID of the Summit Switch. | scalar | OctetString | .1.3.6.1.4.1.1916.1.1.1.16 |
| extremeSystemBoardID This represents the Board ID of the Summit Switch. | scalar | OctetString | .1.3.6.1.4.1.1916.1.1.1.17 |
| extremeSystemLeftBoardID This represents the Left Board ID of the Summit Switch. | scalar | OctetString | .1.3.6.1.4.1.1916.1.1.1.18 |
| extremeSystemRightBoardID This represents the Right Board ID of the Summit Switch. | scalar | OctetString | .1.3.6.1.4.1.1916.1.1.1.19 |
| extremeInputPowerVoltage The input power voltage at which the system is currently operating. | scalar | PowerValue | .1.3.6.1.4.1.1916.1.1.1.20 |
| extremePowerStatus Operational status of the power supply to a device. | scalar | Enumeration | .1.3.6.1.4.1.1916.1.1.1.21 |
| extremePowerAlarm Alarm state of the power supply to a device.
Alarm state indicates either fan failure or overtemperature
condition. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1916.1.1.1.22 |
| extremeRmonEnable Setting this to true will cause the agent to
start collecting RMON statistics. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1916.1.1.1.23 |
| extremeBootROMVersion The software revision of the bootrom on the device.
This string will have a zero length if the revision is
unknown or invalid. | scalar | OctetString | .1.3.6.1.4.1.1916.1.1.1.25 |
| extremeDot1dTpFdbTableEnable obsolete Setting this to true will cause GetNext operations on the dot1dTpFdbTable to be allowed. Note that Get operations are always allowed. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1916.1.1.1.26 |
| extremePowerSupplyTable Table of status of all power supplies in the system. | table | - | .1.3.6.1.4.1.1916.1.1.1.27 |
| extremeCpuAggregateUtilization deprecated The aggregate CPU utilization since
the time the start started executing. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1916.1.1.1.28 |
| extremeCpuTask2Table deprecated Table of CPU tasks that are active. | table | - | .1.3.6.1.4.1.1916.1.1.1.29 |
| extremeSaveConfiguration When this object is set, the device will copy the contents
of the configuration database to a buffer and save it to the
persistent store specified by the value of the object. The… | scalar | Enumeration | .1.3.6.1.4.1.1916.1.1.1.3 |
| extremeAuthFailSrcAddr deprecated The IP address of the originator of the bad SNMP
request that caused the generation of an authentication
failure trap. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1916.1.1.1.30 |
| extremeCpuTransmitPriority deprecated The CPU transmit priority. | scalar | Enumeration | .1.3.6.1.4.1.1916.1.1.1.31 |
| extremeImageBooted The image with which the switch was last booted, using which it is currently running. | scalar | Enumeration | .1.3.6.1.4.1.1916.1.1.1.32 |
| extremeMsmFailoverCause The cause of the last MSM failover. never(1) means an
MSM Failover has not occurred since the last reboot.
admin(2) means the failover was initiated by the user.
exception(3) me… | scalar | Enumeration | .1.3.6.1.4.1.1916.1.1.1.33 |
| extremeImageTable A table containing information about each software image. | table | - | .1.3.6.1.4.1.1916.1.1.1.34 |
| extremeImageFeatureTable A table containing information about the software features. | table | - | .1.3.6.1.4.1.1916.1.1.1.35 |
| extremeSystemPowerState The current state of power available. | scalar | Enumeration | .1.3.6.1.4.1.1916.1.1.1.36 |
| extremeBootTime The boot time expressed in standard time_t value.
When interpreted as an absolute time value, it
represents the number of seconds elapsed since 00:00:00
on January 1, 1970, Coor… | scalar | SNMPv2-SMICounter64 | .1.3.6.1.4.1.1916.1.1.1.37 |
| extremePowerSupplyOutputPowerTable The output power supply table per power supply unit. | table | - | .1.3.6.1.4.1.1916.1.1.1.38 |
| extremePowerSupplyUsageTable The power supply usage on each slot. | table | - | .1.3.6.1.4.1.1916.1.1.1.39 |
| extremeSaveStatus This object will return the status of a save operation invoked
by setting the extremeSaveConfiguration object. A network
management application can read this object to determine … | scalar | Enumeration | .1.3.6.1.4.1.1916.1.1.1.4 |
| extremeSystemPowerUsage | node | - | .1.3.6.1.4.1.1916.1.1.1.40 |
| extremeSystemPowerMonitorTable The output power supply table per power supply unit. | table | - | .1.3.6.1.4.1.1916.1.1.1.41 |
| extremeRebootTable This group of objects use to initiate a device reboot or
contain details of the last reboot operation of the switch
modules or nodes. | table | - | .1.3.6.1.4.1.1916.1.1.1.42 |
| extremeDownloadImageTable This group of objects contain details of the last
or the current download image operation of the switch
modules or nodes. | table | - | .1.3.6.1.4.1.1916.1.1.1.43 |
| extremeInstallImageTable This group of objects contain details of the last
or the current install image operation of the switch
modules or nodes. | table | - | .1.3.6.1.4.1.1916.1.1.1.44 |
| extremeLoadInstallTrap | node | - | .1.3.6.1.4.1.1916.1.1.1.45 |
| extremeSaveConfigurationFileName This object is set, along the object extremSaveConfiguration
option with value 5.This object indicates the file name to be used
while saving the file. On reading it returns the cu… | scalar | OctetString | .1.3.6.1.4.1.1916.1.1.1.48 |
| extremeUseOnRebootFileName This object is set, along the object extremeConfigToUseOnReboot
option with value 3.This object indicates the file name to be used
while saving the file | scalar | OctetString | .1.3.6.1.4.1.1916.1.1.1.49 |
| extremeCurrentConfigInUse Shows which NVRAM configuration store was used at last boot. | scalar | Enumeration | .1.3.6.1.4.1.1916.1.1.1.5 |
| extremeAuthFailSrcAddressType This object indicates the address type of the
address contained in extremeAuthFailSrcAddr. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.1916.1.1.1.50 |
| extremeAuthFailSrcAddress The address of the originator of the SNMP message that
could not be authenticated. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.1916.1.1.1.51 |
| extremeAuthFailSrcAddressVrName The VR from which the SNMP message that could
not be authenticated was received from. | scalar | OctetString | .1.3.6.1.4.1.1916.1.1.1.52 |
| extremeAutoSave | node | - | .1.3.6.1.4.1.1916.1.1.1.53 |
| extremePortNotation Identifies the port notation and delimiter format used by ifName. It is
used to disambiguate port specifications having a single delimiter. That
is, to determine whether a slot … | scalar | Enumeration | .1.3.6.1.4.1.1916.1.1.1.54 |
| extremeInletTemperatureStatus Operational status of inlet temperature sensor. | scalar | Enumeration | .1.3.6.1.4.1.1916.1.1.1.56 |
| extremeConfigToUseOnReboot Controls which NVRAM configuration store will be used
on next reboot. | scalar | Enumeration | .1.3.6.1.4.1.1916.1.1.1.6 |
| extremeOverTemperatureAlarm Alarm status of overtemperature sensor in device
enclosure. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1916.1.1.1.7 |
| extremeCurrentTemperature Current temperature in degrees celcius measured inside
device enclosure. | scalar | Integer32 | .1.3.6.1.4.1.1916.1.1.1.8 |
| extremeFanStatusTable Table of operational status of all internal cooling fans. | table | - | .1.3.6.1.4.1.1916.1.1.1.9 |