extremeOspfv3MulticastExtensions

EXTREME-OSPFV3-MIB · .1.3.6.1.4.1.1916.1.50.1.1.12
MIB view Table view

Object

scalar r/w Bits 
A Bit Mask indicating whether the router is
forwarding IPv6 multicast datagrams based on
the algorithms defined in the  Multicast
Extensions to OSPF.
          
If intraAreaMulticast set, indicates that the router
can forward IPv6 multicast datagrams in the router's
directly attached areas (called intra-area
multicast routing).
          
If interAreaMulticast set, indicates that the router
can forward IPv6 multicast datagrams between OSPFv3
areas (called inter-area multicast routing).
          
If interAsMulticast set, indicates that the router can
forward  IPv6  multicast datagrams between
Autonomous Systems (called inter-AS multicast
routing).
          
Only certain combinations of bit settings are
allowed, namely:
        - All bits cleared (no multicasting)
        - intraAreaMulticast only,
        - intraAreaMulticast and interAreaMulticast,
        - intraAreaMulticast and interAsMulticast
        - intraAreaMulticast, interAreaMulticast and
                interAsMulticast
By default, all bits are cleared.

Context

MIB
EXTREME-OSPFV3-MIB
OID
.1.3.6.1.4.1.1916.1.50.1.1.12
Type
scalar
Access
readwrite
Status
current
Parent
extremeOspfv3GeneralGroup
Siblings
20

Syntax

Bits

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
extremeOspfv3RouterId
A 32-bit integer uniquely identifying the router in the Autonomous System. To ensure uniqueness, this may default to the value of one of the router's IPv4 host addresses, represen…
scalarExtremeOspfv3RouterIdTc.1.3.6.1.4.1.1916.1.50.1.1.1
extremeOspfv3ExtLsaCount
The number of External(LS type 0x4005) in the link state database
scalarSNMPv2-SMIGauge32.1.3.6.1.4.1.1916.1.50.1.1.10
extremeOspfv3ExtAreaLsdbLimit
The maximum number of non-default AS-external-LSAs entries that can be stored in the link state database. If the value is -1, then there is no limit. …
scalarInteger32.1.3.6.1.4.1.1916.1.50.1.1.11
extremeOspfv3ExitOverflowInterval
The number of seconds that, after entering Overflow State, a router will attempt to leave Overflow State. This allows the router to again originate non-default, AS-External-LSAs. …
scalarseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.1916.1.50.1.1.13
extremeOspfv3DemandExtensions
The router's support for demand routing.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.1916.1.50.1.1.14
extremeOspfv3ReferenceBandwidth
Reference bandwidth in kilobits/second for calculating default interface metrics. The default value is 100,000 KBPS (100 MBPS)
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1916.1.50.1.1.15
extremeOspfv3RestartSupport
The router's support for OSPF Graceful restart. Options include: no restart support, only planned restarts or both planned and unplanned restarts.
scalarEnumeration.1.3.6.1.4.1.1916.1.50.1.1.16
extremeOspfv3RestartInterval
Configured OSPF Graceful restart timeout interval.
scalarseconds ExtremeOspfv3UpToRefreshIntervalTc.1.3.6.1.4.1.1916.1.50.1.1.17
extremeOspfv3RestartStatus
The current status of OSPF Graceful restart capability.
scalarEnumeration.1.3.6.1.4.1.1916.1.50.1.1.18
extremeOspfv3RestartAge
Remaining time in current OSPF Graceful restart interval.
scalarseconds ExtremeOspfv3UpToRefreshIntervalTc.1.3.6.1.4.1.1916.1.50.1.1.19
extremeOspfv3AdminStat
The administrative status of OSPFv3 in the router. The value 'enabled' denotes that the OSPFv3 Process is active on at least one interface; 'disabled' disables it on all interface…
scalarOSPF-MIBStatus.1.3.6.1.4.1.1916.1.50.1.1.2
extremeOspfv3RestartExitRc
Describes the outcome of the last attempt at a Graceful restart. none:............no restart has yet been attempted. inProgress:......a restart attempt is currently und…
scalarEnumeration.1.3.6.1.4.1.1916.1.50.1.1.20
extremeOspfv3NotificationEnable
This object provides a coarse level of control over the generation of OSPFv3 notifications. If this object is set to true (1), then it enables the generation of OSPFv3 …
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.1916.1.50.1.1.21
extremeOspfv3VersionNumber
The version number of OSPF for IPv6 is 3.
scalarEnumeration.1.3.6.1.4.1.1916.1.50.1.1.3
extremeOspfv3AreaBdrRtrStatus
A flag to note whether this router is an area border router.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.1916.1.50.1.1.4
extremeOspfv3ASBdrRtrStatus
A flag to note whether this router is configured as an Autonomous System border router.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.1916.1.50.1.1.5
extremeOspfv3AsScopeLsaCount
The number of AS-Scope (e.g. AS-External) link state advertisements in the link state database.
scalarSNMPv2-SMIGauge32.1.3.6.1.4.1.1916.1.50.1.1.6
extremeOspfv3AsScopeLsaCksumSum
The 32-bit unsigned sum of the LS checksums of the AS-scoped link state advertisements contained in the link state database. This sum can be used to determine if there has been …
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.1916.1.50.1.1.7
extremeOspfv3OriginateNewLsas
The number of new link-state advertisements that have been originated. This number is incremented each time the router originates a new LSA.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.1916.1.50.1.1.8
extremeOspfv3RxNewLsas
The number of link state advertisements received determined to be new instantiations. This number does not include newer instantiations of self-originated link state advertisement…
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.1916.1.50.1.1.9
Notification Objects
ObjectTypeSyntaxOID
CPQHSV400V11-MIBhostName mandatory
The Host Name.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.232.136.1.3.3.2.1.2
CPQHSV400V11-MIBscellNameDateTime mandatory
The StorageCell Name: Date & Time of Event.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.232.136.1.3.1.2.1.12
CPQHSV400V11-MIBagentEventCode mandatory
The management agent event code.
columnInteger32.1.3.6.1.4.1.232.136.1.1.7.1.3
CPQHSV400V11-MIBagentEventDescription mandatory
The Description of the management agent event.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.232.136.1.1.7.1.6