extremeOspfv3ExtAreaLsdbLimit
EXTREME-OSPFV3-MIB ·
.1.3.6.1.4.1.1916.1.50.1.1.11
Object
scalar
r/w
Integer32
The maximum number of non-default
AS-external-LSAs entries that can be stored in the
link state database. If the value is -1, then
there is no limit.
When the number of non-default AS-external-LSAs
in a router's link-state database reaches
extremeOspfv3ExtAreaLsdbLimit, the router enters Overflow
state. The router never holds more than
extremeOspfv3ExtAreaLsdbLimit non-default AS-external-LSAs
in its database. OspfExtAreaLsdbLimit MUST be set
identically in all routers attached to the OSPFv3
backbone and/or any regular OSPFv3 area. (i.e.,
OSPFv3 stub areas and NSSAs are excluded).
Context
- MIB
- EXTREME-OSPFV3-MIB
- OID
.1.3.6.1.4.1.1916.1.50.1.1.11- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- extremeOspfv3GeneralGroup
- Siblings
- 20
Syntax
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| extremeOspfv3RouterId A 32-bit integer uniquely identifying the
router in the Autonomous System. To ensure
uniqueness, this may default to the value of
one of the router's IPv4 host addresses,
represen… | scalar | ExtremeOspfv3RouterIdTc | .1.3.6.1.4.1.1916.1.50.1.1.1 |
| extremeOspfv3ExtLsaCount The number of External(LS type 0x4005) in the
link state database | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.1916.1.50.1.1.10 |
| extremeOspfv3MulticastExtensions A Bit Mask indicating whether the router is
forwarding IPv6 multicast datagrams based on
the algorithms defined in the Multicast
Extensions to OSPF.
If intraAreaMultic… | scalar | Bits | .1.3.6.1.4.1.1916.1.50.1.1.12 |
| extremeOspfv3ExitOverflowInterval The number of seconds that, after entering
Overflow State, a router will attempt to leave
Overflow State. This allows the router to again
originate non-default, AS-External-LSAs. … | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1916.1.50.1.1.13 |
| extremeOspfv3DemandExtensions The router's support for demand routing. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1916.1.50.1.1.14 |
| extremeOspfv3ReferenceBandwidth Reference bandwidth in kilobits/second for
calculating default interface metrics. The
default value is 100,000 KBPS (100 MBPS) | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1916.1.50.1.1.15 |
| extremeOspfv3RestartSupport The router's support for OSPF Graceful restart.
Options include: no restart support, only planned
restarts or both planned and unplanned restarts. | scalar | Enumeration | .1.3.6.1.4.1.1916.1.50.1.1.16 |
| extremeOspfv3RestartInterval Configured OSPF Graceful restart timeout interval. | scalar | seconds ExtremeOspfv3UpToRefreshIntervalTc | .1.3.6.1.4.1.1916.1.50.1.1.17 |
| extremeOspfv3RestartStatus The current status of OSPF Graceful restart capability. | scalar | Enumeration | .1.3.6.1.4.1.1916.1.50.1.1.18 |
| extremeOspfv3RestartAge Remaining time in current OSPF Graceful restart
interval. | scalar | seconds ExtremeOspfv3UpToRefreshIntervalTc | .1.3.6.1.4.1.1916.1.50.1.1.19 |
| extremeOspfv3AdminStat The administrative status of OSPFv3 in the
router. The value 'enabled' denotes that the
OSPFv3 Process is active on at least one
interface; 'disabled' disables it on all
interface… | scalar | OSPF-MIBStatus | .1.3.6.1.4.1.1916.1.50.1.1.2 |
| extremeOspfv3RestartExitRc Describes the outcome of the last attempt at a
Graceful restart.
none:............no restart has yet been attempted.
inProgress:......a restart attempt is currently und… | scalar | Enumeration | .1.3.6.1.4.1.1916.1.50.1.1.20 |
| extremeOspfv3NotificationEnable This object provides a coarse level of control
over the generation of OSPFv3 notifications.
If this object is set to true (1), then it enables
the generation of OSPFv3 … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1916.1.50.1.1.21 |
| extremeOspfv3VersionNumber The version number of OSPF for IPv6 is 3. | scalar | Enumeration | .1.3.6.1.4.1.1916.1.50.1.1.3 |
| extremeOspfv3AreaBdrRtrStatus A flag to note whether this router is an area
border router. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1916.1.50.1.1.4 |
| extremeOspfv3ASBdrRtrStatus A flag to note whether this router is
configured as an Autonomous System border router. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1916.1.50.1.1.5 |
| extremeOspfv3AsScopeLsaCount The number of AS-Scope (e.g. AS-External) link state
advertisements in the link state database. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.1916.1.50.1.1.6 |
| extremeOspfv3AsScopeLsaCksumSum The 32-bit unsigned sum of the LS checksums of
the AS-scoped link state advertisements
contained in the link state database. This sum
can be used to determine if there has been … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1916.1.50.1.1.7 |
| extremeOspfv3OriginateNewLsas The number of new link-state advertisements
that have been originated. This number is
incremented each time the router originates a new
LSA. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1916.1.50.1.1.8 |
| extremeOspfv3RxNewLsas The number of link state advertisements
received determined to be new instantiations.
This number does not include newer
instantiations of self-originated link state
advertisement… | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1916.1.50.1.1.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| CPQHSV400V11-MIBhostName mandatory The Host Name. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.232.136.1.3.3.2.1.2 |
| CPQHSV400V11-MIBscellNameDateTime mandatory The StorageCell Name: Date & Time of Event. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.232.136.1.3.1.2.1.12 |
| CPQHSV400V11-MIBagentEventCode mandatory The management agent event code. | column | Integer32 | .1.3.6.1.4.1.232.136.1.1.7.1.3 |
| CPQHSV400V11-MIBagentEventDescription mandatory The Description of the management agent event. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.232.136.1.1.7.1.6 |