staPathCostMethod
ES4524M-PoE-MIB ·
.1.3.6.1.4.1.259.8.1.7.1.5.5
Object
scalar
r/w
StaPathCostMode
Indicates the type of spanning tree path cost mode configured
on the switch. This mode applies to all instances of the
spanning tree protocol running on the switch.
When the value of this MIB object is changed, the path cost of
all ports will be reassigned to the default path cost values
based on the new spanning tree path cost mode and the
ports' speed.
When the value of this MIB object is set to long(2), the
staPortLongPathCost MIB object must be used to retrieve/configure
the spanning tree port path cost as a 32-bit value.
The set operation on dot1dStpPortPathCost in BRIDGE-MIB will be rejected.
While retrieving the value of dot1dStpPortPathCost, the maximum
value of 65535 will be returned if the value of staPortLongPathCost
for the same instance exceeds 65535.
When the value of this MIB object is set to short(1), the
dot1dStpPortPathCost in BRIDGE-MIB must be used.
Context
- MIB
- ES4524M-PoE-MIB
- OID
.1.3.6.1.4.1.259.8.1.7.1.5.5- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- staMgt
- Siblings
- 6
Syntax
StaPathCostMode
- Source
- StaPathCostMode
- Base type
Enumeration
Values & Constraints
Type Values
1 | short |
2 | long |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| staSystemStatus Global spanning tree status.
(1) Spanning tree protocol is enabled.
(2) Spanning tree protocol is disabled. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.259.8.1.7.1.5.1 |
| staPortTable The table manages port settings for Spanning Tree
Protocol 802.1d, 802.1w or 802.1s depending on the
value specified by staProtocolType. | table | - | .1.3.6.1.4.1.259.8.1.7.1.5.2 |
| staProtocolType The version of Spanning Tree Protocol the bridge is currently
running. The value 'stp(1)' indicates the Spanning Tree
Protocol is as specified in IEEE 802.1D,'rstp(2)' indicates … | scalar | Enumeration | .1.3.6.1.4.1.259.8.1.7.1.5.3 |
| staTxHoldCount The value used by the Port Transmit state machine to limit
the maximum transmission rate. | scalar | Integer32 | .1.3.6.1.4.1.259.8.1.7.1.5.4 |
| xstMgt | node | - | .1.3.6.1.4.1.259.8.1.7.1.5.6 |
| staLoopbackDetectionPortTable A table provides the mechanism to configure the
spanning tree loopback detection of each port or trunk | table | - | .1.3.6.1.4.1.259.8.1.7.1.5.7 |