portSpeedDpxCfg

ES4524M-PoE-MIB · .1.3.6.1.4.1.259.8.1.7.1.2.1.1.4

Object

column r/w Enumeration

Configures the speed and duplex mode for a port or trunk,
according to:
    halfDuplex10(2)    - 10Mbps and half duplex mode
    fullDuplex10(3)    - 10Mbps and full duplex mode
    halfDuplex100(4)   - 100Mbps and half duplex mode
    fullDuplex100(5)   - 100Mbps and full duplex mode
    halfDuplex1000(6)  - 1000Mbps and half duplex mode
    fullDuplex1000(7)  - 1000Mbps and full duplex mode
   halfDuplex10g(8)   - 10g and half duplex mode
    fullDuplex10g(9)   - 10g and full duplex mode
              
   hundredBaseTX  port can be set as:
    halfDuplex10(2)
    fullDuplex10(3)
    halfDuplex100(4)
    fullDuplex100(5)
   hundredBaseFX  port can be set as:
       fullDuplex100(5)
   thousandBaseSX port can be set as:
       fullDuplex1000(7)
   thousandBaseLX port can be set as:
       fullDuplex1000(7)
   thousandBaseT port can be set as:
       halfDuplex10(2)
       fullDuplex10(3)
       halfDuplex100(4)
       fullDuplex100(5)
   thousandBaseGBIC port can be set as:
       fullDuplex1000(7)
   thousandBaseSfp port can be set as:
       fullDuplex1000(7)
   hundredBaseFxScSingleMode port can be set as:
       fullDuplex100(5)
   hundredBaseFxScMultiMode port can be set as:
       fullDuplex100(5)
   thousandBaseCX port can be set as:
       fullDuplex1000(7)
   tenG port can be set as:
       halfDuplex10g(8)
       fullDuplex10g(9)
              
The actual operating speed and duplex of the port
is given by portSpeedDpxStatus.

Context

MIB: ES4524M-PoE-MIB
OID: .1.3.6.1.4.1.259.8.1.7.1.2.1.1.4
Type: column
Access: readwrite
Status: current
Parent: portEntry
Table: portTable
Siblings: 10

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	reserved
`2`	halfDuplex10
`3`	fullDuplex10
`4`	halfDuplex100
`5`	fullDuplex100
`6`	halfDuplex1000
`7`	fullDuplex1000
`8`	halfDuplex10g
`9`	fullDuplex10g

Related Objects

Sibling Objects

Object	Type	Syntax	OID
portIndex The port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by th…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.259.8.1.7.1.2.1.1.1`
portTrunkIndex The trunk to which this port belongs. A value of 0 means that this port does not belong to any trunk. A value greater than zero means that this port belongs to a trunk in the trun…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.259.8.1.7.1.2.1.1.10`
portComboForcedMode This determines the running mode of a combo port. For a non-combo port, this variable has a value of none(1), and setting this variable to none(1) has no effect. For a combo port,…	column	Enumeration	`.1.3.6.1.4.1.259.8.1.7.1.2.1.1.12`
portName The name of the port or trunk. This is the same as ifAlias in the IF-MIB (RFC2863 or later).	column	OctetString	`.1.3.6.1.4.1.259.8.1.7.1.2.1.1.2`
portType Indicates the port type of the configuration of the switch.	column	Enumeration	`.1.3.6.1.4.1.259.8.1.7.1.2.1.1.3`
portFlowCtrlCfg (1) Flow control mechanism is enabled with tx and rx pause mechansim. If the port type is hundredBaseTX or thousandBaseSX: When the port is operating in halfDuplex mode, the port …	column	Enumeration	`.1.3.6.1.4.1.259.8.1.7.1.2.1.1.5`
portCapabilities Port or trunk capabilities.	column	Bits	`.1.3.6.1.4.1.259.8.1.7.1.2.1.1.6`
portAutonegotiation Whether auto-negotiation is enabled.	column	P-BRIDGE-MIBEnabledStatus	`.1.3.6.1.4.1.259.8.1.7.1.2.1.1.7`
portSpeedDpxStatus The operating speed and duplex mode of the switched port or trunk. If the entry represents a trunk, the speed is that of its individual members unless the member ports have been i…	column	Enumeration	`.1.3.6.1.4.1.259.8.1.7.1.2.1.1.8`
portFlowCtrlStatus (2) BackPressure flow control mechanism is used. (3) IEEE 802.3 flow control mechanism is used. (4) Flow control mechanism is disabled. If the entry represents a trunk and the mem…	column	Enumeration	`.1.3.6.1.4.1.259.8.1.7.1.2.1.1.9`