igmpSnoopQueryCount
ES4524M-PoE-MIB ·
.1.3.6.1.4.1.259.8.1.7.1.9.3
Object
scalar
r/w
Integer32
The query count from a querier, during which a response is expected from an endstation. If a querier has sent a number of counts defined by igmpSnoopQueryCount, but an endstation has not responded, a countdown timer is started using the time defined by igmpSnoopQueryMaxResponseTime. If the countdown finishes, and the endstation still has not responded, then that endstation is deemed to have left the multicast group.
Context
- MIB
- ES4524M-PoE-MIB
- OID
.1.3.6.1.4.1.259.8.1.7.1.9.3- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- igmpSnoopMgt
- Siblings
- 18
Syntax
Integer32
Values & Constraints
Object Constraints
range: 2-10
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| igmpSnoopStatus Parameter to enable or disable IGMP snooping on the device.
When enabled, the device will examine IGMP packets and set
up filters for IGMP ports. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.259.8.1.7.1.9.1 |
| igmpSnoopMulticastCurrentTable Table for current multicast addresses. | table | - | .1.3.6.1.4.1.259.8.1.7.1.9.10 |
| igmpSnoopMulticastStaticTable Table for static multicast addresses. | table | - | .1.3.6.1.4.1.259.8.1.7.1.9.11 |
| igmpSnoopCurrentVlanTable Table for enabling or disabling IGMP snooping per VLAN. | table | - | .1.3.6.1.4.1.259.8.1.7.1.9.14 |
| igmpSnoopLeaveProxy This enables or disables Leave Proxy for IGMP Snooping. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.259.8.1.7.1.9.15 |
| igmpSnoopFilterStatus Parameter to enable or disable IGMP filtering on the device. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.259.8.1.7.1.9.17 |
| igmpSnoopProfileTable The table for configuring the IGMP snooping profile. | table | - | .1.3.6.1.4.1.259.8.1.7.1.9.18 |
| igmpSnoopProfileCtl | node | - | .1.3.6.1.4.1.259.8.1.7.1.9.19 |
| igmpSnoopQuerier Enables (disables) whether the switch acts as an IGMP
querier. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.259.8.1.7.1.9.2 |
| igmpSnoopProfileRangeTable The table for configuring the range of the IGMP snooping profile. | table | - | .1.3.6.1.4.1.259.8.1.7.1.9.20 |
| igmpSnoopFilterPortTable Table for port configuration in IGMP filtering. | table | - | .1.3.6.1.4.1.259.8.1.7.1.9.21 |
| igmpSnoopThrottlePortTable Table for port configuration in IGMP throttling. | table | - | .1.3.6.1.4.1.259.8.1.7.1.9.22 |
| igmpSnoopQueryInterval The interval (in seconds) between IGMP host-query
messages sent by the switch. | scalar | Integer32 | .1.3.6.1.4.1.259.8.1.7.1.9.4 |
| igmpSnoopQueryMaxResponseTime The time after a query, during which a response is
expected from an endstation. If a querier has sent
a number of queries defined by igmpSnoopQueryCount,
but an endstation has not… | scalar | Integer32 | .1.3.6.1.4.1.259.8.1.7.1.9.5 |
| igmpSnoopRouterPortExpireTime Sets the time (in seconds) the switch waits after
the previous querier has stopped querying before
the router port (which received query packets from
previous querier) expires. | scalar | Integer32 | .1.3.6.1.4.1.259.8.1.7.1.9.6 |
| igmpSnoopVersion IGMP version snooped | scalar | Integer32 | .1.3.6.1.4.1.259.8.1.7.1.9.7 |
| igmpSnoopRouterCurrentTable Table for current router ports. | table | - | .1.3.6.1.4.1.259.8.1.7.1.9.8 |
| igmpSnoopRouterStaticTable Table for static router ports. | table | - | .1.3.6.1.4.1.259.8.1.7.1.9.9 |