igmpSnoopFilterStatus
ES4524M-PoE-MIB ·
.1.3.6.1.4.1.259.8.1.7.1.9.17
Object
Parameter to enable or disable IGMP filtering on the device.
Context
- MIB
- ES4524M-PoE-MIB
- OID
.1.3.6.1.4.1.259.8.1.7.1.9.17- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- igmpSnoopMgt
- Siblings
- 18
Syntax
P-BRIDGE-MIBEnabledStatus
- Source
- P-BRIDGE-MIBEnabledStatus
- Base type
Enumeration
Values & Constraints
Type Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| igmpSnoopStatus Parameter to enable or disable IGMP snooping on the device.
When enabled, the device will examine IGMP packets and set
up filters for IGMP ports. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.259.8.1.7.1.9.1 |
| igmpSnoopMulticastCurrentTable Table for current multicast addresses. | table | - | .1.3.6.1.4.1.259.8.1.7.1.9.10 |
| igmpSnoopMulticastStaticTable Table for static multicast addresses. | table | - | .1.3.6.1.4.1.259.8.1.7.1.9.11 |
| igmpSnoopCurrentVlanTable Table for enabling or disabling IGMP snooping per VLAN. | table | - | .1.3.6.1.4.1.259.8.1.7.1.9.14 |
| igmpSnoopLeaveProxy This enables or disables Leave Proxy for IGMP Snooping. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.259.8.1.7.1.9.15 |
| igmpSnoopProfileTable The table for configuring the IGMP snooping profile. | table | - | .1.3.6.1.4.1.259.8.1.7.1.9.18 |
| igmpSnoopProfileCtl | node | - | .1.3.6.1.4.1.259.8.1.7.1.9.19 |
| igmpSnoopQuerier Enables (disables) whether the switch acts as an IGMP
querier. | scalar | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.259.8.1.7.1.9.2 |
| igmpSnoopProfileRangeTable The table for configuring the range of the IGMP snooping profile. | table | - | .1.3.6.1.4.1.259.8.1.7.1.9.20 |
| igmpSnoopFilterPortTable Table for port configuration in IGMP filtering. | table | - | .1.3.6.1.4.1.259.8.1.7.1.9.21 |
| igmpSnoopThrottlePortTable Table for port configuration in IGMP throttling. | table | - | .1.3.6.1.4.1.259.8.1.7.1.9.22 |
| igmpSnoopQueryCount The query count from a querier, during which a response is
expected from an endstation. If a querier has sent a
number of counts defined by igmpSnoopQueryCount, but an
endstation … | scalar | Integer32 | .1.3.6.1.4.1.259.8.1.7.1.9.3 |
| igmpSnoopQueryInterval The interval (in seconds) between IGMP host-query
messages sent by the switch. | scalar | Integer32 | .1.3.6.1.4.1.259.8.1.7.1.9.4 |
| igmpSnoopQueryMaxResponseTime The time after a query, during which a response is
expected from an endstation. If a querier has sent
a number of queries defined by igmpSnoopQueryCount,
but an endstation has not… | scalar | Integer32 | .1.3.6.1.4.1.259.8.1.7.1.9.5 |
| igmpSnoopRouterPortExpireTime Sets the time (in seconds) the switch waits after
the previous querier has stopped querying before
the router port (which received query packets from
previous querier) expires. | scalar | Integer32 | .1.3.6.1.4.1.259.8.1.7.1.9.6 |
| igmpSnoopVersion IGMP version snooped | scalar | Integer32 | .1.3.6.1.4.1.259.8.1.7.1.9.7 |
| igmpSnoopRouterCurrentTable Table for current router ports. | table | - | .1.3.6.1.4.1.259.8.1.7.1.9.8 |
| igmpSnoopRouterStaticTable Table for static router ports. | table | - | .1.3.6.1.4.1.259.8.1.7.1.9.9 |