swERPSMgmtRAPSRingAdminState
ERPS-MIB ·
.1.3.6.1.4.1.171.12.78.3.1.1.14
Object
column
r/w
Enumeration
This indicates the administrative state of the ring.
Context
- MIB
- ERPS-MIB
- OID
.1.3.6.1.4.1.171.12.78.3.1.1.14- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- swERPSMgmtRAPSVlanEntry
- Table
- swERPSMgmtRAPSVlanTable
- Siblings
- 28
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| swERPSMgmtRAPSVlanId The RAPS VLAN is an index of the configuration. | column | Integer32 | .1.3.6.1.4.1.171.12.78.3.1.1.1 |
| swERPSMgmtRAPSHoldOffTime In order to coordinate the timing of protection switches at multiple layers. | column | Integer32 | .1.3.6.1.4.1.171.12.78.3.1.1.10 |
| swERPSMgmtRAPSRowStatus This object indicates the RowStatus of this entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.171.12.78.3.1.1.100 |
| swERPSMgmtRAPSGuardTime This is used to prevent ring nodes from receiving outdated RAPS messages. | column | Integer32 | .1.3.6.1.4.1.171.12.78.3.1.1.11 |
| swERPSMgmtRAPSWTRTime When revertive is enabled, this is used to prevent frequent
operation of the protection switch due to an intermittent defect.
A failed working transport entity must become stabl… | column | Integer32 | .1.3.6.1.4.1.171.12.78.3.1.1.12 |
| swERPSMgmtRAPSRingState This indicates the state of the ring.The available states
are: begin, init, idle, or protection. | column | Enumeration | .1.3.6.1.4.1.171.12.78.3.1.1.13 |
| swERPSMgmtRAPSRPLOwnerOperStatus The current operational value of the RPL owner state. The value 'active'
is used to indicate that the RPL owner administrative state is enabled
and the device is operating as th… | column | Enumeration | .1.3.6.1.4.1.171.12.78.3.1.1.15 |
| swERPSMgmtRAPSProtectionVlanRangeList1to64 This object indicates the VLAN range (1-512)
that belong to the protected VLANs. | column | OctetString | .1.3.6.1.4.1.171.12.78.3.1.1.16 |
| swERPSMgmtRAPSProtectionVlanRangeList65to128 This object indicates the VLAN range (513-1024)
that belong to the protected VLANs. | column | OctetString | .1.3.6.1.4.1.171.12.78.3.1.1.17 |
| swERPSMgmtRAPSProtectionVlanRangeList129to192 This object indicates the VLAN range (1025-1536)
that belong to the protected VLANs. | column | OctetString | .1.3.6.1.4.1.171.12.78.3.1.1.18 |
| swERPSMgmtRAPSProtectionVlanRangeList193to256 This object indicates the VLAN range (1537-2048)
that belong to the protected VLANs. | column | OctetString | .1.3.6.1.4.1.171.12.78.3.1.1.19 |
| swERPSMgmtRAPSWestPort This is one of the RPL owner ports.The RPL owner may block this port.
The value 0 indicates the west port is a virtual channel. | column | Integer32 | .1.3.6.1.4.1.171.12.78.3.1.1.2 |
| swERPSMgmtRAPSProtectionVlanRangeList257to320 This object indicates the VLAN range (2049-2560)
that belong to the protected VLANs. | column | OctetString | .1.3.6.1.4.1.171.12.78.3.1.1.20 |
| swERPSMgmtRAPSProtectionVlanRangeList321to384 This object indicates the VLAN range (2561-3072)
that belongs to the protected VLANs. | column | OctetString | .1.3.6.1.4.1.171.12.78.3.1.1.21 |
| swERPSMgmtRAPSProtectionVlanRangeList385to448 This object indicates the VLAN range (3073-3584)
that belong to the protected VLANs. | column | OctetString | .1.3.6.1.4.1.171.12.78.3.1.1.22 |
| swERPSMgmtRAPSProtectionVlanRangeList449to512 This object indicates the VLAN range (3585-4096)
that belong to the protected VLANs. | column | OctetString | .1.3.6.1.4.1.171.12.78.3.1.1.23 |
| swERPSMgmtRAPSRevertive The object is used to enable or disable the revertive operation of a special
ring. When revertive is disabled, the traffic link is allowed to use the RPL,
after revovering from … | column | Enumeration | .1.3.6.1.4.1.171.12.78.3.1.1.24 |
| swERPSMgmtRAPSOperWestPort This object indicates actual running ring west port.
The value 0 indicates the west port is a virtual channel. | column | Integer32 | .1.3.6.1.4.1.171.12.78.3.1.1.25 |
| swERPSMgmtRAPSOperEastPort This object indicates actual running ring east port.
The value 0 indicates the east port is a virtual channel. | column | Integer32 | .1.3.6.1.4.1.171.12.78.3.1.1.26 |
| swERPSMgmtRAPSOperRPLPort This object indicates actual running ring RPL port. | column | Enumeration | .1.3.6.1.4.1.171.12.78.3.1.1.27 |
| swERPSMgmtRAPSRPLOwnerOperState This object indicates actual running RPL owner state. | column | Enumeration | .1.3.6.1.4.1.171.12.78.3.1.1.28 |
| swERPSMgmtRAPSWestPortState This is the west port state. The state may change occasionally.
When the west port is configured on a virtual channel, the west
port state is always forwarding. | column | Enumeration | .1.3.6.1.4.1.171.12.78.3.1.1.3 |
| swERPSMgmtRAPSEastPort This is the other RPL owner port.The RPL Owner may block this port.
The value 0 indicates the west port is a virtual channel. | column | Integer32 | .1.3.6.1.4.1.171.12.78.3.1.1.4 |
| swERPSMgmtRAPSEastPortState This is the east port state. The state may change occasionally.
When the east port is configured on a virtual channel, the east
port state is always forwarding. | column | Enumeration | .1.3.6.1.4.1.171.12.78.3.1.1.5 |
| swERPSMgmtRAPSRPLPort When the port enable state is enabled, the RPL port's current
port role is defined by the ERPS application. | column | Enumeration | .1.3.6.1.4.1.171.12.78.3.1.1.6 |
| swERPSMgmtRAPSRPLOwnerAdminState The administrative value of the RPL owner state.
The RPL owner is an Ethernet Ring Node adjacent to the RPL that
is responsible for blocking its end of the RPL under normal
con… | column | Enumeration | .1.3.6.1.4.1.171.12.78.3.1.1.7 |
| swERPSMgmtRAPSProtectionVlan The protection VLAN has prevented a loop. | column | VidList | .1.3.6.1.4.1.171.12.78.3.1.1.8 |
| swERPSMgmtRAPSRingMEL The ring MEL is the maintenance entity group (MEG) level that
provides a communication channel for the ring automatic protection
switching (RAPS) information. | column | Integer32 | .1.3.6.1.4.1.171.12.78.3.1.1.9 |