swERPSMgmtRAPSOperWestPort

ERPS-MIB · .1.3.6.1.4.1.171.12.78.3.1.1.25
MIB view Table view

Object

column Integer32 
This object indicates actual running ring west port.
The value 0 indicates the west port is a virtual channel.

Context

MIB
ERPS-MIB
OID
.1.3.6.1.4.1.171.12.78.3.1.1.25
Type
column
Access
readonly
Status
current
Parent
swERPSMgmtRAPSVlanEntry
Table
swERPSMgmtRAPSVlanTable
Siblings
28

Syntax

Integer32

Values & Constraints

Object Constraints
range: 0-65535

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
swERPSMgmtRAPSVlanId
The RAPS VLAN is an index of the configuration.
columnInteger32.1.3.6.1.4.1.171.12.78.3.1.1.1
swERPSMgmtRAPSHoldOffTime
In order to coordinate the timing of protection switches at multiple layers.
columnInteger32.1.3.6.1.4.1.171.12.78.3.1.1.10
swERPSMgmtRAPSRowStatus
This object indicates the RowStatus of this entry.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.171.12.78.3.1.1.100
swERPSMgmtRAPSGuardTime
This is used to prevent ring nodes from receiving outdated RAPS messages.
columnInteger32.1.3.6.1.4.1.171.12.78.3.1.1.11
swERPSMgmtRAPSWTRTime
When revertive is enabled, this is used to prevent frequent operation of the protection switch due to an intermittent defect. A failed working transport entity must become stabl…
columnInteger32.1.3.6.1.4.1.171.12.78.3.1.1.12
swERPSMgmtRAPSRingState
This indicates the state of the ring.The available states are: begin, init, idle, or protection.
columnEnumeration.1.3.6.1.4.1.171.12.78.3.1.1.13
swERPSMgmtRAPSRingAdminState
This indicates the administrative state of the ring.
columnEnumeration.1.3.6.1.4.1.171.12.78.3.1.1.14
swERPSMgmtRAPSRPLOwnerOperStatus
The current operational value of the RPL owner state. The value 'active' is used to indicate that the RPL owner administrative state is enabled and the device is operating as th…
columnEnumeration.1.3.6.1.4.1.171.12.78.3.1.1.15
swERPSMgmtRAPSProtectionVlanRangeList1to64
This object indicates the VLAN range (1-512) that belong to the protected VLANs.
columnOctetString.1.3.6.1.4.1.171.12.78.3.1.1.16
swERPSMgmtRAPSProtectionVlanRangeList65to128
This object indicates the VLAN range (513-1024) that belong to the protected VLANs.
columnOctetString.1.3.6.1.4.1.171.12.78.3.1.1.17
swERPSMgmtRAPSProtectionVlanRangeList129to192
This object indicates the VLAN range (1025-1536) that belong to the protected VLANs.
columnOctetString.1.3.6.1.4.1.171.12.78.3.1.1.18
swERPSMgmtRAPSProtectionVlanRangeList193to256
This object indicates the VLAN range (1537-2048) that belong to the protected VLANs.
columnOctetString.1.3.6.1.4.1.171.12.78.3.1.1.19
swERPSMgmtRAPSWestPort
This is one of the RPL owner ports.The RPL owner may block this port. The value 0 indicates the west port is a virtual channel.
columnInteger32.1.3.6.1.4.1.171.12.78.3.1.1.2
swERPSMgmtRAPSProtectionVlanRangeList257to320
This object indicates the VLAN range (2049-2560) that belong to the protected VLANs.
columnOctetString.1.3.6.1.4.1.171.12.78.3.1.1.20
swERPSMgmtRAPSProtectionVlanRangeList321to384
This object indicates the VLAN range (2561-3072) that belongs to the protected VLANs.
columnOctetString.1.3.6.1.4.1.171.12.78.3.1.1.21
swERPSMgmtRAPSProtectionVlanRangeList385to448
This object indicates the VLAN range (3073-3584) that belong to the protected VLANs.
columnOctetString.1.3.6.1.4.1.171.12.78.3.1.1.22
swERPSMgmtRAPSProtectionVlanRangeList449to512
This object indicates the VLAN range (3585-4096) that belong to the protected VLANs.
columnOctetString.1.3.6.1.4.1.171.12.78.3.1.1.23
swERPSMgmtRAPSRevertive
The object is used to enable or disable the revertive operation of a special ring. When revertive is disabled, the traffic link is allowed to use the RPL, after revovering from …
columnEnumeration.1.3.6.1.4.1.171.12.78.3.1.1.24
swERPSMgmtRAPSOperEastPort
This object indicates actual running ring east port. The value 0 indicates the east port is a virtual channel.
columnInteger32.1.3.6.1.4.1.171.12.78.3.1.1.26
swERPSMgmtRAPSOperRPLPort
This object indicates actual running ring RPL port.
columnEnumeration.1.3.6.1.4.1.171.12.78.3.1.1.27
swERPSMgmtRAPSRPLOwnerOperState
This object indicates actual running RPL owner state.
columnEnumeration.1.3.6.1.4.1.171.12.78.3.1.1.28
swERPSMgmtRAPSWestPortState
This is the west port state. The state may change occasionally. When the west port is configured on a virtual channel, the west port state is always forwarding.
columnEnumeration.1.3.6.1.4.1.171.12.78.3.1.1.3
swERPSMgmtRAPSEastPort
This is the other RPL owner port.The RPL Owner may block this port. The value 0 indicates the west port is a virtual channel.
columnInteger32.1.3.6.1.4.1.171.12.78.3.1.1.4
swERPSMgmtRAPSEastPortState
This is the east port state. The state may change occasionally. When the east port is configured on a virtual channel, the east port state is always forwarding.
columnEnumeration.1.3.6.1.4.1.171.12.78.3.1.1.5
swERPSMgmtRAPSRPLPort
When the port enable state is enabled, the RPL port's current port role is defined by the ERPS application.
columnEnumeration.1.3.6.1.4.1.171.12.78.3.1.1.6
swERPSMgmtRAPSRPLOwnerAdminState
The administrative value of the RPL owner state. The RPL owner is an Ethernet Ring Node adjacent to the RPL that is responsible for blocking its end of the RPL under normal con…
columnEnumeration.1.3.6.1.4.1.171.12.78.3.1.1.7
swERPSMgmtRAPSProtectionVlan
The protection VLAN has prevented a loop.
columnVidList.1.3.6.1.4.1.171.12.78.3.1.1.8
swERPSMgmtRAPSRingMEL
The ring MEL is the maintenance entity group (MEG) level that provides a communication channel for the ring automatic protection switching (RAPS) information.
columnInteger32.1.3.6.1.4.1.171.12.78.3.1.1.9