eqlStoragePoolSnapMemberTrimThresholdAmount
EQLSTORAGEPOOL-MIB ·
.1.3.6.1.4.1.12740.16.1.1.1.20
Object
This field specifies the per member trimming threshold used by the trimmer in MB. The default value of 204800 MB (200 GB) represents the minimum value for this field.
Context
- MIB
- EQLSTORAGEPOOL-MIB
- OID
.1.3.6.1.4.1.12740.16.1.1.1.20- Type
- column
- Access
- readwrite
- Status
- current
- Units
- MB
- Parent
- eqlStoragePoolEntry
- Table
- eqlStoragePoolTable
- Siblings
- 20
Syntax
MB SNMPv2-SMICounter64
- Source
- SNMPv2-SMICounter64
- Base type
Unsigned64
Values & Constraints
Type Constraints
range: 0..18446744073709551615
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eqlStoragePoolIndex This field specifies a unique index for identifying a storage pool. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.16.1.1.1.1 |
| eqlStoragePoolUUID EQL-SECONDARY-KEY
This field is for internal use only. | column | OctetString | .1.3.6.1.4.1.12740.16.1.1.1.10 |
| eqlStoragePoolExecMergeTo This field, when non-zero, specifies the index of the storage pool that this pool is being merged into. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.16.1.1.1.11 |
| eqlStoragePoolBorrow This field specifies if borrowing is enabled for this pool. | column | StatusEnabledDefault | .1.3.6.1.4.1.12740.16.1.1.1.12 |
| eqlStoragePoolSnapTrimThreshold This field specifies the threshold % of the pool capacity that indicates when to begin trimming. | column | % Unsigned32 | .1.3.6.1.4.1.12740.16.1.1.1.13 |
| eqlStoragePoolSnapTrimBuffer This field specifies how far below the SnapTrimThreshold to trim in MB. | column | MB SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.16.1.1.1.14 |
| eqlStoragePoolSnapTrimmerHWMLifeTime This field defines the amount of time (in secs) that the trimmer will use Volume
In Use HWM to calculate the borrowed space for the thin volume. Default is 10 days | column | secs SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12740.16.1.1.1.15 |
| eqlStoragePoolSnapTrimmerBorrowInfoRefreshInterval This field defines the amount of time (in secs) after which
the snap trimmer will attempt to refresh its borrow information | column | secs SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12740.16.1.1.1.16 |
| eqlStoragePoolDefaultCompressionStrategy Default value for how compression for snapshots should be set if not specified. | column | Enumeration | .1.3.6.1.4.1.12740.16.1.1.1.17 |
| eqlStoragePoolDefaultCompressionMinSnapDelay The value of this object represents how long to wait prior
to marking a snapshot as eligible for automatic compression.
Current default is 10 minutes. | column | minutes SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12740.16.1.1.1.18 |
| eqlStoragePoolDefaultCompressionMinSnapAge The value of this object represents the minimum amout of time
a snapshot is expected to kept around in order to be marked
for automatic compression. Current default is 23 hours. | column | minutes SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12740.16.1.1.1.19 |
| eqlStoragePoolRowStatus This field is used indicate the status of this entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.12740.16.1.1.1.2 |
| eqlStoragePoolSnapTrimRecheckTimer This field defines the interval (in seconds) that will be used to determine if
trimming needs to occur. | column | secs SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.16.1.1.1.21 |
| eqlStoragePoolName EQL-SECONDARY-KEY
This field specifies a user friendly name for a storage pool.
The name must be unique within a group.
The name must not contain spaces or special characters.
The… | column | OctetString | .1.3.6.1.4.1.12740.16.1.1.1.3 |
| eqlStoragePoolDefaultFlag This field specifies if this storage pool is the default pool. TRUE == default pool. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.16.1.1.1.4 |
| eqlStoragePoolRAIDConfigWaitFlag This field specifies if the system should wait for a
configured RAID-set before allowing volumes to be
created. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.16.1.1.1.5 |
| eqlStoragePoolShouldEvalMask This field specifies one or more reasons (32-bit mask) the pool should be evaluated. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.16.1.1.1.6 |
| eqlStoragePoolLastBalance This field specifies a timestamp of the last time the pool was balanced. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.16.1.1.1.7 |
| eqlStoragePoolDescription This field contains a description of the storage pool. | column | OctetString | .1.3.6.1.4.1.12740.16.1.1.1.8 |
| eqlStoragePoolLeadMemberId deprecated This field is deprecated and will be unsupported in the next release. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.16.1.1.1.9 |