eqlMemberHealthlowAmbientTemp
EQLMEMBER-MIB ·
.1.3.6.1.4.1.12740.2.2.1.18
Object
notification
Sent when one or more sensors is below its critical temperature range.
Context
- MIB
- EQLMEMBER-MIB
- OID
.1.3.6.1.4.1.12740.2.2.1.18- Type
- notification
- Status
- current
- Parent
- eqlMemberEnclosureMgmtNotifications
- Siblings
- 24
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eqlMemberHealthTempSensorHighThreshold Sent when a high threshold has been exceeded for any of the
enclosure temp sensors. The implementation of this trap should
not send more than one notification of this type for a… | notification | - | .1.3.6.1.4.1.12740.2.2.1.1 |
| eqlMemberHealthFanTrayRemoved Sent when one of the fan trays have been removed from the
chassis. This results in overheating | notification | - | .1.3.6.1.4.1.12740.2.2.1.10 |
| eqlMemberHealthRAIDSetLostBlkTableFull Sent when the RAID lost block table is full.
This usually is an indication of lost data. | notification | - | .1.3.6.1.4.1.12740.2.2.1.11 |
| eqlMemberHealthBatteryLessThan72Hours Sent when the battery has insufficient charge to survive
a 72 hour power outage. | notification | - | .1.3.6.1.4.1.12740.2.2.1.12 |
| eqlMemberHealthRaidOrphanCache Sent when the RAID driver finds data in the battery-backed cache with no matching disk array. Initialization will not proceed without user intervention. Call EqualLogic Support f… | notification | - | .1.3.6.1.4.1.12740.2.2.1.13 |
| eqlMemberHealthRaidMultipleRaidSets Sent when multiple valid RAIDsets were found. The array cannot choose which one to initialize. Remove all but one valid RAIDset and power-cycle the array. | notification | - | .1.3.6.1.4.1.12740.2.2.1.14 |
| eqlMemberHealthNVRAMBatteryFailed Sent when the NVRAM battery fails . The NVRAM can no longer be used. | notification | - | .1.3.6.1.4.1.12740.2.2.1.15 |
| eqlMemberHealthhwComponentFailedCrit Sent when a critical hardware component has failed. | notification | - | .1.3.6.1.4.1.12740.2.2.1.16 |
| eqlMemberHealthincompatControlModule Sent when An incorrect control module has been inserted into the chassis. | notification | - | .1.3.6.1.4.1.12740.2.2.1.17 |
| eqlMemberHealthopsPanelFailure Sent when Ops Panel is missing or broken. | notification | - | .1.3.6.1.4.1.12740.2.2.1.19 |
| eqlMemberHealthTempSensorLowThreshold Sent when a low threshold has been exceeded for any of the
enclosure temp sensors. The implementation of this trap should
not send more than one notification of this type for a … | notification | - | .1.3.6.1.4.1.12740.2.2.1.2 |
| eqlMemberHealthemmLinkFailure Sent when enclosure management services are unavailable. | notification | - | .1.3.6.1.4.1.12740.2.2.1.20 |
| eqlMemberHealthhighBatteryTemperature Sent when the cache battery temperature exceeds upper limit; battery charger is disabled. | notification | - | .1.3.6.1.4.1.12740.2.2.1.21 |
| eqlMemberHealthenclosureOpenPerm Sent when the enclosure is open for a long time. | notification | - | .1.3.6.1.4.1.12740.2.2.1.22 |
| eqlMemberHealthsumoChannelBothMissing Sent when both the Sumo Channel cards go missing. | notification | - | .1.3.6.1.4.1.12740.2.2.1.23 |
| eqlMemberHealthsumoEIPFailureCOndition Sent when EIP failed in Sumo. | notification | - | .1.3.6.1.4.1.12740.2.2.1.24 |
| eqlMemberHealthsumoChannelBothFailed Sent when both the Sumo Channel cards go into failed state. | notification | - | .1.3.6.1.4.1.12740.2.2.1.25 |
| eqlMemberHealthFanSpeedHighThreshold Sent when a high threshold has been exceeded for any of the
enclosure fan speed sensors. The implementation of this trap should
not send more than one notification of this type … | notification | - | .1.3.6.1.4.1.12740.2.2.1.3 |
| eqlMemberHealthFanSpeedLowThreshold Sent when a low threshold has been exceeded for any of the
enclosure fan speed sensors. The implementation of this trap should
not send more than one notification of this type f… | notification | - | .1.3.6.1.4.1.12740.2.2.1.4 |
| eqlMemberHealthPowerSupplyFanFailure Sent when a failure has been detected on any of the power
supply fan speed sensors. The implementation of this trap should
not send more than one notification of this type for… | notification | - | .1.3.6.1.4.1.12740.2.2.1.5 |
| eqlMemberHealthPowerSupplyFailure Sent when a failure has been detected on any of the power
supplys in the PSA. The implementation of this trap should
not send more than one notification of this type for a sen… | notification | - | .1.3.6.1.4.1.12740.2.2.1.6 |
| eqlMemberHealthRAIDSetDoubleFaulted Sent when the raid set has been detected to have double faulted. When
this occurs, the array will not come up.
User intervention is required to correct the issue | notification | - | .1.3.6.1.4.1.12740.2.2.1.7 |
| eqlMemberHealthBothFanTraysRemoved Sent when both of the fan trays have been removed from the
chassis. This results in overheating | notification | - | .1.3.6.1.4.1.12740.2.2.1.8 |
| eqlMemberHealthRAIDlostCache Sent because the RAID driver is unable to recover the
battery-backed cache. The disk array will not initialize
without user intervention. See the Handling Lost Data section
i… | notification | - | .1.3.6.1.4.1.12740.2.2.1.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eqlMemberHealthStatus The value of this object is determinted by the severity of the
health condition state variables. The most severe state will
be reflected. | column | Enumeration | .1.3.6.1.4.1.12740.2.1.5.1.1 |